Reviews Mini Tower Case

Thermaltake Tower 100 Racing Green Edition Tempered Glass Mini Tower Computer Chassis Supports Mini-ITX CA-1R3-00SCWN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
  • 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock

GeeekPi Raspberry Pi Mini Tower Kit, Raspberry Pi 4 Case with ICE Tower Cooler, 0.96'' OLED Module, RGB Cooling Fan, Raspberry Pi Heatsink,GPIO 1 to 2 Expansion Boardfor Raspberry Pi 4B

  • Only Compatible with Raspberry Pi 4B. For 3B+/3B Version,please refer to ASIN: B0B81G6FPC.
  • ABS Mini Tower Case is made of ABS material, with very high precision, and the 45-degree OLED screen display angle is more convenient to observe system information. The screen holder adopts a quick-release design, and the interior of the shell includes a design for arranging cables, which is convenient for arranging cables..
  • The interface adopts With a fool-proof design to avoid problems caused by wrong wiring, the installation is simpler and more convenient..
  • The screen driver board contains RGB three-color programmable LED ambient light, which can better render the light color according to your own needs..
  • The ice tower radiator included in the kit can not only provide good heat dissipation, but also increase the appearance..
  • Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ), 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in the package).
Check Stock

AMANSON PC CASE ATX Mid Tower Case Tempered Glass Gaming Computer Case Without ARGB Fan Black

  • [Powerful Cooling System] AMANSON H6 Mid tower PC case can accommodate 10 ARGB 120mm fans to provide lighting while maintaining good airflow.Amanson PC cases support, ATX, Micro ATX and Mini ITX motherboards..
  • [Unique Design] H6 ATX Gaming Case is equipped with tempered glass on the front and left side of the case, allowing a clear view of the RGB lighting and the components inside the building, creating a great gaming atmosphere..
  • [More Space] AMANSON H6 Mid tower computer case with extra space inside, maximum length 360mm GPU, top of PC case designed for mounting 360/280/240mm radiator..
  • [Top I/O Panel] 1 USB3.0 port, 1*Type-c,1 HD audio, power button.ATX gaming case provides more convenience and entertainment for gamer..
  • [Super Cable Management] Back Bays:3.5*1 HDD's and 4 *2.5'' SSD's.H8 mid tower gaming pc case comes with 1 dust filter , a large space behind the motherboard tray for hidden cable management, this area will help you clean up the interior and improve airflow..
Check Stock

Thermaltake Tower 100 Metallic Gold Edition Tempered Glass Type-C (USB 3.1 Gen 2) Mini Tower Computer Chassis Supports Mini-ITX CA-1R3-00SDWN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
  • 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

Thermaltake Tower 100 Black Edition Tempered Glass Type-C USB 3.1 Gen 2 Mini Tower Computer Chassis supports Mini-ITX CA-1R3-00S1WN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case the Tower 900.
  • 4mm Thick Tempered Glass Window Panels: Three 4 millimeter thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: With a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

GeeekPi Mini Tower UPS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, Raspberry Pi UPS Plus Hat, 0.96 inch OLED Display, GPIO 1 to 2 Expansion Board for Raspberry Pi 4 Model B

  • Support OLED display, UPS Plus integration, ICE Tower Cooler integration..
  • The 0.96 inch OLED screen was already mounted on the case. It can display the running status of Raspberry Pi or UPS Plus through programming, such as Raspberry Pi’s IP address, CPU temperature, disk utilization, CUP load, memory status and other system information..
  • The fan on super ICE Tower Cooler upgraded to PWM RGB fan. Tower structure, 5mm copper tube, multi-layer heat sinks, 7 blades powerful fan, all the above combinations make this super radiator for Raspberry Pi. In the case of overclocking, it can reduce the temperature of the Raspberry Pi from 80℃ to 40℃..
  • The UPS Plus hat will charge the batteries while providing power output at the same time from an external power source and it can automatically switch to batteries output when external power supply is unavailable, keeping the system running trouble-free. It also can power Raspberry Pi via Pogo Pins without using any GPIO resources..
  • Package Includes: 1 x ABS Mini Tower Case, 2 x Acrylic side panel,1 x 0.96 inch OLED Display(already mounted on the case ),1 x UPS Plus Hat, 1 x ICE Tower Cooler, 1x GPIO Edge Extention,1x Assembly Manual (Note: Raspberry Pi 4B is Not included in ....
Check Stock

GIM ATX Mid-Tower Case White Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready

  • 【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve air performance. Mid tower gaming PC Case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can transmit data without interference..
  • 【No Risk to Purchase】: Any quality issue with your case, please feel free to contact us and let us....
Check Stock

GIM ATX Mid-Tower Case Black Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready (Black)

  • 【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve cooling performance. Mid tower gaming PC Case is equipped with 1pcs dust filter, and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that y....
Check Stock

MOROVOL ATX PC Case with 4PCS RGB Fans Airflow Mid-Tower Gaming case with Diamond-Shaped Mesh Front & Tempered Glass Side Panel Computer Case 621-N4

  • 4PCS RGB Fans for Gifts - The 621 pc case is pre-installed with 4 RGB 120mm case fans, which are fixed RGB lighting capable and can provide....
  • Perfect Airflow - The diamond mesh front panel of this ATX case is the optimal cooling performance panel that features a stereo contour. While this....
  • Precise Design - Morovol 621-N4 computer case supports ATX / Micro-ATX / Mini-ITX, the GPU is up to 300mm, the PSU is up to 160mm and the CPU cooling....
  • Tempered Glass Side Panel - The Mid-tower case is designed with removable tempered glass side panel. The precise design makes this tower case both....
  • Excellent I/O Panel - The 621 gaming case provides fast and easy access to the I/O panel, with 1 USB 3.0 port (faster data transfer), 2 USB 2.0 ports,....
Check Stock

In Win EN708 Micro ATX Mini Tower Computer Case only, 5.25" Drive Bay x 1, USB 3.0 Front Ports x 2, HD Audio

  • Front I/O Panel: 2 x USB 3.0 Ports, HD Audio.
Check Stock

Anime Computer Case ATX Mid Tower PC Gaming Case - Front USB Port - Quick-Release Tempered Glass Side Panel - Cable Management System - Water-Cooling Ready - Pink,A,

  • [Powerful cooling ]-- C580 PC case is pre-installed 2 RGB luminous light boards. The unique open design can keep the GPU Temperature continuously low,making your computer work more smoothly..
  • [2 Tempered glass]-- C580 gaming case is equipped 2 * 4mm thick tempered glass, which can clearly see the RGB lighting and the components in the building, Creating a good gaming atmosphere..
  • [SYNC RGB]-- KEDIERS Tower Case light boards can be controlled by computer software/remote control (equipped)..
  • [I/O Panel]-- 2 x USB3.0 Port, 1 x USB2.0 Port, 1 x HD Audio, Power Button..
  • [Cable Management]-- Back Bays: 1x 3.5'' HDD's and 2 x 2.5'' SSD's. Removable storage cable box.
  • [Remarkable Expansion]-- C580 Mid Tower Gaming Computer Case supports ATX/Micro-ATX/Mini-ITX motherboards..
Check Stock