Brightlink 455WI 2500 Lumens 1280 x 800 WXGA 2000 1 3LCD Interactive Projector with RM Easiteach Software
- Projection Technology: 0.55" single chip DLP Resolution: XGA - 1024 x 768 Light Output: 3,000 ANSI lumens Colors: 1.07 billion colors Aspect Ratio:....
- Lens: x 1.1 manual zoom Lamp Wattage: 196W Expected Lamp Life: Approximately 4,500 hours (standard mode), 6,000 hours (Eco mode) Speaker Output: 2W x....
- Computer: VGA, SVGA, XGA, WXGA/WXGA+/SXGA/SXGA+/UXGA H-Sync: 31.5 kHz - 102 kHz V-Sync : 59.9 Hz - 120 HComponent Video: 480i, 480p, 576i, 576p, 720p,....
- Digital Input HDMI x 1 (HDCP compliant Computer Input 1 15-pin mini D-sub x Computer Input 2 15-pin mini D-sub x Computer Monitor Output 15-pin mini....
- Video Input S-Video Mini DIN 4-pin x 1, Composite Video RCA jack x 1, Component Video 15-pin D-sub x 2 (shared with computer in 1/2Audio Input 3.5 mm....
Check StockBlackmagic Design Mini Converter SDI Distribution
- Blackmagic Design CONVMSDIDA Switchable SD, HD and 3G SDI Distribution Amplifier Mini Converter.Ideal for connecting the same signal to several devices at once..
- SDI distribution has an SD, HD and 3Gb/s auto switching input and provides 8 re-clocked outputs..
- It also supports ancillary data and embedded audio.Blackmagic Design Mini Converter Common Features: Auto Switching SD and HD.Mini Converters instantly switch between standard definition and high definition video formats and changeover is automatic when the video input changes..
- A huge range of video standards are supported including, NTSC, PAL, 1080i/59.94, 1080i/50, 1080psf/23.98, 1080psf/24, 720p/59.94 and 720p/50 formats, plus new formats can be added via USB.Redundant SDI Input.Mini Converters feature a unique redundant input for mission critical tasks such as broadcast or live events..
Check StockZalman Zm-Mic1 with 3.5mm Gold Plated Splitter Cable
- High Sensitivity Headphone Mic, 3 Mini Clips for Tidy Arrangement.
- Clip the microphone onto the headphone cable as close to the mouth as possible..
- Use the mini clips on the microphone cable to latch the microphone cable onto the headphone cable..
- Insert the microphone jack into the Mic Input of the soundcard/audio input device..
- Adjust the Mic Input Level in the soundcard`s software/audio input device..
Check Stock
YoloLiv YoloBox Mini Ultra-Portable All-in-One Smart Live Streaming Encoder & Monitor
- ...Enhanced CPU opens the door to expanded capabilities of upcoming software features to make it more powerful..
- 【Smaller Size, More Affordable, Work as a Camera Monitor】With a 5.5 inch touchscreen display, YoloBox Mini could solely work as the camera monitor when you are not live-streaming! YoloBox Mini has 1 HDMI input, 1 USB input, plus local SD card for recording, 1 Mic in, 1 Line in, 1 HDMI out, 1 Audio out. The smaller size allows you to do production in the palms of your hands..
- 【Go Live in 1080p60 Instantly, Ideal For IRL/Vlogging/Outdoors】YoloBox Mini is still perfect for Worship, Weddings/Funerals, Sport, Events, Corporate, Education, Retail Business. Now by allowing it streaming output at 1080p60, it expands nicely to IRL Streaming, vloggers, Live gamers, creators and Twitch streamers and other fast-moving outdoor scenarios. Perfect for one-man-band that doesn’t need a production crew!.
- 【Works perfect with Any Video Switchers. Powerful Companion】YoloBox Mini help get rid of the computer, OBS, ATEM Software Control. Whether it’s from USB Input or HDMI Input, YoloBox Mini receives and transmits the signal seamlessly to the destination without needing the computer or extra live broadcasting software! YoloBox Mini itself is the compu....
Check StockACEIRMC 6pcs ESP8266 D1 Mini WiFi Dev Board ESP-12 ESP-12F NodeMcu Mini Module WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino
- This is D1 mini , it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
- D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini.
- 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
- 1 analog input(3.2V max input). Micro USB connection.
- WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
- Our mini development board compatible with Arduino WeMos and can be programmed in the for Arduino IDE..
Check StockACEIRMC ESP8266 ESP-12 ESP-12F NodeMcu Mini D1 Module for WeMos Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino,Compatible with WeMos D1 Mini 5pcs
- This is D1 mini, it is a mini NodeMcu Lua WiFi board based on ESP-8266EX..
- D1 Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, Compatible with WeMos D1 Mini..
- 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
- 1 analog input(3.2V max input). Micro USB....
- WIFI development board,4M bytes.5V 1A switching power supply (switching power supply）onboard..
- Our D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check StockHosyond 5Pcs D1 Mini NodeMcu ESP8266 ESP-12F Wireless WiFi Module Internet of Things Development Board Compatible with Arduino/WeMos
- It is a mini NodeMcu Lua Wireless development board based on ESP-8266..
- Compatible with Arduino IDE and WeMos D1 Mini..
- 4M bytes, 5V 1A switching power supply onboard,1MB flash memory.
- 11 digital input/output pins, all pins with interrupt/PWM/I2C/1-wire support (except D0).
- 1 analog input (3.2V max input). Micro USB connection..
- D1 mini development board compatible with Arduino WeMos and can be programmed in the compatible for Arduino IDE..
Check StockMonster Rockin' Roller Mini | Portable Bluetooth Wireless Speaker, 60 Watts, up to 36 Hours Playtime, Mic/Guitar Input, Water Resistant
- 60 WATTS OF POWER: The Rockin’ Roller Mini has up to 60 watts of power making the perfect portable speaker for indoor or outdoor events!.
- UP TO 36 HOURS OF PLAYTIME: Never worry about battery life! With up to 36 hours of playtime the Rockin’ Roller Mini will last through any event or weekend trips on a single charge!.
- MICROPHONE & GUITAR INPUT: The Rockin’ Roller Mini comes equipped with a 3.5mm microphone/guitar input. Plug the included microphone into the speaker and be heard!.
- EASY TO CONNECT DEVICES: Easily and wirelessly sync any of your mobile devices to the Rockin’ Roller Mini via Bluetooth and NFC! Additional features include: USB input, FM Radio, AUX in, battery indicator, and more!.
- IPX4 WEATHER RESISTANT: The speaker is weather resistant, making it easy to take outside in any environment. Dust, sand, light moisture – no problem!.
Check StockMonster Rockin' Roller Mini | Portable Bluetooth Wireless Speaker, 60 Watts, up to 36 Hours Playtime, Mic/Guitar Input, IPX4 Water Resistant
- 60 WATTS OF POWER: The Rockin’ Roller Mini has up to 60 watts of power making the perfect portable speaker for indoor or outdoor events!.
- UP TO 36 HOURS OF PLAYTIME: Never worry about battery life! With up to 36 hours of playtime the Rockin’ Roller Mini will last through any event or weekend trips on a single charge!.
- MICROPHONE & GUITAR INPUT: The Rockin’ Roller Mini comes equipped with a 3.5mm microphone/guitar input. Plug the included microphone into the speaker and be heard!.
- EASY TO CONNECT DEVICES: Easily and wirelessly sync any of your mobile devices to the Rockin’ Roller Mini via Bluetooth and NFC! Additional features include: USB input, FM Radio, AUX in, battery indicator, and more!.
- IPX4 WEATHER RESISTANT: The speaker is weather resistant, making it easy to take outside in any environment. Dust, sand, light moisture – no problem!.
Check StockSound Blaster X-Fi Go! Pro r2 Creative USB audio interface SB-XFI-GPR2
- Analog Input: 16bit / 44.1kHz / monaural.
- Input terminal: microphone input terminal (3.5mm mini).
- Output terminal: headphone / line output terminal (3.5mm stereo mini / switching at switch on the body).
- Corresponding API: EAX 1.0 / 2.0 / EAX ADVANCED HD / 4.0 / 5.0, Open AL.
Check StockAITRIP D1 Mini WiFi Dev Board,Mini NodeMcu Lua 4M Bytes WLAN WiFi Internet Development Board Base on ESP8266 ESP-12F for Arduino, 100% Compatible with WeMos D1 Mini (Pack of 6)
- （pack of 6 ）This D1 mini module is a mini WIFI board based on ESP-8266EX..
- Our D1 mini development board is 100% compatible with Arduino WeMos and can be programmed in Compatible with Arduino IDE..
- Support OTA on line.Compatible withArduino compatibility. Using Compatible with Arduino IDE for programming..
- This WLAN board contains 11 digital input / output pins, all pins have interrupt / pwm / I2C / 1-wire and a micro-USB connection..
- 11 digital input / output pins, all pins with interrupt / PWM / I2C / support 1 line (except D0).
- 1 analog input(3.2V max input). Micro USB connection.
Check Stock
BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer
- A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna..
- Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +..
- Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable..
- Size: 148.5 x 87mm. XH2.54 connectors, 7x PWM power MOSFET output, On board TF card slot, 2×4 row pin lead out for external SD card module, Type-C USB socket. Based on the good performance of RRF firmware and the on-board 7-axis (7pcs tmc2209 stepper motor driver), the board can be easily configured for a variety of models, such as Vorn series, multi z-axis models, dual x models, etc..
- Package includes: BIG-DIPPER Motherboard x 1, Gray Cable x 1, External Antenn x 1, Heat Sinks x 7. If you have any questions, you can contact us via Amazon. We will help you to solve the proble....
Check StockFFB1212EHE-F00 120 x 120 x 38mm Cooling Fan, 190 CFM, 4000 RPM, 59 dBA, 17.78 air pressure, 3 pin Tach connector, Combo Set of 3 Pieces, Ship from USA !!
- Air Flow: 190 (Mini. 170.92) CFM or 5.38 (Mini. 4.84) Cubic Meter per minute.
- Air Pressure: 17.78 (Mini. 14.30) mmH2O or 0.70 (Mini. 0.563) inchH2O.
- Rated Input Voltage: 12VDC, Operating Input Voltage: 7 – 13.2VDC, Input Current: 2A (Max. 3A).
- 3-pin connector with speed (Tach) sensor – Caution: the 3-pin header must provide a minimum of 3A of power in order to power this fan so please check if your motherboard’s 3-pin header can provide enough power and if the header might overheat. We suggest using a fan controller with enough power, or purchase the same fan in the 4-pin molex + 3-pin connector version so you can power the fan directly from a power supply but without the ability to control the fan speed..
Check Stock
