Reviews Milling Wheels

YXQ 10mm Hole 80mm Diameter Ripple Hand Wheel Black with Revolving Handle for Grinder Machines

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

YXQ 4.9 inch Dia Hand Wheel with Revolving Handle 3 Spoked, 12mm Center Hole Diameter

  • Plastic Material: This lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • Standard Size: These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • Easy Installation: The hand wheel comes with screw hole for easy handle assembly..
  • Mainly Used: These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • Wide Application: These hand wheels are widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Varimixer 20-9 Worm Wheel, 9\ Height, 6\ Width, 5\ Length

  • The Lathe milling hand wheel is made of high quality bakelite, modern-design, strong insulation and durable in use.
  • These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle.
  • The hand wheel comes with screw hole for easy handle assembly.
  • Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism.
  • It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc.
Check Stock

Othmro 1Pcs Hand Wheel 16mm Center Hole Diameter 160mm Handwheel Diameter Black 2 Spoked Lathe Handwheel Round Three Hand Wheel with Revolving Handle for Lathe Milling Machine Grinders

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Aluminum Alloy Mini Handwheel Mechanical Hand Wheel 50mm (50x8mm)

  • Material: The lathe milling hand wheel of the lathe is made of high-quality bakelite, with strong insulation and durability.
  • Easy to install: The hand wheel has a detachable rotating handle, and the hand wheel has screw holes for easy handle installation.
  • Application: Revolving handle hand wheels are widely used in industrial machine tools, such as milling machines, lathes, grinders, etc.
  • Features: New type, convenient movement of the milling handle hand wheel, strong carrying capacity.
  • Unique design: This plastic lathe hand wheel is a rear corrugated hand wheel design, which is convenient to replace one of the broken lathes.
Check Stock

Othmro 1Pcs Round Three Hand Wheel 0.63in Center Hole Diameter 6.3in Handwheel Diameter Black Bakelite 3 Spoked Lathe Handwheel Hand Wheel with Revolving Handle for Milling Machine Lathes Grinders

  • 【Excellent Material】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • 【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • 【Easy to Use】- The hand wheel comes with screw hole for easy handle assembly. Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Mainly Used】- These hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • 【Wide Application】- The control hand wheels is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

YXQ 4.9 inch 2 Spoke Hand Wheel with Folding Revolving Handle Black for Milling Machine, 12mm Center Bore Diameter

  • ▶HIGH-QUALITY MATERIALS: The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • ▶DESIGN STANDARDIZATION: These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • ▶SIMPLE ASSEMBLY: The round handwheel come with revolving handle, hand wheel has threaded hole for easy handle assembly.
  • ▶WIDELY USED: It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
  • ▶APPLICATION: Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
Check Stock

Hand Wheel, Plastic Lathe Hand Wheel, 1 pcs Black Lathe Milling Machine Rear Ripple Hand Wheel with Revolving Handle(10 * 63mm)

  • ◇【High Quality】- The lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use..
  • ◇【Standard Size】- These hand wheels are bored to the standard shaft diameter for their size, and are also tapped for a removable handle..
  • ◇【Easy to Install】- The hand wheel comes with screw hole for easy handle assembly..
  • ◇【User's Guidance】- Hand wheels are ideal for any application where general or precise adjustments need to be made via a turning mechanism..
  • ◇【Widely Application】- It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

TM-2 Gem Jewelry Rock Bench Polishing Grinding Engraving Machine Lathe Polisher Tools Buffer Machine Polisher Grinder

  • The polishing machine is a 350W high-power machine,220V,and the speed can reach 10000r/min,which can improve work efficiency and save your time..
  • Quality or speed with this well-balanced precision polisher works with standard wheels and buff pads up to 4 inches..
  • The Bench Polisher has pre-lubricated ball bearings and a dust-proof motor housing that makes it virtually maintenance-free..
  • The Jewelry Buffer is designed to burnish and polish jewelry metals, stone, glass..
  • Work better for cutting, carving, drilling, grinding, polishing, milling, grind-milling, grinding, brushing, cleaning, derusting, etc.
Check Stock

Othmro 1Pcs Round Three Hand Wheel 0.47in Center Hole Diameter 3.94in Handwheel Diameter Black PP 3 Spoked Lathe Handwheel Hand Wheel with Revolving Handle for Milling Machine Lathes Grinders

  • [Standard Diameter]: These hand wheels are fit in the standard shaft diameter for their size, and are also tapped for a removable handle.
  • [Screw Hole and Easy to Install]: The hand wheel comes with screw hole for easy handle assembly.
  • [Ideal Handle Wheel]: This Hand wheel is ideal for any application where general or precise adjustments need to be made via a turning mechanism.
  • [High Quality]: The Lathe milling hand wheel is made of high quality plastic, modern-design, strong insulation and durable in use.
  • [Widely Used]: It is widely used in industrial machine tools, such as milling machine, lathes, grinders etc..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

ASZLBYM 11pcs RPMT10T3 MOE R5 Indexable Carbide Milling Inserts Blade Milling Cutter with 5/8\/16mm SRDPN1616H10 Indexable Carbide Milling Tool Holder Metal Lathe Cutting Tools

  • PACKAGE INCLUDES : You will receive 1pc SRDPN1616H10 5/8”/16mm shank diameter carbide lathe milling tool holder , 11pcs RPMT10T3 MOE indexable carbide milling inserts cutters and 1pc T15 wrench..
  • Material : The SRDPN1616H10 5/8" lathe milling tool holder material is 40Cr steel, it has the characteristics of durability, sturdiness and stability, and good anti-rust performance. The RPMT10T3 MOE indexable milling inserts cutter material is carbide, and the coating is CVD Al2O3 TICN, It has good toughness, wear resistance and high temperature resistance, the milling insert can be used for milling cast iron, steel parts and stainless steel..
  • Milling tool holder cutter size : Shank Diameter ( length×width ) : 5/8"*5/8"(16mm*16mm).
  • RPMT10T3 MOE carbide milling insert size : Insert Style : RPMT , thickness: 0.156" ≈ 3.97mm , diameter : 0.393≈ 10mm, P=11° degree..
  • Easy to store: the milling tool holder and carbide milling inserts are packed in a plastic container, safe and easy to store, please rest assured to buy!.
Check Stock