Reviews Middle Screw

BETOOLL Swing Set Bracket with All Mounting Hardware Middle Bracket

  • BETOOLL Swing Heavy Duty Steel Bracket: Made of 100% Steel to build the strongest and safest A-frame construction..
  • What You Get: 1 Swing set Middle Bracket,16pcs wood screw and 16pcs washers. BETOOLL 90 degree angle swing middle bracket set comes with all mounting....
  • Easy to install: Firstly put two top beam in both ends of swing middle bracket.
  • Secondly simply slide the 4x4 legs into the brackets with the beam....
  • As for Lumber Size---We recommend using Two kiln-dried 4x6" top beam (with a true measurement of 3-1/2" x 5-1/2") and Two kiln-dried 4x4" (with true....
  • About rust and decay: both inside and outside all painted well to against them and keep good looking..
Check Stock

5\ x 7\ Black Leather Self-Stick Photo Album

  • Material: Faux leather stripe cover, metal corner protectors. PP inner pages and screw binding..
  • Construction: Front and back cover + 50 sheets/100 pages PP inner sheet + 1 PU middle strip + 2 sets of screws assembly..
  • Convenient: It can hold 100 photos of 5*7inch (1 inner sheet can hold 2 photos).
  • PP photo bag is relatively light, the upper opening is more convenient for loading and unloading photos..
  • Screw-Binding Design: You can increase or decrease the number of pages. At the screw position, every 10 inner pages are separated by 1 strip of double grey paper, the whole photo looks flat when filled with photos..
  • Treasured Photos: Family or friend birthdays, weddings, anniversaries, Valentine's Day, Mother's Day, Christmas and many other special occasions to remember and cherish..
Check Stock

Liberty4Pcs Stainless Steel 3-inch Thick Hinges, Door and Window Hinges are Equipped with 24Pcs Stainless Steel Screws

  • Product name: stainless steel thickened 3-inch hinge (made of high-quality 304 stainless steel, with better anti-rust performance and long service life).
  • Easy to install: Install by screw, included here. Color: silver.
  • Opening size: 75x 50 x 1.5mm / 2.95" x 1.97" x 0.06" (length * width * thickness).
  • stainless steel screw size: M4x20 (thread diameter * length) detailed dimensions are shown in the figure.
  • The distance between the two holes in the middle is 38mm/1.49in, which is more conducive to the contact area between the screw and the panel and enhances the tightness.
  • Package content: 4pcs stainless steel 3 inch thick hinge plus 24pcs stainless steel screw（If you have any questions when you receive the product, please contact me, I will definitely give you a satisfactory answer and solution!）.
Check Stock

EuTengHao 60 Pieces Pin Keepers Pin Locks Pin Backs Locking Clasp Locking Pin Keeper Backs Locking Pin Backs (9mmx5.5mm,Silver)

  • Package Includes 60 locking pin keepers and 6 locking tools (allen wrench tool). The color is silver..
  • Suitable for locking pin backs also are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles and so on. You can pin your badge on clothes, bags or jeans..
  • Perfect Size: Size of locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm..
  • These bulk pin backs are made of nickel-plated copper, durable and anti-rust. Smooth surface, sturdy and lock your pins firmly, without worrying they will fall off and provide you replacement to the torn screw or wrench locking mechanism.
  • Keep your objects in place during important moments..
  • How to use: Put the black screw into the middle hole, then use a small wrench to screw half of the black screw to ensure that the fixed, fixed into the brooch or medal needs to be fixed to the other two ends of any small hole, then use a wrench to tighten the black screw gradually, to ensure that the fixed..
Check Stock

EuTengHao 60 Pieces Pin Locks Pin Backs Locking Pin Backs Pin Keepers Locking Clasp, Locking Pin Backs Keepers(9mmx5.5mm,Gold)

  • Package Includes 60 locking pin keepers and 6 locking tools (allen wrench tool). The color is Gold..
  • Suitable for locking pin backs also are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles, and so on. You can pin your badge on clothes, bags or jeans..
  • Perfect Size: Size of locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm..
  • These bulk pin backs are made of nickel-plated copper, durable and anti-rust. Smooth surface, sturdy and lock your pins firmly, without worrying they will fall off and provide you replacement to the torn screw or wrench locking mechanism.
  • Keep your objects in place during important moments..
  • How to use: Put the black screw into the middle hole, then use a small wrench to screw half of the black screw to ensure that the fixed, fixed into the brooch or medal needs to be fixed to the other two ends of any small hole, then use a wrench to tighten the black screw gradually, to ensure that the fixed..
Check Stock

CIGARLOONG Cigar Punch Double Blade Sharp Size Drill Cigar Hole Opener Cutter

  • Carving Process:Carefully Handle Complex Processes,Only for Better Feel.
  • Retro Pattern:Ancient Tradition Pattern,Create Personalized Cigar Drill.
  • Screw Open:Hold the Front and Middle ends with both Hands, Easily Screw Open.
  • Double Drill:Cigar and Drill at 90 Degree Angle,Put the Cigar Cap on the Drill,Satisfy Different Size Openings.
  • CIGARLOONG SERVICE: If You Have Any Quease with Our Product, Do Not Hesitate to Contact us and We will be more than Pleasure to Ensure You Have a Positive Experience while Using Our Product.
Check Stock

Astromania Premium Dovetail Clamp for Telescopes and Cameras

  • With the Astromania dovetail clamp, you can attach your telescope to mount - especially suited for heavy telescopes..
  • Clamps all GP level bars safely and reliable. Especially high load capacity up to approx. 20 kg..
  • Areal clamping with two clamping screws - protects the accessories and provides a very stable connection..
  • Dimensions: 87 mm x 87 mm - approx. 116 mm with screw. 9 bores allow connecting to almost all surfaces..
  • Extremly flexible through 9 countersunk bores: M6 Bores: Four M6 bores at 38 mm distance square, two M6 bores lengthwise. One M6 bore in the middle with two drilled (but not threaded) to accommodate screws up to 6mm in diameter, center-to-center screw hole spacing is from 35 to 63mm..
Check Stock

Loboo Idea Speed Out Screw Extractor Drill Bits Tool Set Broken Damaged Bolt Remover Guide Set Broken Easy Out Fastener Kit (5 Pieces, HSS 4341# Silver)

  • Designed for Screw & Bolt Extracting: Each bit has dual head designs, one is used to drill a hole in the middle of the the damaged screws or bolt with the drill end, the other is used to extracting it. The special design helps you grab and remove the screws precisely and easily in 10 seconds or less..
  • H.S.S 4341 Material: Loboo Idea stripped screw extractor is made of high quality H.S.S 4341 material, has 63-65 HRC hardness which is harder than most of other similar products. Durable and solid, suitable to removes even the most stubborn stripped, damaged, embedded, rusted and painted-over screws and bolts. Best gift for any craftsman..
  • Multi Purpose: 5 different sizes of bits (#0, #1, #2, #3, #4) are included in package of stripped screw remover kit and #0 is a gift provided for extra using. All is for ensuring that the screw extractor kit can meet all of your needs. Great for removing stripped, broken head, rusted, unscrew, free-spinning and deck screws or bolts..
  • Easy to Use: 3 simple steps: 1. Drill out, 2. Flip Bit, 3. Extract. Just no other tools needed but a drill, select a smaller bit than the damage screw, you can easily remove the screw. Note: please make sure to run the drill in reverse during the process..
  • Wide Application: The screw and bolt ....
Check Stock

4 Set Black Anti Theft License Plate Screws Kits, Rust Proof Stainless Steel License Plate Screws Kit for Front and Back License Plates and License Plate Frames or Covers on All Cars

  • ...plate locking of most motorcycle,trucks, SUVs,etc.Before purchasing we recommend that you check the compatibility of your vehicle application against our screw dimensions..
  • [Installation and Disassembly]:License plate anti-theft screw – anti-theft bolt head adopts hexagonal twist buckle design, with thimble in the middle. Ordinary hexagonal wrench cannot be installed or removed, so you need to use the wrench provided by us for installation or removal..
  • [Package include]:License Plate fastener kit include license plate installation Stainless Steel Screw 4pcs, Foam Pad 4 pcs,Screw Washers-4pcs,Screw Covers-4pcs,Nylon Screw Inserts-4pcs,wrenches-2pcs，shockproof pads to prevent the plate from vibrating with the bumper and causing noise..
  • [Quality after sales service]: Rust proof,theft proof,rattle proof,the best choice to protect your license plate,Our main products are car accessories and our target is to provide Eco friendly, comfortable and safe products to all our customers..
Check Stock

Taran Tactical Innovation GSSF-00001 Ultimate Fiber Optic Sights Set for Glock

  • The fiber optic dot has been moved up to the very top of the front sight.
  • Our shiny, stainless steel screw reflects even more light right to the middle of the rod..
  • Front sight is designed to also be compatible with the factory screw in case it is dropped or lost at the time of installation..
  • The front sight is .235″ tall and .115″ wide for perfect point-of-impact with the 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35..
  • The rear is .245″ tall. The tighter .125″ rear notch helps dramatically when shooting small steel and tight shots at a distance with the..
Check Stock

EuTengHao 100 Pieces Pin Locks Pin Backs Locking Pin Backs Pin Keepers Locking Clasp Locking Pin Backs Keepers 9mmx5.5mm,Silver

  • Package Includes 100 locking pin keepers and 10 locking tools (allen wrench tool). The color is silver..
  • Suitable for locking pin backs also are suitable for pins, insignia, name tags, display books, lanyards, bags, vests, hats, badge, collectibles and so....
  • Perfect Size: Size of locking pin keepers are 5.5 mm in diameter, 9 mm in height and the locking tool is 4.5cm..
  • These bulk pin backs are made of nickel-plated copper, durable and anti-rust. Smooth surface, sturdy and lock your pins firmly, without worrying they....
  • How to use: Put the black screw into the middle hole, then use a small wrench to screw half of the black screw to ensure that the fixed, fixed into....
Check Stock

SUBANG 40 Pieces Pin Keepers Pin Locks Pin Backs Locking Clasp Locking Pin Keeper Backs with 4 Wrench All in Storage Case,9mm x 6mm

  • Package includes 40 pieces pin backs with 40 pieces strews, 4 piece of locking tools,enough quantities for your need, all in a small clear storage case packed to avoid locking pin backs losing..
  • Locking pin keepers are 6 mm in diameter,9 mm in height,small screws are 3 mm in length,the locking tool is 4.5cm..
  • Pin keepers are made of nickel-plated copper material,which makes them sturdy,durable,reusable and features smooth surface,doing a good job in locking your pins firmly..
  • Pin keeper backs are suitable for pins,insignia,name tags,display books,lanyards,bags,vests,hats,badge,collectibles,Disney pin Locks and so on.You can pin your badge on anywhere you want..
  • How to use:put the black screw into the middle hole,then use a small wrench to screw half of the black screw to ensure that the fixed,fixed into the brooch or medal needs to be fixed to the other two ends of any small hole,then use a wrench to tighten the black screw gradually,to ensure that the fixed,that could be easy to use..
Check Stock

Fishing Line Spooler Portable Fishing Spooling Station Winder System Fishing Reel Spool Line Winder for Fishing Reels and Bobbin (Black, 26 12cm)

  • Lightweight body design: More convenient to carry. Can be stored in your truck, tackle box and bag..
  • Top screw: Tighten it to stabilize the rotor and loosen it to let the rotor spin..
  • Middle knob: Adjust the middle knob according to the width of your spool to get the proper tension..
  • Bushings: Two small extra bushings for different diameter line spools..
  • Wide application: This line winder can be installed on the fishing rod directly to spool the line. Applicable to all kinds of fishing reels and bobbin types..
Check Stock