Reviews Microphone Arm Desk Mount

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

  • 【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
  • 【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
  • 【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • 【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
  • 【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..
Check Stock

Microphone Stand for Blue Yeti, Snowball, Boom Arm Scissor Mic Stand with Shock Mount, Windscreen and Double layered Pop Filter, Heavy Duty Mic Boom Arm Stand, Broadcasting and Recording.Game

  • 【Blue Yeti Snowball Mic Stand with Metal Shock Mount】: Luling Arts microphone arm with shockmount desgined for Blue Yeti, Yeti Pro ,Blue Snowball or mount most standard 1/4'' to 5/8'' adapter microphones.also comes 3/8'' to 5/8''Screw adapter.the mic arm with shock mount Max Support Weight is 70 oz/2 kg (4.4pound)..
  • 【BLUE Snowball boom arm with shockmount】This Blue yeti boom arm Improved leg from hollow to solid ,no longer break or shake. more Stability Range of motion and stronger. Will not break the legs,the market will break the legs after 6 months of use..
  • 【BLUE SNOWBALL Yeti Mic Stand with Pop filter】:This adjustable blue snowball yeti microphone stand comes double layer Pop Filter,snowball mic foam cover,double reduce the plosive, wind interference, saliva spraying.free angle and height to show your perfect voice let you pick up any times..
  • 【Upgraded table mounting clamp for BLUE】:The microphone boom arm desk mount Designed for heavy duty carry and compared with old versions,all zinc alloy construction desk mount is built with anti-scratch pad and wider mouth up ....
Check Stock

NEEWER Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8\ to 5/8\ Screw and Cable Ties Compatible with Blue Yeti Snowball Yeti X Quadcast, etc. Max Load 3.3lb/1.5kg (White)

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording needs. Simply loosen the adjustment knob and adjust the boom arm. It's also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. Designed so that the springs don't get in the way of tightening the adjustment knob.
  • 【Upgraded Desk Mount Clamp】This upgraded desk clamp has a 40.7 square centimeters contact area that is 8 times larger than that of a traditional microphone stand desk C clamp. Easily attach it to any desk up to 2.75"/7cm in thickness..
  • 3/8" to 5/8" Screw Adapter & Mic Clip】 The 3/8" to 5/8" adapter allows you to mount multiple types of microphones on the boom arm, compatible with Blue Yeti, Blue Yeti Nano, Blue Snowball etc. Please note that it's not compatible with Blue Yeti Nano which has a 1/4" thread mount. The microphone clip mounts a microphone with a diameter of 1.26"/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and keep the boom arm l....
Check Stock

Audio Technica AT2035 Microphone with Knox Gear Pop Filter, Boom Arm and XLR Cable Bundle (4 Items)

  • [Strong Compatibility] :For at2020 and At2035 mic boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with at2020 and At2035 mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This at2020 and At2035 mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with at2020 and At2035 mic,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for at2020 and At2035 Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this at2020 and At2035 zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes at2020 and At2035 Microphone.The set includes 1 x at2020 mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

SUNMON Microphone Wall Mount and Metal Table Mounting Clamp, Universal Microphone Boom Arm Stand Compatible with HyperX QuadCast, Blue Yeti, Blue Snowball, Shure SM58 Microphone

  • Widely Compatible: The adjustable arm comes with a standard 3/8" to 5/8" adapter for different shock mounts and microphones. (Note: The microphone and shock mount are not included.).
  • Double Microphone Mount: The boom arm stand contains two different mic mount, wall mount and table mounting clamp. Satisfy the use of multiple scenarios..
  • Mic arm stand: The stand arm can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
  • Upgraded Clamp: The table mounting clamp cab easily clip to 2.36''/60mm thick deskwith 0.47in/12mm hole for mic arm. The microphone wall mount set can Install on the wall, solve the limitation that your desk cannot be installed. (Drill Bit Hole diameter: 15/64" /5.95 mm）.
  • Package Included: 1x Mic Scissor Arm Stand, 1x Table mounting clamp, 1x Microphone wall mount set, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount), 1x Mic clip. Note: NOT INCLUDED MICROPHONE AND SHOCK MOUNT..
Check Stock

Boseen Microphone Boom Arm Stand for Blue Yeti with Shock Mount Foam Cover, Heavy Duty Boom Scissor Arm Stand for Blue Yeti, Broadcasting and Recording

  • Non-rebound and Safer Design - Compared with the general outside spring microphone boom arm, the spring of this product is built-in, which can effectively reduces the noise and prevent you from being injured by the external spring or rebound arm when adjusting or installing the microphone stand arm..
  • Heavy Duty Construction Mic Stand - This mic boom arm for blue yeti is made of sturdy metal which can hold your blue yeti microphone firmly, effectively reducing noise and vibration. The microphone boom arm rotates 360 degrees and offers a horizontal reach of 27 inches..
  • Excellent Microphone Shock Mount - The shock mount is made of lightweight, high-quality aluminum, compatible with Blue Yeti and Blue Yeti Pro USB microphone, which can isolate your mic from noises and vibration. There is a cotton pad between the shock mount and the bottom of your microphone, which can prevent your microphone from being scratched..
  • Professional Microphone Foam Cover - This microphone pop filter is specially designed for Blue Yeti. It can effectively reduce the recording noise, defend against pops, b/p plosives, windbreaks, hissing, “breath in”, protect mic from spit and reduce rerecords..
  • Upgraded Table Clamp - There is a sponge pad on the clamp, which can effectively pre....
Check Stock

Boom Arm Compatible with Shure Sm7b and Shure Sm58 Mic, Desk Mic Stand for Shure Series Microphone Such As Shure Mv7 Sm57 Se215 and Mv88.

  • Strong Compatibility :NOTE:You need to screw the corresponding nut in the bracket set to the bracket before you can install your Shure microphone on the bracket.Microphone boom arm adapter wide compatibility 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with Shure, but also suitable for Shure series or mount most standard-sized microphones..
  • Easy to use:This Shure boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with Shure series microphone,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for Shure carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1.0kg..
  • Rugged desk mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • Various accessories: The set not includes Sh....
Check Stock

For Blue Yeti Microphone Boom Arm, YUZUHOME Adjustable Suspension Blue Yeti X and Blue Yeti Nano Mic Stand with 3/8\ to 5/8\ And 3/8\ to 1/4\Screw Adapter, Black

  • Strong Compatibility :NOTE:You need to screw the corresponding two nuts in the bracket set to the bracket before you can install your blue microphone on the bracket.Microphone boom arm adapter wide compatibility3/8'' to 1/4'' connector and 3/8'' to 5/8'' Screw adapter are line with industry standards.This stand not only compatible with blue yeti, but also suitable for blue series or mount most standard-sized microphones..
  • Easy to use:This blue yeti boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with blue series microphone,Suitable for voice-over, Video recording, broadcasting, TV stations for you additional convenience..
  • Heavy Duty Steel Structure: Super-strong spring with extra positioning screw, compact microphone arm stand designed for blue yeti carry,sturdy enough to keep mic well placed. Max load: Approx.2.2pound/1.1kg..
  • Rugged desk mount: In comparison to the old versions, this zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • Various accessories: The set not includes blue yeti microphone.The set includes 1 x blueyeti boom arm, 1 x Desk clamp, 1 x Mic clip, 1 x 3/8" to 5/8" and 1 x 3/8" to 1/4"Adapter, 3 x Cable tie.Not....
Check Stock

For Blue Yeti Boom Arm, Mic Desk Stand Compatible with Blue Yeti Nano Microphone, Blue Yeti x Mic Arm Stand Perfect for Podcasts, Gaming, Recording.

  • [Strong Compatibility] :For blue yeti x and blue Yeti Nano mic boom arm adapter wide compatibility 3/8'' to 5/8'' and 3/8'' to 1/4'' Screw adapter are line with industry standards.This stand not only compatible with blue yeti x and blue Yeti Nano mic, but also suitable for mount most standard-sized microphones..
  • [Easy to use]:This blue yeti x and blue Yeti Nano mic Microphone boom arm is simple to set up and demount, you can easily move and carry the microphone stand.Compatible with blue yeti x and blue Yeti Nano mic,Suitable for voice-over, video recording, broadcasting, TV stations for you additional convenience..
  • [Heavy Duty Steel Structure]: Super-strong spring with extra positioning screw, compact microphone arm stand designed for blue yeti x and blue Yeti Nano Microphone carry,sturdy enough to keep mic well placed. Max load: Approx.2pound/1kg..
  • [Rugged desk mount]: In comparison to the old versions, this blue yeti x and blue Yeti Nano zinc alloy desk mount is built with anti-scratch pad and wider mouth up to 2 inch/5cm to fit most desktop to fix the base..
  • [Various accessories]: The set not includes blue yeti x and blue Yeti Nano Microphone.The set includes 1 x blue yeti mic boom arm, 1 x Desk clamp, 1 x 3/8" to 5/8"Adapter, 3 x Cable tie..
Check Stock

Neewer Microphone Arm Stand, Suspension Boom Scissor Mic Arm Stand with 3/8” to 5/8” Screw and Cable Ties Compatible with Blue Yeti, Snowball, Yeti X, Quadcast and Other Mics, Max Load 1.5kg

  • 【Adjustable Microphone Boom Arm】 Conveniently adjust the angle and height of this mic boom arm to suit your vocal recording need—just loosen the adjustment knob and adjust the boom arm. It’s also easy to fold up and carry. Perfect for stage/studio recording, broadcasting, TV stations, and more.
  • 【Stable Arm Support】 With the strong springs and metal positioning screws, the boom arm is compact yet stable enough to support a load of up to 3.3lb/1.5kg. And the springs don’t get in the way of tightening the adjustment knob.
  • 【Desk Mounting Clamp】 The desk clamp has rubber padding to protect the desk surface from scratches and scuffs. Compatible with most desks with a desktop thickness of up to 2”/5.3cm.
  • 【3/8” to 5/8” Screw Adapter & Mic Clip】 The 3/8” to 5/8” adapter allows you to mount a compatible microphone (like Blue Yeti or Blue Snowball) on the boom arm. It’s not compatible with Blue Yeti Nano which has a 1/4” thread mount. The microphone clip mounts a microphone with a shaft diameter of 1.26”/3.2cm to the boom arm.
  • 【Cable Straps & Solid Base】 The five cable straps help organize your microphone cable and make the boom arm look neat. The base connector is solid for durable and reliable holding.
Check Stock

ZealSound Microphone Arm h19 + Microphone Arm h2

  • 【Adjustable Positioning & Flexible】The gooseneck tabletop microphone arm stand comes with two flexible shaft that can be adjusted which provides up to 19 inch of length and easy microphone direction, in the best possible location for sound to your PC gaming, dragon voice dictation, and talk to Cortana. You can easily adjust it to get the best pickup..
  • 【Broad Compatibility】(LOAD BEARING: 2.2lbs/1kg) Length: 19inch.
  • Adjust your microphone 360 degree to the perfect spot with the flexible gooseneck arm stand. Microphone Clip Diameter Max to 35 mm/1.38 inch, which is compatible with many standard handheld mics. The additional 3/8" to 5/8" screw adapter works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphones. (Can’t support Blue Yeti Nano).
  • 【Sturdy and Solid Build】The streaming microphone arm stands is constructed from durable metal and ABS. A sturdy desktop clamp base mounts to table ensures a firm support for long gooseneck. The headset hook is integrated into the desk clamp.The sponge on the base could protect your desk without any scratches..
  • 【Easy to Mount and Portable Design】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffe....
Check Stock

ZealSound Microphone Gooseneck Arm h1 + Microphone Gooseneck Arm h2

  • 【Adjustable Positioning & Flexible】The gooseneck tabletop microphone arm stand comes with two flexible shaft that can be adjusted which provides up to 19 inch of length and easy microphone direction, in the best possible location for sound to your PC gaming, dragon voice dictation, and talk to Cortana. You can easily adjust it to get the best pickup..
  • 【Broad Compatibility】(LOAD BEARING: 2.2lbs/1kg) Length: 19inch.
  • Adjust your microphone 360 degree to the perfect spot with the flexible gooseneck arm stand. Microphone Clip Diameter Max to 35 mm/1.38 inch, which is compatible with many standard handheld mics. The additional 3/8" to 5/8" screw adapter works perfectly with Blue Yeti, Blue Yeti Pro, Snowball and other microphones. (Can’t support Blue Yeti Nano).
  • 【Sturdy and Solid Build】The streaming microphone arm stands is constructed from durable metal and ABS. A sturdy desktop clamp base mounts to table ensures a firm support for long gooseneck. The headset hook is integrated into the desk clamp.The sponge on the base could protect your desk without any scratches..
  • 【Easy to Mount and Portable Design】The super flexible Microphone snake clamp stand is ideal for mounting your microphone anywhere you need it - desk, podium, pulpit, coffe....
Check Stock