Reviews Micron Separator

Kit Fleetguard (FF5613-FS19768) Fuel Filter - Water Separator (WS100 / FF100-2)

  • Kit Fleetguard (FF5613-FS19768) Fuel Filter - Water Separator (WS100 / FF100-2).
  • FF5613 Fuel Filter Primary Applications Fuel Preporator FF803. Efficiency, TWA BY SAE J 198598.7 % (98.7 %) Micron Rating BY SAE J 19855 micron (5 micron)..
  • FS19768 Fuel Water Separator Primary Applications Fuel Preporator WS80. Efficiency TWA BY SAE J 1985100 % (100 %) Micron Rating BY SAE J 1985140 micron (140 micron)..
Check Stock

Racor Gas/Diesel Fuel/Water Separator

  • Fuel Filter / Water Separator for 500FG 500FH Diesel Marine Boat.
  • Package Included: one Fuel water Separator.
  • Maximum Flow Rate: 60 Gph (227 Lph). Filter Rating: 2, 10, And 30 Micron.
  • Port/Connection Size: M14*1.5,the red ring sinks in diesel and floats on water..
  • Additional Detail: 15 Psi (1.03 Bar) Max Pressure.
Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, Compressed AIR Systems, 125 CFM, Good for 20HP, 25HP, 30HP COMPRESSORS (Stand Alone Dryer)

  • NEW 125 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 3 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECT OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER WITH 3 MICRON ELEMENT AND AUTO DRAIN.
  • 125 CFM @ 100 PSI / 1.25" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 AWG / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 200 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 29.25" ) ( WIDTH 13.9" ) (LENGTH/DEPTH 17.6") / 88 LBS.
Check Stock

FS1212 Fleetguard Fuel/Water Separator Spin-On Filter (Pack of 2)

  • FS1212 Fleetguard Fuel/Water Separator Spin-On Filter (Pack of 2).
  • Replaces: Donaldson P558000, Baldwin BF1212.
  • Overall Height 201.17 mm (7.92 in), Largest OD 93.22 mm (3.67 in), Seam OD 93.73 mm (3.69 in), Gasket OD 71.88 mm (2.83 in), Gasket Inside Diameter 62.48 mm (2.46 in), Thread Size1-14 UNS-2B.
  • Standpipe: NO, Emulsified Water Separation 90 % (90 %), Free Water Separation 90 % (90 %), Efficiency, TWA BY SAE J 198596 % (96 %), Micron Rating BY SAE 20 micron (20 micron).
Check Stock

FASS Titanium Series Fuel Filter Package XWS-3002 / PF-3001

  • XWS-3002 – Our New more efficient Extreme Water Separator is rated @ 2 microns absolute. The reason our water separator no longer has a drain is....
  • PF-3001- New Particulate Filter is rated @ 144 microns..
  • The 144 Micron Particulate Filter on the suction side will drastically reduce cavitation.
  • Lower the sound output of the FASS System, and removes larger fuel particulates..
Check Stock

Schulz REFRIGERATED AIR Dryer for AIR Compressor, 115V, Compressed AIR Systems, 175 CFM, Good for 40HP to 50HP COMPRESSORS (Stand Alone Dryer)

  • NEW 175 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER 115V, SINGLE PHASE.
  • PLEASE NOTE:: YOU MUST USE A MINIMUM 3 MICRON FILTER / WATER SEPARATOR BEFORE REFRIGERATED AIR DRYERS.
  • ITS VITAL THAT WATER & OIL ARE REMOVED FROM THE PIPING BEFORE HITTING THE DRYER. PLEASE SELECT OPTION " WITH PRE-FILTER" FOR A COMPLETE KIT THAT INCLUDES THE DRYER, PLUS STAGE 1 WATER SEPARATOR FILTER WITH 3 MICRON ELEMENT AND AUTO DRAIN.
  • 175 CFM @ 100 PSI / 1.5" FEMALE NPT INLET & OUTLET / REFRIGERANT FLUID TYPE: R134a / WIRE SIZE REQUIRED: 10 AWG / DEW POINT: 41 DEGREES FAHRENHEIT AT 100 PSI.
  • 200 PSI MAX INLET / DIMENSIONS IN INCHES: ( HEIGHT 34.25" ) ( WIDTH 21.75" ) (LENGTH/DEPTH 22.75") / 120 LBS.
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 20 CFM GOOD FOR 5HP COMPRESSORS MAX WITH PRE-FILTERS

  • NEW 20-25 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 20 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 50 CFM GOOD FOR 10HP & 15HP COMPRESSORS WITH PRE-FILTERS

  • NEW 50 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR ( COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 50 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock

REGFIL R12T Marine Fuel Filter/Water Separator Diesel Engine Element filter Spin on Racor R12T S3240 120AT 18-7947 35-60494-1 NPT ZG1/4-19 Inch 10 Micron Outboard Automotive Replacement Parts

  • Notice: This a separator for Diesel & Water, It could not be for Petrol & Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Filter Assy.
  • Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. Don't be caught in the water without one of these diesel spin-on filters.
  • Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well, 10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from gasoline.
  • The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance,instruction: 1.Nylon collection bowl down when installed the water separator and filter. 2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need to use two plugs, you must install them to the filter and tighten them. 3.Before installing the filter, you have to remove those plugs, teflon-tape them, and re-install ....
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 75 CFM GOOD FOR 15HP & 20HP COMPRESSORS WITH PRE-FILTERS

  • NEW 75 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED WATER SEPARATOR + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 75 CFM @ 100 PSI / 1" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: WATER SEPARATOR RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN) 11oz METAL BOWL.
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES 99.98% REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH 11oz METAL BOWL AND INTERNAL FLOAT DRAIN (AUTO DRAIN).
Check Stock

iFJF Marine Fuel Water Separator Element of R12T Fuel Filter/Water Separator 120AT NPT ZG1/4-19Fits Diesel Engine Replaces S3240 (Set of 3)

  • Includes:Automotive Replacement Filter Element.Replaces S3240 R12T 120AT,Replaces 18-7987,Replaces RK10222..
  • R12T Replacement filter of Marine Fuel Filter Water Separator NPT,ZG1/4-19.It can be used for diesel..
  • Filters are designed for high performance applications,and with flow rate of 15 GPH on the R12T model,your engine will perform better than ever with clean,water-free fuel..
  • Don't be caught in the water without one of these diesel spin-on filters.Filter micron:10 micron.Thread size:M18*1.5(Connect head),M60*2.5(Connect collection bowl)..
  • Fuel Water Separator Filter fit 3/8 Inch NPT Outboard Motors as well..
Check Stock

KIPA R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Combo Filter For Automotive Racor R12T 10 Micron Marine Diesel Engine 3/8 Inch NPT Outboard Motor Durable Spin-on Housing

  • This spin-on filter design is simple to replace and the reusable clear nylon collection bowl and features a self-venting drain for removing unwanted muck and water.
  • Notice: This a separator for Diesel & Water, It could not be for Petrol & Water separator, R12T Fuel Filter Water Separator 120AT NPT ZG1/4-19 with Fitting Complete Filter Assy.
  • Filter is designed for high performance applications, and with flow rate of 30 GPH on the R12T model, your engine will perform better than ever with clean, water-free fuel. Don't be caught in the water without one of these diesel spin-on filters.
  • Fuel Water Separating Filter fit 3/8 Inch NPT Outboard Motors as well, 10 micron filters are over 90% efficient at removing particles as small as 10 microns. 10 micron filters are recommended to prevent damage to sensitive inboard, sterndrive and outboard fuel injection systems, Designed to trap the smallest particles and emulsified water from gasoline.
  • The filter units are coated with a durable electrostatically applied powder coating for superior corrosion resistance,instruction: 1.Nylon collection bowl down when installed the water separator and filter. 2.This filter has four ports, two inputs and two outputs. We provide two plugs for the extra two ports. If you need ....
Check Stock

SCHULZ REFRIGERATED AIR DRYER FOR AIR COMPRESSOR COMPRESSED AIR SYSTEMS 20-25 CFM GOOD UP TO 5HP COMPRESSORS MAX WITH REGULATOR PRE-FILTER

  • NEW 20-25 CFM SCHULZ NON-CYCLING REFRIGERATED AIR DRYER WITH INDUSTRIAL RATED AIR PRESSURE REGULATOR/WATER SEPARATOR FILTER + OIL REMOVING COALESCING FILTER.
  • THIS IS A COMPLETE KIT OF EVERYTHING YOU NEED FOR MOISTURE AND OIL FREE ULTRA DRY AIR (COMPRESSED AIR PIPING NOT INCLUDED).
  • DRYER: 20 CFM @ 100 PSI / 1/2" FEMALE NPT INLET & OUTLET / DEW POINT: 41 DEGREES / 200 PSI MAX INLET / MAKE SURE YOUR COMPRESSOR OUTPUT IS A MAX OF 175 PSI SO TO NOT DAMAGE THE STAGE 1 & 2 FILTERS.
  • STAGE 1: AIR PRESSURE REGULATOR ADJUSTS 7-175 PSI / WATER SEPARATOR FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 5 MICRON ELEMENT REMOVES 95% OF MOISTURE + INTERNAL FLOAT DRAIN (AUTO DRAIN).
  • STAGE 2: COALESCING FILTER RATED FULL INDUSTRIAL / 175 PSI MAX INPUT / 0.01 MICRON ELEMENT REMOVES ALL REMAINING MOISTURE + OIL FROM COMPRESSED AIR LINES ALSO EQUIPPED WITH METAL BOWL AND AUTO DRAIN.
Check Stock