Reviews Micrometer For Inductance Measurement

LuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture

  • Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
  • Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
  • Micrometer Holder Stand fit for most inside and outside micrometers..
  • Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
  • Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock

Metric Micrometer

  • 【Outside Micrometer Set】0.0001" precision micrometers are available in a variety of sizes:0-1", 1"-2", 2"-3", 3"-4", with 3pcs benchmark rods and....
  • 【Thickened Carbide Head】 The outer micrometer is made of tungsten steel and hard alloy, and surface powder coated baked finish, which is more....
  • 【Ratchet-stop Thimble Design】The ratchet-stop thimble on the micrometer tools spindle provides constant force, prevent screwing too tight, make....
  • 【Multi-purpose】Metric Micrometer are widely used for precise measurement of length, diameter or thickness..
  • 【Strong Warranty】 Ruitool are confident with the quality of our Outside Micrometers Set that we offer a one year manufacturer warranty when....
Check Stock

Fowler 52-095-007-0, Universal Measuring Set

  • Dial Caliper: This measurement tool set includes Fowler 52-008-007-1 dial caliper with 0.001" graduations.
  • Micrometer Gage: Fowler 52-229-201-0 vernier micrometer with 0.0001" graduations and 0-1" measuring range.
  • Flexible Rule: The set also contains a 6" flexible rule with 32nds, 64ths, 10ths, and 100ths graduations.
  • Easy Storage: This measurement kit comes in a shop-hardened case for storage.
Check Stock

Fowler 52-095-007-0, Universal Measuring Set

  • Dial Caliper: This measurement tool set includes Fowler 52-008-007-1 dial caliper with 0.001" graduations.
  • Micrometer Gage: Fowler 52-229-201-0 vernier micrometer with 0.0001" graduations and 0-1" measuring range.
  • Flexible Rule: The set also contains a 6" flexible rule with 32nds, 64ths, 10ths, and 100ths graduations.
  • Easy Storage: This measurement kit comes in a shop-hardened case for storage.
Check Stock

VEVOR Micrometer Set 0-6' Machinist Tool Micrometer Set 0.0001' Accuracy 6 Pcs Precision Machinist Tool Set Micrometer, Laser-Etched Micrometer with Calibration Standards, Wrench

  • [ 6 Pcs Micrometer Set ]: Micrometer set includes 6 micrometers with measuring range: 0-6" (0-1"/1-2"/2-3"/3-4"/4-5"/5-6"),and microfine Graduations is 0.0001",also the accuracy is 0.0001",ensure a precise measurement every time..
  • [ Calibration Standards & Wrench ]: The micrometer set comes with 5 calibration standards and 1 adjustment wrench,which provides you precise adjustment solutions..
  • [ Precision Machinist Tool ]: It works with high accuracy of 0.0001'', Micro-lapped carbide tipped measuring face make more accurate reading,and the laser-etched graduations will never fade..
  • [ Durable Material Micrometer ]: The outside micrometers are made of heat and corrosion resistant cemented carbide and cast Iron, which makes it work perfect in different condition. Satin chrome finish on thimble and sleeve is rustproof and reducing glare..
  • [ Wide Application for Your Needs ]: This outside micrometer set is ideal for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools etc,help you measure the outside dimensions of raw materials, whole workpieces and more of metalworking and other industrial measure needs..
Check Stock

HFBTE LCR Meter Inductance Resistance Capacitance Tester Digital Bridge Meter with Testing Frequency 100Hz 120Hz 1KHz 10KHz 40kHz 100KHz Basic Accuracy 0.3%

  • LC200A portable meter is based on the LC resonant principle, adding high-speed micro-controller precision measurement calculation. The meter has wide measurement range and high precision, it's measuring range is below 1uH and 1pF. Wide measurement range, high accuracy, small size, light weight and portable..
  • LC200A series can be powered by mini USB cable or included Φ5 DC power supply cable. Note: The power supply voltage is 5V. You can also install 4 AA batteries to power the meter. If the meter is not used for 5 minutes when it is battery powered, it will automatically turn off the power..
  • There are five buttons. They are reset button in red, Hi.C, Hi.L, L/C and extended FUNC button in blue. Just press red the button to calibrate. Open circuit calibration in capacitance measuring mode. Short circuit calibration in inductance measuring mode..
  • Capacitance: 0.01pF-100mF. Inductance: 0.001uH-100H. Frequency: 500KHz/500Hz-50KHz. Accuracy 1% of capacitance range 1pF~1uF, 5% of range 1uF~100mF, 1% of inductance range 1uH~1H, 5% of range 1H~100H..
  • Package include: 1 x handheld LC meter, 2 x banana plug to alligator clip test leads, 1 x LCR kelvin alligator clip test lead, 1 x USB cable, 1 x charging cable, 1 x manual..
Check Stock

Standard Gage 00524103 Value Micrometer and Caliper Set (Black Face)

  • Set includes a 0 to 1" external micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements.
  • Micrometer has 0.0001" graduations and precision of 0.00016".
  • Dial calipers have a black-face dial indicator with 0.001" graduation increments and 0.100" travel per revolution.
  • T-bar depth measuring base attaches to the dial calipers to aid measurement of holes and recesses.
Check Stock

ET430B/ET430 Portable Capacitance Tester 2.8inch TFT LCD Screen Multifunction Digital Capacitance Inductance Resistance Tester Support for The SCPI Protocol(ET430)

  • This meter, on the base of LC resonance principle, adds precise measurement of high-speed micro-controller so that it can measure small inductance and small capacitance precisely.
  • It can measure capacitance(1pF-100mF) and inductance(1uH-100H).
  • It has an advantage over small value testing with precision and minimum resolution.
  • Flexible online calibration can always maintain measurement accuracy.
  • The calibrated parameters are completely stored in the FLASH inside of micro-controller, wouldn't lost when power-off.
Check Stock

East Tester Desktop LCR Meter inductance Tester 10~100KHz Continuously Adjustable; 1Hz Step; Support SCPI; (4510, Grey, 3)

  • Lcr meter benchtop Testing frequency 100khz.
  • Capacitance meter capacitor tester Basic accuracy:0.1%.
  • Capacitance clamp meter Interfaces: standard: RS232.
  • Inductance meter tester Support dc resistance (DCR).
  • Inductance meter benchelectrolytic capacitor measurement model,Adjustment of backlight brightness, Chinese and English are optional.
Check Stock

Capacitance Meter Capacitor Tester Capacitance Resistance Meters Ohmmeters Resistor LCR Meter Measures AC/DC Current Capacitance Frequency Diode Test Continuity Test Temperature (UT601)

  • ☛ WIDE APPLICATION---With a broad capacitance measurement range and precise accuracy, the capacitance meter capacitor tester can measure resistance, transistor, diode and continuity buzzer.
  • ☛ LARGE DISPLAYING SCREEN---With large displaying screen, the capacitance meter capacitor tester allows you to read clearly and easily, convenient to read.
  • ☛ RANGE SWITCH---The range switch enables you to choose related resistance, capacitance and inductance to measure, according to your relative data, easy to operate.
  • ☛ SAFE TO OPERATE---Adopting durable insulating cover, the capacitance meter capacitor tester is safe to operate. Accurate and clear test port will simply your process.
  • ☛ LOW BATTERY INDICATION---The capacitance meter capacitor can be used in measuring the circuit designed capacitance of cable, switch and PCB layout. Diode and buzzer continuity measurements, inductance measurement, low battery indication.
Check Stock

Kynup Digital Caliper, Caliper Measuring Tool, Micrometer Caliper with Large LCD Screen, Stainless Steel, IP54 Splash Proof, Easy Switch from Inch Metric Fraction, Large LCD Screen (6 Inch)

  • 【Accurate Measurement】The measurement range of Kynup digital caliper is 0 - 6''/ 0 - 150 mm.
  • accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Prescise and accurate vernier caliper digital. for household or DIY measurement. Please choose stainless steel digital caliper for more accurate measuring..
  • 【Large LCD Screen】High quality digital vernier caliper, the large and easy-to-read LCD display helps you get precise results quickly and easily. even under strong sunlight or in dismal surroundings. Aslo the locking screws ensure that the measuring jaws are securely secured, allowing for more precise measurements..
  • 【Screen Splash Proof & Stainless Steel Material】The dial caliper micrometer is constructed of first-class STAINLESS STEEL, Screen Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface. Note: please do not install the battery backwards..
  • 【3 Units Conversion】 You can switch 3 units with the digital micrometer: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
Check Stock

Digital Caliper, M MOOCK 0-6 inches Calipers Measuring Tool, Electronic Digital Micrometer Vernier Caliper with Stainless Steel Body, Large LCD Screen, Inch Millimeter Fractions Conversion/Green

  • 【Stainless Steel Digital Caliper】: Fine polished stainless steel frame with knurled thumb roller and new processing of depthometer's groove give better looking, smooth sliding, and accurate result..
  • 【Precision and Accurate Measurement】：With an accuracy within ±0.0005inch/0.01mm, this digital caliper has been a great helper for both professionals and home use；The digital micrometer glides smoothly and allows you to set zero and measure at any point of scale； Smooth and brushed stainless thumb roller easily and precision measurement..
  • 【Three Unit Conversion & Four Measurement Mode 】: It is easy to operation of unit conversion,one button quick change between three measuring modes inch/fractions/millimeter.
  • You can measure the internal, external dimensions, diameters, depth and steps with just one measuring tool. [Attention]：If there is a flickering screen, inaccurate reading, etc. that makes the caliper not work properly, please contact customer service and we will actively solve the problem for you..
  • 【Extra Large LCD Display】: Comes with a large easy-to-read LCD screen that shows instant readings with digital numbers, makes it so much more convenient than any vernier caliper or micrometer caliper.
Check Stock

Micrometer Calibration Rod Stainless Steel Calibration Bars Standard Measuring Rod Calibration Blocks Caliper Calibration Rod for Calipers Outside Micrometers Calibrating 100mm

  • High Quality Stainless Steel Material: Micrometer calibration rod is made of high quality stainless steel, high hardness,not easy to deform and durable..
  • Clearly Marked: Stainless steel standard rods have clear length markings so you can quickly select the size you want..
  • Small And Portable: Standard measuring rods are of reasonable size, light weight, and easy to use and carry.It is a necessary tool for measurement..
  • 4 Optional Specifications: Calibration rod is a professional measuring tool, there are 4 different specifications for you to choose from, 25mm, 50mm, 75mm, 100mm,meet your different measurment needs..
  • Main Application: Calibration stick is mainly used for calibrating micrometers.Micrometer calibration rod is more precise length measuring instruments..
Check Stock