Reviews Micrometer Depth Gauge

Mahr Federal EGH-1028 Surface Analyzer Groove Bottom Probe, 10-Micrometer Radius

  • For use with Mahr Pocket Surf series portable surface roughness gauge (sold separately).
  • Groove-bottom probe for gauging recesses with maximum depth of 6.35mm (0.25").
  • 90-degree conical diamond stylus for two-dimensional tracing.
  • 10 micrometer (0.0004") radius stylus for use with rough surfaces.
  • Measures average roughness (Ra), mean depth (Rz), and maximum depth (Rmax) parameters.
Check Stock

Fowler 54-225-456-0, IP54 Digital Depth Micrometer with 0-6\/150mm Measuring Range

  • Depth Gauge: Features an automatic switch off, an LCD display, friction thimble, microlapped 4” base for repeatable and accurate readings, six interchangeable rods for providing rapid measurement of hole depths, and an electronic counter.
  • Precision Measurements: Features a 0-6"/150mm range, a resolution of 0.00005"/0.001mm, and accuracy of 0.00016″/0.004mm.
  • Rod Extensions: Six rods included, all with a diameter of 0.176".
  • Durable Material: Features a base constructed of hardened and ground tool steel to ensure long wear and continuing accuracy.
  • Set Includes: A depth micrometer with an LCD that displays in inch/metric and is water resistant to Ingress Protection 54 (IP54) standards with six extension rods and a fitted case.
Check Stock

Push Button Safety with Pin and Spring, Steel Construction (Stainless-)

  • All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
  • Micrometer allows fine-tuning in either direction.
  • Gradations at increments of .001″ are clearly marked.
  • Eliminates much of the trial and error that was once associated with seating accurate rounds.
  • Bright, white markings make micrometer easy to read.
Check Stock

Standard Gage 00524103 Value Micrometer and Caliper Set (Black Face)

  • Set includes a 0 to 1" external micrometer, 0 to 6" dial calipers, and a depth measuring base for making precision measurements.
  • Micrometer has 0.0001" graduations and precision of 0.00016".
  • Dial calipers have a black-face dial indicator with 0.001" graduation increments and 0.100" travel per revolution.
  • T-bar depth measuring base attaches to the dial calipers to aid measurement of holes and recesses.
Check Stock

Lyman Pro Micrometer Seating Die - 9mm, Stainless Steel

  • Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
  • Has a micrometer adjustable seating head for precision bullet seating length.
  • If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
  • Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
  • Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.
Check Stock

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

  • Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • 0.001" graduation and ± 0.001" accuracy for precise readings.
  • Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
  • 0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
  • friction thimble with ratchet stop applies constant force for repeatability between users.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
  • the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
  • Set Includes: An outside micrometer with a vernier scale of 0.001.
Check Stock

Anytime Tools Micrometer Set and Dial Bore Gauge 0.7\-6\/0.0005\ Deep Engine Hole Cylinder Measurement Gage

  • Bore Gauge: Measures bore to 10" deep, Range 0.7" to 6" diameter. Accuracy: 0.0005" with Crisp Precision Graduations. Includes gage and interchangeable contact points..
  • Bore Gauge: Carbide tip on measuring plunger. Dial indicator contains jeweled bearings, ABS storage case included.
  • Micrometer Set: Includes 6 Premium Quality Micrometers with measuring ranges: 0-1.
Check Stock

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

  • 【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
  • 【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
  • accuracy to ±0.001”/0.02mm and resolution to....
  • 【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
  • 【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
  • 【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....
Check Stock

Mxmoonfree Digital Thickness Gauge 0.001mm/0.00005 | 0-12.7mm/0.5 Electronic Micrometer Thickness Meter with LCD Display Unit Conversion Storage Case Extra Battery

  • [High Resolution] - Measuring range: 0-12.7mm/0.5" | Resolution: 0.001mm/0.00005".
  • The paper thickness gauge is accurate to 1μm which is perfect for....
  • [Inch/Metric Conversion] - One button push conveniently allows the leather thickness gauge to switch measurements between mm and inches, and the unit....
  • [Easy To Operate] - Solid die cast and painted metal grip handle with thumb trigger make the thickness gauge tool easy to operate and hold. Uses a....
  • [With Storage Box] - The sheet metal thickness gauge comes with a well fitted padded hard case for daily storage. The contact plates are finely....
  • [Application] - The digital micrometer caliper is equipped with a large LCD display, which is used to accurately measure the thickness of materials,....
Check Stock

Industrial Tools Dial Bore Gauge Set, 50-160MM Measuring Range Micrometer Cylinder Tool Kit, 0.01 Graduation Interval Measurement

  • All-Metal Device: All-metal clamping device, fastening the meter head, stable and accurate, durable. Insulated grip, comfortable to hold, effective heat insulation, safe and reliable..
  • High Quality Gauge Head: Sealed gauge head, aluminum housing, glass mirror cover, waterproof and dustproof, clear scale, intuitive data, sturdy and wear-resistant..
  • Accurate Measurement: The bore gauge is used to measure the internal dimensions of the workpiece by comparison method. This inside diameter measuring instrument is equipped with good guiding protection bridge, which can be accurately and reliably self-centered..
  • High Accuracy: The measuring range of this micrometer is 50-160 mm. The measuring head has a movable probe at one end and an interchangeable probe at the other end that changes depending on the diameter of the hole being measured. Easy to use, easy to measure, and high accuracy of 0.01..
  • Packing List: 1 x Gauge Rod, 1 x Gauge Head, 5 x Measuring Rod. We sincerely provide you with high quality products, if you have any questions, please contact customer service, we will provide you with satisfactory service..
Check Stock

LuckyHigh Precision Micrometer Holder Stand Cast Iron Base Rubber Lined Jaws Inspection Fixture

  • Micrometer holder base is made of cast iron. The clamp is equipped with rubber pad to avoid damaging the instrument and protect instrument in the process of clamping..
  • Rubber lines jaws are 1.5" wide, will open to 0.75" (18mm)..
  • Micrometer Holder Stand fit for most inside and outside micrometers..
  • Micrometer Holder Stand Jaws can rotate 50 degrees forward and 30 degrees back..
  • Micrometer Holder Stand is mainly used for clamping 0-4" micrometer to provide high measurement stability..
Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

  • STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
  • HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
  • VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
  • CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
  • MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..
Check Stock

Mini Micrometer 10mm Small Micrometer Pocket Size Metric 0-10mm x 0.01mm

  • A MINIATURE Pocket size Micrometer only weighs 1.35oz..
Check Stock