Reviews Microchip Usb Programmer

EZP2019 High Speed USB SPI Programmer with 4 Tested Base Support for Block 24 EEPROM, for 25 Flash 93 EEPROM, etc.

  • 【Portable Programmer】The appearance is small size, easy to carry, and the caliper is normal. Automatic offline copy, support for PC software and firmware updates for programming devices. Utra useful programmer, full support for Block 24 EEPROM, for 25 flash 93 EEPROM, etc.
  • 【High Speed Programmer】USB 2.0 interface, speed up to 12 MBPS. The reading and writing speed is extremely fast, the speed for Lee EN25T80 is less than 3 seconds long and writes EN25T80 in only 9 seconds.
  • 【Automatic Identification】 It is the fastest for BIOS chip programmer on the market.The chip is automatically identified and detected, and the chip supply voltage is automatically selected.
  • 【Wide Application】The high speed USB SPI programmer is suitable for flashing color TVs, DVDs, computer motherboards, hard disk storage chips in the home appliance repair industry.
  • 【After-Sales Guarantee】If you have any quesion about the programmer, please contact us. Our professional and reliable customer service will do our best and provide you with satisfactory solutions within 24 hours.
Check Stock

WESE Pet Microchip Reader, OLED Display Screen Pet Microchip Scanner, Microchip Reader Scanner, Animal Handheld Reader for Animal Management, Resource Management, White

  • USB TRANSFER：Micro chip reader scanner can save up to 128 tag information and you can upload these information to computer via USB cable..
  • OLED DISPLAY SCREEN：Pet microchip scanner with OLED display screen, readable in the sunlight..
  • LOW BATTERY REMINDER：Animal ID handheld scanner is easy operation, rechargeable by USB interface.Alarm when the built-in battery is under low power..
  • READ CHIP：Pet microchip reader support reading FDX-B (ISO11784 / 11785) and EMID microchips..
  • WIDELY USED：Microchip reader scanner widely used for animal management, resource management, railway detection and so on..
Check Stock

AiTrip EEPROM BIOS USB Programmer CH341A + SOIC8 Clip + 1.8V Adapter + SOIC8 Adapter For 24 25 Series Flash

  • Test Clip Pin format: SOIC8 SOP8 matrix ,Programmer TL866 EZP2010 RT809H CH341A.
  • SOIC8 SOP8 Clip DIP8 for in-circuit programming For EEPROM /25CXX/24CXX on ZIP USB.
  • Test Clip Beryllium copper plating needle, without welding, can be directly inserted.
  • USB Programmer CH341A Series Burner Chip 24 EEPROM BIOS Writer 25 SPI Flash AE1185.
Check Stock

Bulipu TL866II Plus USB Minipro Programmer 10 Adapter EEPROM Flash AVR MCU PIC SPI

  • High speed USB Programmer TL866 II Plus Super Pack support ICSP SPI in-circuit programming.
  • Production of high-density SMD technology, a unified user interface, easy to use.
Check Stock

Olideauto Automatic Handicap Door Openers Black Color+Hardwired Stainless Steel Handicap Push Buttons

  • Manually push force can be adjusted on closing force by handheld programmer.
  • Automatically re-open door if it notices an object in the closing path.
  • Easily set all of parameters by hand programmer.
  • Wide voltage technique workable with input voltage AC100V to AC240V.
  • Provide installing video by a USB flash drive, easy to install and debug..
Check Stock

Seeku FX3U-32MT DIY PLC programmable Logic Control Board Support Analog 6AD 2DA,8 Channels 100k high Speed Output

  • Programming performance: the use of USB interface, ICSP download, download speed ,Connect to PC by USB PICkit3 development tools embedded drivers, to achieve high-speed USB communication,Connection to the target board,PICkit3 specifies the ICSP standard interface,Firmware can be upgraded,In the future, Microchip will introduce more PIC models, the new device models will also be added to ICSP device support list!,The upgrade method is automatic upgrade, Microchip will provide the upgrade program.
  • Simulation performance: the use of USB interface for simulation debugging, single-step debugging, breakpoint debugging, fast response!.
  • Simulation function: support full-speed operation, single-step debugging, breakpoint debugging and other debugging methods.
  • Programming function: can be programmed FLASH ROM, EEPROM and so on.
  • Status:Green, lights up when working (standby).Yellow, lights up when busy.Red, lights up when fails..
Check Stock

Crank Handle - 12" - Fits for Starcraft/Flagstaff/Rockwood/Palomino/Dutchmen

  • OP500-KIT Firstech Option Programmer This is the Compustar programming tool designed to allow quick feature/function changes for all Compustar products. This tool is must for any installer or consumer who wants to easily program the features of Compustar systems. It is the only way to adjust features such as POCs (programmable output controls) and Aux output timing/operation characteristics.
  • Specifications Firstech Option Programmer Brand: Firstech SKU: FT-OP500-KIT Unit of Measure: EACH.
  • USB Updates Compatible with ALL Compustar systems Heavy Duty Silicone Protective Case Heavy Duty Hardened Plastic Construction Bright LED Display.
  • The Compustar OP500 is a feature programming tool designed to allow quick feature/function changes for all Compustar products. This tool is a must-have for any installer or consumer who wants to easily program the features of Compustar systems. It is the only way to adjust features such as POCs (programmable output controls) and Aux output timing/operation characteristics..
Check Stock

Mapei Keracaulk U Unsanded Caulk Pearl Gray - 10.5-oz

  • The st-link / v2 programmer is a circuit debugger and for the stm8 and STM32 microcontroller families.
  • The unique Wire Interface Module (Swimming) and JTAG / Serial Debugging (SWD) Interfaces are used to communicate with any STM8 or STM32....
  • STM8 applications use the high-speed USB interface to communicate with St Visual Developing (STVD) or St Visual Program (STVP) software..
  • STM32 applications use the high-speed USB interface to communicate with atollic, IAR , or Keil in integrated development environments..
Check Stock

FEELMEM Computer Science Keychain Programmer Gift Software Engineer Gift Behind You All Your Memories Keychain Coding Jewelry Web Developer Gift

  • ❤Programmer Keychain❤This keychain with design hand engraved - Behind you, all your memories. Before you, all your dreams. Around you, all who love you.Within you, all you need..
  • ❤Programmer Gift❤Are you looking for gifts for programmers? I think this is a very suitable gift, and the lettering on the keychain is very meaningful..
  • ❤Gift For Programmer Web Developer❤This keychain is best gift for Programmer and Web Developer as Computer Science Jewelry Gift, Computer Geeks Gift ,Christmas gift, Easter gift, Thanksgiving gift. Great for any occasion.Computer Science Graduate Gift,Web Developer Gift,Software Engineer Student Gift,Programmer Gift..
  • it will not tarnish or change color. It is also a great choice for those with skin sensitivities. Key chain pendant 1.18 inches diameter..
  • ❤Package❤This Programmer Keychain will come beautifully packaged in a velvet cloth jewelry pouches, and ready for gift giving. Any quality problems, please feel free to contact us..
Check Stock

Spektrum SRXL2 DSMX Serial Micro Receiver, SPM4650

  • Built in AS3X stabilization, which counters the effects of wind, turbulence and torque using a 3-axis MEMS gyro.
  • Exclusive flight control software tuned by expert RC pilots.
  • Features full range telemetry, integrated barometer to provide altitude and vario telemetry data without additional purchase.
  • Features a bind button for easy binding with no plugs necessary.
  • Features a Micro USB connection for easy registration and updating with any micro USB cable using Spektrum's PC Programmer application.
Check Stock

Prg-108 GQ-4X V4 (GQ-4X4) Programmer + ADP-019 PSOP44 Adapter V2

  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
  • The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software..
  • STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments..
Check Stock

Extra Slim Wall Charger 2-Port USB-A Universal Charger with Smart IC Technology - Fast Charging for iPhone, iPad, Smartphones,Tablets and Other USB 2.0 Devices (Foldable)

  • SMART IC TECHNOLOGY – It can recognize any device, and maximize the charging efficiency. It charges your phone twice as fast and saves you time. Full charging time: For iPhone 7 – 95mins, for iPhone 8 – 100mins, for iPhone X – 90mins. (Charge speed 3.4A max, up to 2.4A per port)..
  • TRAVEL PORTABLE DESIGN – The width is only a smidgen larger than two USB ends side by side, so it won’t take up a ton of space on a power strip. This folds down super small and slips easily into a small purse pocket, or, for the gents, a back pants pocket..
  • BUILT-IN SAFETY MICROCHIP – Built-in premium circuitry and microchip ensure device safety, protect your devices from over-charging, over-heating and short circuit. And with UL, FCC, and PSE certified..
  • TWO UNIVERSAL USB-A PORTS – It can charge up to two usb-a devices at once. Compatible with iPhone, iPad, Android devices, smart-phones and tablets. (Note: It is not quick charger and cannot support QC2.0 & QC3.0).
  • LIFETIME SUPPORT GUARANTEE – Our friendly and reliable customer service will respond to you within 24 hours. You can purchase with confidence, with our 12 month replacement warranty.
Check Stock

Edge Products CTS3 Evolution Diesel Tuner Monitor 85400-100

  • The Edge Products 85400-100 Evolution CTS3 Tuner (Powerstroke) is the most feature laden programmer available for your 1994-2019 Powerstroke Diesel.....
  • Delivering an unmatched pixel ratio, the high-resolution screen on this programmer offers excellent graphics and unsurpassed visibility. This screen....
  • The Edge Products 85400-100 Evolution CTS3 Tuner (Powerstroke) programs the ECM in your truck through the OBDII port. This programmer stores the....
  • This programmer also functions as a complete gauge package to monitor vital engine and transmission data in real time. This allows you to observe....
  • Features: Wi-Fi Updateable | Read & Delete DTC codes | No Wiring Required For Installation | Customizable Gauges & Backgrounds | Auto-Dimming Full....
Check Stock