Reviews Micro Purge Flow Meter

Turbo Torch 0386-0849 NFM-TT Nitrogen Flow Meter

  • Provides precision gas flow control for nitrogen-purging applications.
  • Use with any nitrogen-purging regulator equipped with a 7/16" - 20 male flare.
  • Controls the flow of nitrogen gas through copper tubing while brazing.
  • Excellent accessory to the Turbo Torch Nitrogen Purge Kit and Nitrogen Purge Regulator.
Check Stock

Horiba 9096001700 Plastic Body PH Electrode

  • Modular design makes it suitable for use with output modules, sensors and remote transmitters.Compact structure, easy to install.Intuitive clear reading, high reliability, measuring accuracy is ±1%.High-definition displays show both instantaneous and cumulative flow.Can be widely used to measure diesel, kerosene, gasoline, etc..
  • This digital turbine flow meter has modular design, high accuracy, compact size and stable performance. Easy to replace and maintain internal components. Suitable for use with output modules, sensors and remote transmitters..
  • Malfunction and solution:The flow meter is not accurate. 1. The method of field calibration is not correct. Calibrate again. 2. The flow rate on the meter is below the lowest. Increase the flow rate. 3. The flow meter is blocked by the dry liquid. Take out the impeller and clean it carefully and make sure the impeller turns freely..
  • 4. The impeller is wrapped by the sealing material. Remove the meter and make sure the impeller turns freely. 5. Too close to the impeller. Install properly 6. Too close to the motor or electronic noise environment.
  • The meter can not calibrate. 1. Circuit board is break down. Replace the circuit board. 2. Button is fail to press. Replace the circuit board..
Check Stock

ZuwaUSA Drill Powered Pump ¾” 8 GPM - Marine Grade Aluminum | Unistar-2001A (Drill not included)

  • CONNECTION: 3/4” NPT | Dry self-priming to 13 Ft. | Max temperature 200°F | Working pressure of 58 PSI | The 3/8” shank fits all common chucks for most drills.
  • FLUID VISCOSITY: 1 (water) to 20,000 cP (heavy gear oil) | Transports a wide range of liquids, including liquids containing solids, oils, and corrosives.
  • DRILL POWERED: ZUWAUSA heavy-duty drill powered pump is designed to work with rechargeable/electrical drills with a maximum speed of 3,000 RPM.
  • FLUID TRANSFERS: water, seawater, wastewater, diesel fuel, biodiesel, vegetable oils, gear, motor and heating oil, detergents, antifreeze, chemicals, cooling lubricants..
  • EXAMPLE APPLICATIONS: diesel / home heating oil, remote sludge transfer, gear box oil changes, domestic water supply, flooded basements, barrel emptying/filling, draining waste oil, sewerage disposal, fueling vehicles, car wash, draining aquariums, disposal of cooling lubricants, bilge pump, booster pump..
  • OTHER TERMS FOR THIS PRODUCT: Coolant purge pump, Water purge pump, Oil purge pump, Fluid purge pump, Drill pump, portable water pump, portable oil pump, portable coolant pump, Heating oil transfer pump.
Check Stock

Cressi Octopus Compact Pro

  • Octopus made in ultra simplified single-hull in ABS + elastomer of really compact size (2.36 in | 6 cm in diameter), extremely light (5.15 oz | 145 g). Its mechanism and development are planned to obtain the minimum number of components and great strength..
  • It's a smart shopping option because of its combination of features - reliability - price - maintenance cost. It's suitable for maximum reliability uses and also as a travel regulator due to its lightness..
  • The specific calibration of the inhalation mechanism changes slightly the personality on air output, rewarding an abundant flow without the need to exploit Venturi effect, beyond the exquisite touch and sensitivity of these kinds of regulators..
  • Exhalation effort reduced without the need to minimize the diaphragm thickness. The restraint system design of the diaphragm guides the flow 100% channelled towards the nozzles of the exhaust tee, that helps to guide bubbles far from the visual field..
  • Practically integral purge pusher, bigger between 80 and 400% than any other regulator in the market to facilitate purge manoeuvre, especially to inexperienced divers..
Check Stock

Uniweld R1563 NITROGEN REGULATOR 5-175 PSIG

  • Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
  • Bright orange float ball visually confirms the flow of nitrogen gas.
  • Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
  • Protected from over pressure with a reseatable safety blow off that opens at 200 psi.
Check Stock

CGOLDENWALL Turbine Flow Meter Fuel Meter Digital Flowmeter with FNPT Thread, Flow Meter for Water Diesel Kerosene Gasoline, Flow Rate Range 2.5-26GPM (1 inch Flow Meter)

  • FLOW METER: Before use, please calibrate the flow meter with the liquid to be tested. And the flow rate of the liquid should exceed 2.5 gallons per minute, if the flow rate is too slow, the flow meter cannot measure normally. There is no battery included..
  • MULTI-FUNCTION DISPLAY: High-definition LCD display, can read single cumulative flow, instantaneous flow and total cumulative flow. The clear function can clear the value of cumulative flow, to make sure it is always within the measuring range. If your flow meter cannot work, please contact us in time..
  • HIGH-QUALITY MATERIALS: The aluminum alloy housing is sturdy, durable and corrosion-resistant, which have a long service time. The PCB circuit board make the battery have a long service life, and safe in use. Please NOTE: the LCD display is not water proof.
  • INSTALLATION: The flowmeter can be installed in horizontal and vertical directions, but the flow direction of the liquid needs to be consistent with the direction of the arrow on the flowmeter. There is no direction requirements for the installation of the display screen..
  • MEASURABLE LIQUIDS: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids..
Check Stock

CGOLDENWALL Turbine Flow Meter Digital Fuel Flowmeter with FNPT Inlet/Outlet, 1inch Flow Meter for Water Diesel Kerosene Gasoline, 2.5-26GPM /9-100LPM (1 inch)

  • FLOW METER: the 1 inch flow meter can read instantaneous flow rate, single cumulative flow and total cumulative flows. But it has minimum flow rate requirment, if the flow rate of the tested liquid is lower than 2.5 gal/min, the readings will be inaccurate..
  • TECHNICAL PARAMETERS：① diameter of water inlet: 32mm.
  • ③ the flow speed requirenment for tested liquid: 2.5~26 gal/min.
  • ⑥ max temp of tested liquid: 158°F/70°C.
  • MULTIPLE UNITS: the flow meter provide 4 meauring units for option, which are liter, gallon, pint and quart. The unit defaults to gallons, if the unit is not gallons, please refer to the user manual to change the unit to the needed one..
  • NOT WATER PROOF: the flow meter is not water proof, please keep the display from water during use, to avoid chip damage. We upgraded The flowmeter has been upgraded from never-sleep model to auto-sleep model, which automatically dims the screen when no liquid is flowing through it..
  • WIDE APPLICATION: The turbine flow meter can used for measuring the water, gasoline, diesel, kerosene, methanol and other low-corrosive, non-viscosity liquids. If there is any problem, please contact us in time..
Check Stock

Vapor Canister Purge Valve - Replaces CX-2409, AU5Z9C915B, AU5Z-9C915-B, 911-222 - Compatible with Ford, Mazda, Lincoln, Mercury - Edge, Explorer, Escape, F150, Focus, Fusion, Mustang, Taurus, MKX

  • Replacement Evaporative Emissions Canister Purge Valve - A critical component of the EVAP system, the canister purge valve regulates the flow of fuel vapours being released for the engine to burn instead of the vapours just being released into the atmosphere. When your canister purge valve is bad it may trigger a CEL (Check Engine Light) with a code..
  • Compatible Replacement for Ford, Mazda, Lincoln & Mercury Vehicles - 2011-2018 Edge 3.5L | 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Escape 2.5L | 2011-2019 Explorer 3.5L | 2011-2017 F-150 5.0L | 2015-2017 F-150 3.5L | 2013-2019 F-250 Super Duty 6.2L | 2013-2019 F-350 Super Duty 6.2L | 2010-2019 Fusion 2.5L | 2013-2019 Flex 3.5L | 2011-2017 Mustang 5.0L | 2013-2019 Taurus 3.5L | & more. See below for a full vehicle list..
  • Replaces Part# CX-2409, CP758, CX2383, AU5Z9C915B, 9C915, AU5A-9G866-AB, 9U5Z9C915H, 9U5Z-9C915-H, 911-222, AU5Z9C915A, AU5Z9C915B commonly found on popular 2.0L, 2.5L, 3.0L, 3.5L, 3.7L, 5.0L, 5.2L, 5.4, 5.8L, 6.2L models with year models 09, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19. The canister purge evap valve can easily be located inside the engine bay usuall....
Check Stock

Flow Meter,Aluminum Alloy 1/2 inch Digital LCD Display High Accuracy Fuel Diesel Flowmeter Water Flow Rate Sensor,Control and Measure Low Flow for Gasoline,Kerosene,Engine Oil Blue

  • ✔【DIGITAL LCD DISPLAY】The aluminum alloy flow meter has LCD screen display, which can provide clear reading. Meanwhile, the LCD display flow....
  • ✔【READING AND ACCURACY】There aluminum alloy fuel diesel flow meter has intuitive clear reading and high reliability on digital stainless steel....
  • ✔【WIDE COMPATIBILITY】The high accuracy fuel flow meter is suitable for high viscosity liquid media such as diesel, gasoline, kerosene, engine....
  • ✔【RELIABLE QUALITY】The blue LCD display high accuracy aluminum alloy fuel diesel flow meter is 100% brand new and high quality. Meanwhile, it is....
  • ✔【100% WARRANTY】We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We....
Check Stock

Uniweld NV1 Nitro Vue Flow Indicator with 1/4\ Flare Fittings Single-Gas Flowmeter, Regular, Silver

  • Easy to read flow indicator label and the precision adjustable valve give complete control over the low flow of nitrogen gas.
  • Bright orange float ball visually confirms the flow of nitrogen gas.
  • Purge the copper lines at 20+ SCFH and then reduce the flow to Braze at 3-5 SCFH during the brazing process.
  • Protected from over pressure with a reseatable safety blow off that opens at 200 psi.
Check Stock

Aqua Sphere Sporter Water Shoes, Size 11, Black/Blue

  • Upper: 3 mm nyloprene + 4 flow mesh vents for cooling Air flow.
Check Stock

Forney 85364 MIG Gas Flow Meter and Regulator, MIG/TIG Welders

  • Combination of regulator and flow meter as one single stage piston design unit.
  • Provides accurate regulation of gas flow.
  • Impact resistant machined brass body, polycarbonate flow tube and outer cover.
  • Features regulator and flow meter in one unit.
  • Provides accurate regulation of gas flow designed for MIG and TIG applications.
Check Stock

TUSA Sport Adult Serene Mask and Snorkel Combo

  • PURE SILICONE - FDA regulation compliant. (Rubber articles intended for repeated use / 21 CFR 177.2600) TUSA Sport use pure silicone for the snorkel mouth-piece and mask skirt..
  • CLEARVU TEMPERED GLASS lenses provide superior clarity, color, transmission of light and safety over standard glass..
  • EZ STRAP and BUCKLE SYSTEM - Allows masks to be quickly and easily adjusted with minimal effort. Allowing for a precise fit and ease of removal when necessary..
  • HIGH FLOW PURGE VALVE - A large diameter purge valve for simple, quick clearing, reducing the amount of water remaining in the mouth-piece..
  • HYPERDRY ELITE - DRY TOP - The latest innovation in dry snorkel technology utilizing an independent high buoyancy float for superior dry performance. This keeps the snorkel completely dry by quickly and efficiently closing the tube opening..
Check Stock