Reviews Metric Thread Taps

Machine Tap 1/2\-13 UNC Thread Pitch 4 Flutes, High Speed Steel Thread Forming Tap, Uncoated (Bright) Finish, Round Shank with Square End, Plug Chamfer, HSS Machine Screw Plug Tap

  • CUT & RENEW THREADS: The ABN | Metric Tap and Dies Set 110-Piece Metal Threading Kit cuts and renews external and internal threads to exact standards.
  • Ideal for professional machinists and DIY weekend warriors alike to rethread existing auto and machinery fasteners, remove screws/bolts, cut raw material.
  • Tap wrench fits the different sizes of taps, thread taps are used to process internal thread, thread die set is for external thread, plug taps suitable for cleaning and rethreading.
  • FITS YOUR APPLICATION: Metric – Taper taps (2x0.4, 3x0.5, 4x0.7, 5x0.8, 6x7.5, 6x1, 7x0.75, 7x1, 8x0.75, 8x1, 8x1.25, 9x0.75, 9x1, 9x1.25, 10x0.75, 10x1, 10x1.25, 10x1.5, 11x0.75, 11x1, 11x1.25, 11x1.5, 12x0.75, 12x1, 12x1.25, 12x1.5, 12x1.75, 14x1, 14x1.25, 14x1.5, 14x2, 16x1, 16x1.5, 16x2, 18x1.5,).
  • Tap wrenches (M3-M12 x 1/16”-1/2”, M6-M20 x 1/4”-3/4”).
  • Die wrenches (25mm x 1”, 38mm x 1-1/2” OD).
  • BUILT TO LAST: Constructed from chromium-coated high carbon steel for maximum strength and corrosion resistance.
  • Metric tap set has 3-4 flute abrasive cutting edges each so you can easily clean/repair and cut materials such as aluminum, iron, cast iron, alloy steel, carb....
Check Stock

6mm x 0.75 Metric Taper and Plug Tap Right Hand Thread M6 x 0.75mm Pitch

  • ... a total of two taps to facilitate the alignment of the tap and the tapping hole to ensure that the tap and the hole are perpendicular to each other and tapping smoothly. It also has a smoothing effect on the thread (removes burrs). Suitable for thick steel, rubber, aluminum, copper, and wood..
  • Good Helper: Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading. Can make new threads or re‑thread damaged or jammed threads.Number Of Threads: 3. Thread Tolerance Grade: 0.014. Through Hole/Blind Hole: Through Hole. Material: High speed steel. Tap Style: Straight groove. Thread Code: Standard thread..
  • Suitable for: Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc. Appropriate addition of coolant (e.g. water) can extend the service life when tapping..
  • Replacement for: The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing. Mainly used for hand use, tapping the vast majority of materials in through holed conditions..
Check Stock

Ctooltool Universal 42Pcs Thread Chaser Set, Rethread Repair Tool, Fractional and Metric Thread Restorer Kit

  • Contains 7 SAE coarse and fine dies, 6 coarse and fine taps, 6 metric taps and dies, 1 metric file, and 1 SAE rethread file. Rethread Die Sizes - 1/4. 5/16. 3/8. 7/16. 1/2. 9/16. 5/8 - UNC / UNF.
  • Rethreading tools are color- coded for quick visual identification. 6 x 1.00. 8 x 1.25. 10 x 1.25. 10 x 1.50. 12 x 1.25. 12 x 1.5. 12 x 1.75mm.
  • Highly tempered for strength and durability and are hex shaped for use with a socket or wrench Re-Thread Taps - 1/4. 5/16. 3/8. 7/16. 1/2. 9/16 - UNC / UNF.
  • Sizes for All Metric- USS- SAE. 6 x 1.00. 8 x 1.25. 10 x 1.25. 10 x 1.50. 12 x 1.25. 12 x 1.5. 12 x 1.75mm.
  • Packed in Blow Mold Case. Thread File - 11. 12. 13. 14. 15. 16. 18. 20 and 24.
  • Thread File - 9. 10. 12. 16. 20. 27. 28 and 32.
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M6 Thread 1mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M6 x 1 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M4 Thread 0.7mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M4 x 0.7 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M2 Thread 0.4mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M2 x 0.4 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

uxcell 5 Pairs Metric Hand Threading Tap Set M1.4 Thread 0.3mm Pitch Taper & Plug Milling Taps Straight Flutes High Speed Steel

  • Metric Taps: M1.4 x 0.3 metric taps set. Taper style: starts the thread square with the workpiece. Plug style: generally used in through holes..
  • Applications: The hand threading tap kit is used to re-thread damaged or jammed threads. Suitable for threading mild steels, aluminum, iron, copper, hard plastic..
  • Easy to Use: Hand tapping, mainly used with tap wrenches. Standard thread milling taps are used to thread through holes or shallow and blind holes..
  • Features: Straight flute design, downward chip removal. High speed steel tool is high hardness, high strength, good toughness, and wear resistance..
  • Tips: Add appropriate tapping oil for higher quality internal threads and more durable taps. Without any additional coatings, good for general purpose applications..
Check Stock

Hegebeck Thread Milling 3/8-16 Thread Taps Extrusion Taps H2 Thread Drill Thread Milling Plug for Manual Equipment Special Processing Consoles 1 Pcs

  • Thread Size: M4 x 0.7mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Ti-coated taps provide capability, durability and long service life. Fits a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The mini metric taps are mainly used for clocks, watches, low hardness wood and soft metal hole processing..
Check Stock

Hanson 12008 1\ Rd Hex Plain Die Stock for Tap Die Extraction

  • CUT AND RENEW THREADS: The ABN Metric and SAE Standard Tap and Die 60-Piece Rethread Set Rethreading Kit for Cutting External and Internal Threads is a comprehensive set for cutting and renewing external and internal threads to exact standards.
  • SIZES: Metric taps 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC taps 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF taps 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • Metric dies 3x0.5, 4x0.7, 5x0.8, 6x1.0, 7x1.0, 8x1.25, 9x1.25, 10x1.0, 10x1.5, 12x1.75.
  • UNC dies 4-40, 6-32, 8-32, 10-24, 12-24, 1/4, 5/16, 3/8, 7/16, 1/2.
  • UNF dies 10-32, 1/4, 5/16, 3/8, 7/16, 1/2.
  • BUILT TO LAST: Constructed from hardened alloy steel for maximum strength and longevity.
  • Can cut materials such as cast iron, steel, aluminum, copper.
  • EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.
  • CONTENTS: Package includes coarse and fine threads numbered taps and dies from #4-40 to #12-24 and fractional taps and dies from 1/4"-28 to 1/2"-20, 1/8"-27 NPT tap and die, metric tap and dies from M3x0.5 to M12x1.75, thread gauge, tap handle, die h....
Check Stock

TOMMARS 49-Piece Thread Chaser Set, UNC UNF & Metric Thread Restorer Tool Master Thread Rethreading Kit

  • Thread chaser set includes: UNC(silver): 5/8”-11, 9/16”-12, 1/2”-13, 7/16”-14, 3/8”-16, 5/16”-18, 1/4”-20.
  • UNF(black): 5/8”-18, 9/16”-18, 1/2”-20, 7/16”-20, 3/8”-24, 5/16”-24, 1/4”-28.
  • Metric(gold): M14*1.5, M12*1.75, M12*1.5, M12*1.25, M11*1.5, M10*1.5, M10*1.25, M10*1.0, M8*1.25, M6*1.0.
  • Special thread repair kit used for chasing worn and damaged threads and cleaning stubborn dirt and corrosion without shaving off metal..
  • A must-have master thread chaser kit for any auto mechanic for chasing threads on rusty fasteners and bolt holes on cylinder heads, engine blocks, and bodies of vehicles..
  • Thread chaser set is made of the highest quality carbon steel materials, with strong strength and maximum durability. The dies and taps pieces are hex shaped to use with a wrench or socket..
  • This master thread chaser set is comes with a storage case to keep everything organized. The taps and dies are color coded for easy identification, which helps you differentiate at a glance between coarse, fine, metric, and SAE chasers and dies..
Check Stock

HORUSDY 60-Piece Master Tap and Die Set | SAE Inch and Metric Sizes | for Coarse and Fine Threads Tools

  • Made of high-quality hardened alloy steel, durable and superior strength. Suitable for cutting steel, copper, aluminum, cast iron and other materials..
  • Suitable for re-threading of fasteners and fastener holes, cutting or updating of internal and external threads. Precision milling of SAE and metric taps and molds are used for cutting raw materials or repairing existing threads, removing screws, etc..
  • All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance..
  • Set includes (20) Metric taps and dies: M3x0.5, M4x0.7, M5x0.8, M6x1.0, M7x1.0, M8x1.25, M9x1.25, M10x1.0, M10x1.5, M12x1.75.
  • (20) SAE Fractional taps and dies for coarse thread (UNC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12- 24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC.
  • (12) SAE Fractional taps and dies for fine thread (UNF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF.
  • Heavy-duty plastic suitcase, easy to transport, safe storage, quick to organize, prevent accessories from falling off..
Check Stock

OMT SAE & Metric Tap and Die Set 80pcs | SAE Thread Types NC NF NPT | Tap Die Set Metric SAE Standard for Cutting External and Internal Threads

  • ALL-IN-ONE TAP & DIE SET: This 80-piece internal and external threading tool kit by Orion Motor Tech includes both coarse and fine taps and dies in the 34 most needed standard and metric sizes, from #4 (14/125") to 1/2 inch and from M3 to M12.
  • USER-FRIENDLY DESIGN: This tap and die set is engineered to tight tolerances to meet professional needs.
  • the tap ends are 1/5 to 2/5 inch long for easy use with the provided standard and metric wrenches.
  • CHROMIUM STEEL: The thread repair set is constructed with GCr15 bearing steel heat treated for durable and corrosion-free performance with satisfying longevity.
  • ADDITIONAL TOOLS: In addition to the 68 taps and dies, this tool set includes protective gloves, both long and T-handle wrenches, 1/8" flathead screwdrivers, and thread pitch gauges to find and carve the exact threading you need through wood, copper, aluminum, iron, steel, and more!.
  • BLOW-MOLDED CASES: Separate sturdy storage cases store and organize the SAE and metric taps and dies, providing easy organization and portability wherever you need them.
Check Stock

uxcell Metric Machine Tap M12X1.25mm H2 HSS Uncoated 4 Straight Flutes Thread Tapping DIY Tool 2pcs

  • Thread Size: M12X1.25mm. High-speed steel taps are with high hardness and toughness for wear resistance, well suited for general purpose applications..
  • Can make new threads or re-thread damaged or jammed threads. Uncoated taps feature just the base substrate without any additional coatings, and fit a wide range of applications..
  • Suitable for most metals, iron plate, copper, zinc, alloy steel, abrasive steel, A3 steel, stainless steel, etc.. Appropriate addition of coolant (e.g., water) can extend the service life when tapping..
  • Standard metric thread design, clear and tidy, provide rapid chip removal for efficient threading..
  • The taper taps can be applied for threading machine and electric drills, use to cut thread inside hole, creating a female surface which functions like a nut..
Check Stock