Reviews Metric Tap And Drill

YDLQWCZ Combination Drill Tap Bit 6-32nc 8-32nc 10-32nc 10-24nc 12-24nc 1/4-20nc Set of 6 Screw Tap Bit 1/4 Inch Hex Shank HSS Spiral Flute Tapping Tool Set Kit Deburr Countersink Bit

  • SAE and Metric Sizes - This drill tap kit includes SAE and metric sizes and is the most commonly used screw tapping. 6pc SAE includes: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC, including 6 metric: M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5..
  • Drill Tap Bits Set - Each tap drill has its corresponding size in the storage box, so you can choose the exact drill bit effortlessly. The 1/4" (6.35mm) hexagonal shank has a tapered end to prevent excessive knocking.The back taper exceeds the tap to prevent over-drilling and thread damage..
  • High Speed Steel 4341 Material - The surface of the titanium alloy combined drill bit is treated with titanium alloy, which effectively improves the cutting performance of the drill bit, is more wear-resistant, and prolongs the service life. Made of high-speed steel 4341, to ensure sharpness, speed, and maintain strength and efficiency..
  • Improve Efficiency - Drilling, tapping, deburring, and countersinking can complete the processing of copper, brass, aluminum, sheet metal, low carbon steel, and plastic at one time, improving work efficiency. Deepening the chip flute helps to remove the chips and debris on the tap, reducing friction and heat, so as to achieve a faster and colder drilling process..
Check Stock

Prolinemax 18 Pc Metric HSS Tap & Drill Set

  • Tap Sizes: M2.5 x 0.45, M3.0 x 0.50, M3.5 x 0.06, M4.0 x 0.70, M5.0 x 0.80, M6.0 x 1.0,M8.0 x 1.25,M10.0 x 1.50,M12 x 1.75.
  • Drill Metric Sizes: 2.05,2.50,2.90,3.30,4.20,5.00,6.70,8.50,10.2mm.
  • Case Overall Dimension: 8''L x 4-3/8''W x 1-1/4''H *Estimate Only*.
Check Stock

H.S.S. Tap & Drill Full Bundle, UNC, UNF and Metric

  • 3 H.S.S. Tap & Drill Full Bundle for almost all cases..
  • 18 Pc H.S.S. Tap and Drill Set, Unf in Metal Box, 0001-0050.
  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • 18 Pc H.S.S. Tap and Drill Set, U.N.C, 0001-0040.
Check Stock

AUTOTOOLHOME Titanium Combination Drill Tap Bit Set 13PCS SAE and Metric Tap Bits Kit for Screw Thread Drilling Tapping Deburring Countersinking

  • ... tap bits are made of high speed steel 4341, which can ensure sharp, fast execution and retain strength and efficiency. The surface is treated with a titanium alloy, which greatly improves the cutting performance of the drill, is more wear-resistant and prolongs the service life..
  • 13pcs drill tap kit include SAE and metric sizes, Suitable for most commonly used screw tapping.SAE Included 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC and 1/4-20NC,Metric included M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5 , Includes storage case and quick change adapter for easy bit switching.
  • Drill, tap, deburr and countersink in one quick and easy action,and complete job on copper, brass, aluminum, sheet metal ,mild steel and plastic.work completely, greatly save processing steps and time costs, and improve work efficiency..
  • Each drill tap bit is engraved with the right size, which is convenient for you to choose the size that suits you. Strong hex shank ensures strong connection to drill.a tapered end to prevent excessive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread..
  • Included convenient swivel storage case,Swivel feature props up tap drill bits and securely holds them in place until ready to use. The storage case fo....
Check Stock

Inch Metric Tap Drill Sizes and Decimal Equivalents Chart Non Slip Mouse PAD

  • Complete full chart of drill sizes with decimal equivalents and millimeters.
  • Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
  • Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
  • Made from Non-Slip Neoprene Rubber & HQ Sponge & Cloth. Perfect for Optical Mouse, Trackball Mouse, Mechanical Mouse..
Check Stock

NEIKO 10059A Combination Drill and Tap Bit Set with Quick Change Adapter 13 Piece SAE 6-32NC to 1/4-20NC and Metric Drill Bit Set M3 to M10 Metric Tap Set

  • 3-IN-1 METRIC DRILL BIT SET: This innovative drill and tap set does three jobs in one, adding speed and efficiency to any job. Each bit piece provides hole drilling, tapping, and countersinking for a quick and complete job..
  • 1/4-INCH HEX SHANK: Each bit features a convenient 1/4-inch hex shank with a tapered end to prevent overtapping and minimize oversized holes. This tap drill-bit set also includes a quick-change adapter for effortless bit changes..
  • VERSATILE COUNTERSINKING DRILL-BIT SET: A must for any drill, this set contains 6 SAE drill bits, 6 metric drill bits, and a quick-change adapter. The bits can drill through a wide variety of materials, including sheet metal, plastic, copper, and more..
  • HIGH-QUALITY DRILL TAP SET: Each piece in this bit kit is made from durable high-speed steel. The steel construction ensures sharp, fast execution with superior performance and minimal wear and tear..
  • CONVENIENT PLASTIC CASE: The rugged molded plastic case is lightweight and durable for easy storage and organization. The swivel feature holds the bits securely in place for fast changes..
Check Stock

Inch Metric Tap Drill Sizes & Decimal Equivalents Magnetic Drill Chart for CNC Shop Garage Toolbox, 5.5' x 8'

  • Complete full chart of drill sizes with decimal equivalents and millimeters.
  • Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
  • Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
  • Waterproof, Strong Magnetic backing, Rounded corners.
Check Stock

Inch Metric Tap Drill Sizes and Decimal Equivalents Magnetic Chart for Garage CNC Shop

  • Complete full chart of drill sizes with decimal equivalents and millimeters + EXCLUSIVE CALCULATIONS OF THE LEAD-IN COUNTERSINK DIAMETER AND ABSOLUTE DEPTH OF THE COUNTERSINK BITS!.
  • Tap drill sizes for Inch Tap Sizes from 0-80 to 2-4 1/2 , UNC and UNF..
  • Tap drill sizes for Metric Tap Sizes from 1.6x0.35 to 39x3..
  • Size: 11” x 8.5”, completely Waterproof, Strong Magnetic backing, Rounded corners.
Check Stock

with M35 H.S.S. Plus 5% Cobalt Metric Drill Set

  • 18 Pc Hss Tap and Drill Set, Metric, 0001-0052.
  • M35 H.S.S. plus 5% Cobalt Metric Drill Set, 135 Deg Split Point, 1 to 10mm by 0.5mm in Plastic Box, 3110-1119.
Check Stock

General Tools 715 Tap and Drill Reference Table

  • DOUBLE SIDED TOOL: This guide features a Tap Drill Depth Chart, decimal conversions from 1/64" to 63/64" and a ruler graduated in 64ths.
  • FRONT SIDE: Front side has a machine screw size tap drill chart for recommended 75% depth thread..
  • BACK SIDE: Features a decimal equivalents table in 64ths from 1/64" to 63/64"..
  • WORKS WITH: National Fine, National Course, American Standard Pipe and metric threads..
  • ESSENTIAL TOOL: Essential tap drill and decimal equivalents reference table for toolmakers, machinists and mechanics..
  • GENERAL TOOLS: We're a recognized leader in designing and developing specialized precision tools dedicated to delivering exceptional customer service. We encourage artisans and DIYers to work smarter, measure better, and repair more productively..
Check Stock

wesleydrill Titanium Combination Tap Drill Bit Set 6 Pcs M3-M10 Screw Tapping Bit Multi-Function Bit Set Fit for Light Metal Aluminum Board Iron etc

  • [Specifications and packaging]: 6 Piece multi-function drill bit set.Include size:M3X0.5,M4X0.7,M5X0.8,M6X1,M8X1.25,M10X1.5..
  • [Fitment]: Tap drill bit set is a convenient hex shank drill tap bits set that can simultaneously complete hole drilling, tapping, deburring and countersinking.Suitable for drilling tapping cutting on light metal aluminum board iron etc..
  • [Material]: Thread drill bit set is made of HSS4341 (high-speed steel) +titanium coating for capability and durability..
  • [Advantage]: Drill tap bits set's 1/4 inch hex shank fits into power tools more easily and securely.When using M3-M6, the most suitable speed of the electric drill is 1200/sec, the M7-M10 is 1000/sec..
  • [Quick Replacement, One-Click Drilling]: Metric tap drill bits fast replacement composite cone uses drill edged principle Drilling and tapping in one, one-step processing, greatly save processing steps and time costs, improve working efficiency..
Check Stock

TOPEC Tap Bit Set, 3-in-1 HSS Titanium Coated Drill Tap Combination for Titanium Coated Drill Tap Combination, 13 PCS SAE/Metric threading tap drill bit set with 1/4 Inch Hex Shank, and Quick-Change Adapter

  • ... can be applied to all wood, copper, iron and part of thin stainless steel is also applicable. The surface is treated with titanium alloy to improve the cutting performance and wear resistance of the drill , and extending the service life..
  • ❤【 HIGH VERSATILITY&CONVENIENCE】The product portfolio includes SAE and metric sizes, can meet your various need. Each tap drill is engraved with its size, you can choose the accurate bit without any difficulty.The convenient 1/4" (6.35mm) hex shank has a tapered end to prevent excesssive knocks. Back taper exceeds the tap to prevent over-drilling and damage to the thread. It also comes with a portable storage case you can carry and keep the drill neat and tidy..
  • ❤【WIDE APPLICATIONS】These tap bits are great tools used to create screw threads, to cut or form the female portion of the mating pair. Hex Shank quick change adapter（with lock function）can fit into most power tools more easily and securely for tapping in most materials. （Please consult before using metals with too much hardness !）.
  • ❤【13PCS SIZES&PREMIUM SERVICE】Can be used to tap various threads. 6PC SAE: 6-32NC, 8-32NC, 10-24NC, 10-32NC, 12-24NC, 1/4-20NC.
  • 6 metric：M3 x 0.5, M4 x 0.7, M5 x 0.8, M6 x 1.0, M8 x 1.25, M10 x 1.5.
Check Stock

Machine Tap 5 PCS HSS Spiral Point Titanium Coated Tap Machine Screw Thread Metric Tap Set M3-M8 M3x 0.5 tap M4 x 0.7 tap M5 x 0.8 tap M6 x 1.0 tap M8 x 1.25 tap

  • ✮ [PREMIUM MATERIAL]- This metric tap set is made of high quality HSS (High Speed Steel) with titanium coating, highly hard, sharp, rustproof, anti-corrosive, durable, ensuring long time use.
  • ✮ [DIMENSION]-5 PCS machine screw thread tap set includes: M3x 0.5 tap, M4 x 0.7 tap, M5 x 0.8 tap, M6 x 1.0 tap, M8 x 1.25 tap.
  • ✮ [FUNCTION]- Nice spiral pointed metric tap set used to create screw threads on wood, plastic, aluminum and more materials and remove chips simultaneously. The machine screw thread tap set have 5 different size spiral pointed taps for processing through-hole threads and deep-hole threads to satisfy your various needs.
  • ✮ [APPLICATION]-Great tap set for auto repair, household projects and machinery where metric threads are specified.
  • ✮ [USAGE]- This machine tap set is suitable for drill presses, tapping machines, CNC and milling machines. The machine tap set can be used with tapping oil to get better quality..
Check Stock