Reviews Metric Plugs

Zaya Body Jewelry 16g-00g Ear Stretching Kit Black Plugs and Tapers 00g 0g 2g 4g 6g 8g 10g 12g 14g Gauges Plus Instructions

  • Kit includes 20 black tapers 00g- 16g and 18 black acrylic plugs 00g-14g..
  • Perfect starter ear stretching kit for starting with normal pierced ears..
  • Includes instructions and tips for stretching your ears..
  • Metric sizes are: 10mm 12mm 8mm 6mm 5mm 4mm 3mm.
  • Plugs are straight, no flare for easy insertion and stretching. Does not include 16g plugs..
Check Stock

OEMTOOLS 25026 High-Energy Ignition Spark Plug Gap Gauge, Gap Measurement Tool, 6 Wire Sizes, Includes Electrode Adjuster, Metric and SAE

  • Wide Range: Our gap gauge ranges from 0.040 inch to 0.080 inch.
  • This broad scope ensures you get the correct calculation.
  • Easy To Read: Both the sizes and units of measurement are clearly stamped so that you never have to wonder what the tool is reading.
  • Adjuster: Spark plug gap gauge features 6 wire sizes along the outside of the gauge.
  • This handy gap measuring tool also includes an electrode adjuster.
  • Compact Design: Spark plug gap tool is less than 7 inches long, helping it get into tight or obstructed spaces.
  • Measures Metric and SAE: This spark plugs gap tool displays both SAE and metric sizes.
  • SAE sizes are stamped on the front and metric sizes are stamped on the back.
Check Stock

ABN Oil Drain Plug 76pc Assortment – SAE & Metric Drain Plugs & Washer Gasket Set Compatible with Jeep GM Ford Toyota

  • SECURE ANYTHING: Use the ABN Oil Drain Plug 76-Piece Assortment – SAE & Metric Drain Plugs & Washer Gasket Set to install and secure replacement drain plugs while performing an oil change job on your GM, Ford, Chrysler, Infiniti, Lexus, Nissan, Saturn, Toyota, Honda, Mazda, Jeep, and other cars, pickup trucks, and SUVs.
  • 17 SAE & METRIC SIZES: (10) 1/2” standard GM/Ford/Chrysler, (5) 1/2" universal oversize #1 #2 #3, (5) 1/2” universal oversize #1 #2 Piggyback, (5) 1/2" standard dog point GM/Chrysler, (5) 12mm x 1.25mm Ford/Infiniti/Lexus/Nissan, (5) 12mm x 1.75 GM, (5) 14mm x 1.5 GM/Ford, (3) 18mm x 1.5 Chrysler/Toyota, (3) 20mm x 1.5 Honda/Chrysler, (3) 12mm x 1.75 Saturn, (3) 14mm Dichromate GM/Chrysler/Honda/Mazda, (3) 14mm x 1.5 dog point Ford, (3) 14mm x 1.25 dog point Chrysler/Jeep, (3) 12mm x 1.75 GM.
  • BUILT TO LAST: Metal construction with various zinc platings and black oxide coatings for maximum strength, longevity, and resistance to rust and corrosion.
  • EASY STORAGE: Transparent 12.5” x 8.25” x 2.4” inch (31.8cm x 21cm x 6.1cm) clear plastic carrying case for easy transportation, safe storage, and quick organization.
  • 17 divided compartments that contain 17 different sizes.
  • PACKAGE CONTENTS: Package includes (7....
Check Stock

Glarks 2 Pack Stainless Steel Feeler Gauge Set, 32 Blades 0.04-0.88 mm Dual Marked Metric and Imperial Gap Measuring Tool and 16 Blades Standard SAE and Metric Gap Width/Thickness Measuring Tool

  • ★【What You Get】: In this feeler gauge set, it include 32 blades dual marked metric and imperial gap measuring tool, 16 blades standard SAE and metric feeler gauge, they are well packed in a plastic box, easy for carry and store..
  • ★【High Quality】: All the feeler gauge are made of high quality steel, heat processed with chrome finish, high strength, good resilience, elegant appearance. Surface polished smooth, applying anti-rust oil to prevent rust..
  • ★【Measuring Range】: 32pcs metric and imperial tool measuring range is 0.0015 Inch (0.04mm) to 0.035 Inch (0.88 mm), 16pcs standard SAE and metric feeler gauge measuring range is 0.0015 Inch 0.005 Inch(0.127) to 0.020 Inch ( 0.508 mm)..
  • ★【Easy to use】: Designed with a hole on each end, use screw for easy adjust and disassemble, from where you press the tooth gauge, you can easily rotate the blades, tools are contains a blade notch for easy blade removal, numbers are stamped clear for read..
  • ★【Wide Application】: They measure accurately and have almost no errors, will help you quickly and easily measure gap width/thickness. Suitable for designers, engineers, mechanics to measure the tappet clearances, spark plugs gaps, bearing clearances, piston ring gaps, guitars gaps, engines ....
Check Stock

Thexton 849 Master Brake Bleeder and Plug Kit

  • Thexton’s Master Cylinder Brake Bleeding & plug kit includes long-lasting aluminum adapters for SAE and Metric fittings..
  • Bleeder adapters fit most makes and models to remove air from master cylinder..
  • Plugs enable the technician to isolate the Master Cylinder from other brake components..
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

Actron CP7827 Compression Tester Kit

  • Actron’s Compression Tester Kit detects worn piston rings, burnt valves, and blown head gaskets.
  • Convenient push-button side release valve allows repeated testing without the need to disconnect between tests.
  • Gauge features a 2-1/2 inch diameter, easy-to-read face with standard and metric scales: 0-300 PSI and 0-2100 kPa.
  • 17 inch, high-pressure, flexible, oil and grease resistant hose features a quick release connection at the gauge for faster, easier use.
  • 14mm and 18mm ends fit most thread sizes while included 14mm long reach adapter is perfect for many late model vehicles wth deeply recessed spark plugs.
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

APOLLO TOOLS 95 Piece Mechanics Tool Set with SAE and Metric Socket Sets and Mechanic Tools Needed for Boats Bikes Car Maintenance - DT1241,Gray

  • This 95 Piece Mechanics tool kit contains all the sockets, wrenches and pliers needed for small engine and other mechanical repairs such as replacing spark plugs, stripping wires, cleaning battery terminals etc. The tools are conveniently organized in a sturdy blow-molded case to avoid loss or damages in transport. This well-organized and self-contained with all the tools easy to find at a glance. The case is easy to transport and store..
  • METRIC AND SAE SOCKET SET: Be prepared for garage, workshop and household repairs with this set of the most reached for 1/4" and 3/8" Sockets and a selection of the most popular garage tools..
  • SOCKETS, WRENCHES & MORE: Contains the most popular sized sockets, wrenches and useful hand tools, including pliers, adjustable wrenches, ratcheting bit driver, SAE and metric hex keys, wire brush, wire stripper and more..
  • MOST NEEDED MECHANICS TOOLS: Including sockets, combination wrenches, hex keys, wire stripper, pliers, adjustable wrenches, tire gauge, voltage tester and more..
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

iPstyle Universal Wrench 48 in 1 Socket Wrench Multifunction Wrench Tool with 360 Degree Rotating Head, Spanner Tool for Home and Car Repair

  • 【Socket Wrenches Compact Work With】-- Spline Bolts, 6 Point ,12point,Torx,Square Damaged Blots And Any Size Standard Or Metric, 8mm(5/16''),10mm (3/8"),11mm (7/16"),13mm (1/2''),It Shows On The Wrench With Numeric Etchings To Show The Corresponding Sizes..
  • 【48 Tools In One Socket Tiger Wrench】-- The Unique Revolutionary Tooth Design Allows You To Do Both Standard And Metric Sizes- Simply Flip The Tool Around And You Have More Sizes! No More Lugging Around Heavy Tool Boxes..
  • 【360 Degree Different Size Ratchet Wrench】--You Work At A 45° Angles!I Am Not Sure How Well It Will Hold Up To Everyday Heavy Use, But For Odd Jobs Around The House, It Does Its Job Well..
  • 【Maintenance Professional Tools & Widely Used 】: Thick, Heavy Duty, Professional Tool That?¡¥s Designed To Tackle All Your Projects Around The House, In The Shop, Or On The Job! Anywhere, Anytime! Outdoor, Cycling, Home, Kitchen, Indoor ,Outdoor Vehicle,Work For Car'S Spark Plugs.
  • 【New Handle】-- Of Wrench Ergonomics Handle Design Makes You Comfortable When You ....
Check Stock

HOWOD Pocket Hole Jig Kit, Professional and Upgraded All-Metal Pocket Screw Jig.

  • ...anium-plated stepped drill bits for durability. It’s a solid performer for any project you may have..
  • Easy Adjustment: Simply loosen the thumbscrews to release the marked slider, set the slider to the thickness of material to be drilled, and then re-tighten the thumbscrews. Slider markings are in both imperial and metric measurements for all projects needs..
  • Fast and Easy: No complex measuring or math required making it perfect for novices, hobbyists, and pros alike. This pocket hole jig makes the assembly of any project quick and easy, leaving no visible screw holes. It will take your woodworking projects to a more professional level..
  • Versatile: This pocket hole jig will help you drill perfect pocket holes every time in hardwood, softwood, and sheet (MDF) materials to quickly construct cabinetry, furniture, and other types of joinery with ease. Quick, tool-free adjustment and imperial and metric markings on this jig eliminate the need for extra steps or measuring devices..
  • What You Will Receive: 1 Pocket hole jig, 2-3/8” titanium-plated stepped drill bits, 1 Additional slider, 2 Magnetic square drive bits, 6” and 4” long, pocket hole screws and wooden hole plugs, 2 drill stop collars, 4 Allen wrenches, 1 wrench. We proudly offer professional cu....
Check Stock