Reviews Metric Hose Fitting

DUSICHIN DUS-220 Short Wand High Pressure Washer Gun,3000 PSI Max, 5 Pressure Power Washer Nozzles, 3.0 Tips

  • 3000 PSI high pressure water gun body, brass fitting.
  • 5 pieces of high pressure water nozzles attached with different size.
  • Make sure your pressure washer hose is 14mm diameter inside the M22 metric thread.
Check Stock

Sewer Jetter Kit for Pressure Washer,Sewer Jetter Nozzles Kit,100 FT Drain Cleaning Hose for Pressure Washer,Button Nose and Rotating Sewer Jetting Nozzle,1/4 Inch NPT,Orifice 4.0,4.5,4000-5800 PSI

  • ...e, which can resist oil, weather, ozone and abrasion. It is ISO 9001 Certified. Pin test each crimp to check proper internal crimp..
  • ❤【Button Nose and Rotating Nozzle】Button Nose 4.0 Orifice.1 front jet at 0°that clears blockages.3 rear jets at 33° flush out debris loosened by the front jet.1/4″ Female Fitting – Fits 1/4″ NPT male sewer jet hose fittings.Rotating Sewer Jetter Nozzle 3 backward rotating spray blasts into clogged pipe and moves the nozzle through pipe. The nozzle is easy to slide into drain pipes and sewer lines.The orifice is 4.5.Fits sewer jet hose with 1/4″ male end. 1/4″ Female NPT Fitting..
  • ❤【Quick Connect Plug and Female Metric M22 to 1/4 Inch Female NPT Fitting】Quick Connect Plug used in a lot of situations where high pressure connections are frequently assembled or disassembled.Ideal for quick exchange of pressure washer outlet, sewer jetter hose, guns and nozzles.It makes a solid connection with quick coupler each time.Pressure washer coupler convert metric M22 14mm female NPT thread to 1/4″ Female NPT..
  • ❤【After Sale Guarantee】100% money back guarantee – For whatever reason, you are not satisfied, you can request a replacement or a full refund. Customer satisfacti....
Check Stock

STYDDI 4000 PSI 1/4'(Hose Size) 50 FT Kink Resistant Pressure Washer Hose with M22-14mm Brass Thread and M22 14mm Extension Coupler for All M22-14 Thread Power Washers, Rate Burst 12000 PSI

  • ...ssure washer extension hose consists of four layers of tubes: inner tube, made of water and chemical resistant rubberized thermoplastic.
  • strong tensile steel braided reinforced layer.
  • high tensile cotton braided reinforced layer.
  • wear resistant cover tube. No shake, no leak, and no damaged easily..
  • 100% BRASS THREAD FITTING & LIGHT-WEIGHT THAN RUBBER HOSE - This power washer extension hose is 50 foot long with M22-14mm(not M22-15mm) brass fittings (twist connect). Working pressure up 4400 PSI with weight only 4.52lb, of which is almost half weight than rubber hose, meets your high pressure needs and assist you in doing cleaning work more easily and faster..
  • UNIVERSAL M22-M22 (M22-14mm, not M22-15mm) HOSE-TO-HOSE ADAPTER - Professional M22 metric male thread fitting with inner diameter 14mm could convert metric M22 14mm female thread to M22 14mm male thread. It helps you quickly connect standard power washer gun to hose or just connect for longer hose length. The coupler connectors can stay attached for the instant need to power wash at a moment’s notice!.
  • PREMIUM UPGRADE VERSION MAKES YOUR CLEANING WORK MORE EFFICIENTLY - With new upgraded strengthen and wear resistance feature, the durable extension pressure washer hose provides more longer life time....
Check Stock

M MINGLE Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Male Fitting, 4500 PSI

  • Convert metric M22 15mm male thread to M22 14mm male fitting. M22 15mm is not standard screw fitting and fit electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz..
  • Universal pressure washer coupler connects power washer gun to hose. Fits many brands of pressure washer gun and hose with M22 15mm fitting..
  • Made of high quality brass, resistance to corrosion..
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

uxcell Brass Fitting Connector Metric M6-1 Male to Barb Fit Hose ID 6mm 2pcs

  • One side is used to connect hoses while the other side is used to connect to metric female pipes..
  • This barb fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
  • The barbed stems create a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not included)..
  • Hose barb fitting is commonly used to connect lines for air, water, fuel, oil and inert gases in a quick and simple way..
Check Stock

M MINGLE Pressure Washer Swivel Fitting Metric M22 14mm Thread Stainless Steel 4500 PSI

  • Pressure washer swivel with M22 14mm male and M22 female thread fitting. Eliminates hose twist and no kink..
  • Pressure washer hose swivel could 360 degree rotation. Reduces stress on the gun, hose and operator..
  • Max Working Temperature: up to 120℃, 250°F degree, suitable for hot and cold water. Made of high quality stainless steel. Max Working Pressure:....
  • Convert metric M22 14mm male to M22 female swivel. Connect gun to hose or hose to hose..
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

M MINGLE Pressure Washer Coupler, Metric M22 15mm Male Thread to M22 14mm Female Fitting, 4500 PSI

  • ATTENTION: Convert metric M22 15mm male thread to M22 14mm female fitting. M22 15mm fitting fits electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz..
  • Universal pressure washer coupler connects power washer gun to hose. Fits many brands of pressure washer gun and hose with M22 15mm fitting..
  • If leakage, please put teflon tape on the male threads of your gun or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • AMZ Tool is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

  • ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
  • If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
  • If leakage, please put teflon tape on the male threads of your wand or other products..
  • Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
  • M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..
Check Stock

Twinkle Star 3000 PSI 25 FT High Pressure Washer Hose for Karcher, Generac, Champion&Simpson Others

  • 1/4″ Diameter x 25 ft, 3000 PSI working pressure.
  • Can be used as an extension hose with an adaptor.
  • The washer hose is M22, if your gun / washer washer is the same size, but can not connect well, please connect them hardly..
  • NOTE: IT IS PRESSURE WASHER HOSE, NOT GARDEN HOSE, ONLY SUITABLE FOR PRESSURE WASHER GUN, PRESSURE WASHER. With 12 months product warranty, if you have any questions, please contact us, we would be more than happy to assist..
Check Stock

Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack

  • ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
  • 9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
  • M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
  • 3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
  • Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Check Stock

Tecmolog Brass Pipe Fittings Connector G 1/2 Female Thread (Metric BSP) to US 1/2 NPT Male Thread Pipe Fitting Converter Adapter, SBA037

  • BSP to NPT Adapter: Metric BSP 1/2" (G) female to NPT 1/2" male pipe fitting converter, easily change from standard EU metric to US inches.
  • Brass Pipe Fittings 1/2: This adapter is made of brass for resistance to corrosion, ductility at high temperatures, and low magnetic permeability.
  • Rubber Washers and Teflon Tape for a Perfect Seal: Come with an o-ring for the G1/2 side and the 1/2 " NPT side to produce a leak free connection.
  • Connect Hoses or Fittings of US plumbing: This is used to adapt the plumbing to NPT on bath or kitchen fixture, and European hose fittings.
  • Easy to Install: It has a hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench.
Check Stock

Twinkle Star Pressure Washer Hose Quick Connector, M22 Metric Male Thread Fitting, TWIS375

  • High quality brass for durability and resistance to corrosion.
  • M22 Metric Male thread fitting, ID 14mm diameter.
  • Works with standard power washer hose and guns.
Check Stock

POHIR Pressure Washer Hose 25FT, Kink Resistant Power Washer Hose 1/4 Inch x 25 Feet with M22 14MM Swivel, Lightweight Pressure Washer Extension Hose 25’, 3600 PSI

  • 25 FT Pressure Washer Hose 1/4 - 1/4 Inch x 25 FT pressure washer replacement hose is made of high strength pure material, it’s lightweight, flexible, durable and abrasion resistant. Bend radius of the hose is 4.3 inch..
  • Pressure Washer Hose 3600 PSI - Working pressure up to 3600 PSI and burst pressure to 9000 PSI. Max temperature: 140℉ / 60℃. Compatible with almost all major brands of pressure washers. A great helper for cleaning cars, floors, motorcycles,windows, driveways, roofs and so on..
  • M22 14MM Hose - Metric M22 14mm female thread provides a smooth and firmly no-leak connection. Note: Inner diameter of the fitting is 14mm, NOT 15mm. It would cause leakage if connect to M22-15mm..
  • Kink Resistant Pressure Washer Hose - High-quality material and high-tech craftsmanship bring excellent kink resistance, makes your washing job more flexible and efficient. Warm Tips: Please lay flat to full length before use..
  • Package Include - 1 x 25’ power washer hose, 4 x O rings..
Check Stock