Reviews Metric Bumper Bolts

890pcs M6 M5 M4 M3 Metric Screw Assortment,Metric Bolts and Nuts Kit（with Lock&Flat washers・Wrenches）Socket Head Cap Screws 304 Stainless Steel Hex Head Metric Screws Assortment Set with Case

  • 【Metric Screw Assortment】If you have a set that can handle household screws. Contains 890 pcs metric screws/bolts, nuts and lock&flat washers，4*10mm & 4*20mm self tapping screws. Includes 8mm 12mm 16mm 20mm M3 M4 M5 M6 metric bolts assortment..
  • 【Bolts and nuts kit - High quality】Made of high quality 304 Stainless Steel, This product has passed the international stainless steel inspection.No rust for 50+ years，Passivated Surface，reinforced rust resistance, please feel free to use it in humid and high temperature environments..
  • 【Metric bolt kit - 2-year warranty】Our products have undergone several quality checks and many tests and come with a 2-year warranty! If you need assistance, please contact us by email or Q&A. Money back or exchange. Accept Customization.Satisfaction guaranteed..
  • 【Metric Bolts and Nuts Kit - Wide Application】 Widely used in bicycle, furniture, car license plate, automobile, electrical connections on the power source of household and commercial appliances, and other places of indoor or outdoor..
  • 【Metric screws - Package】1. Screw sorting box Wrop in bubble film.
  • 2. Then wrap into a special screw outer box.
  • 4. Three layers of protection, so that the exquisit....
Check Stock

Neiko 02460A 3/4\ Drive Deep Impact Socket Set, 8 Piece Jumbo Assortment | Metric Sizes (26 to 38 mm) | Chrome Vanadium Steel

  • HEAVY DUTY BUILD: The construction of each 3/4” socket in this 8 piece set consists of extremely strong Chrome Vanadium (Cr-V) steel that will output greater torque, but also has a corrosion resistant black phosphate finish to give your sets longevity and longer lifespan..
  • LARGE SOCKET: This ¾” impact socket set is designed for use with impact wrenches. A set of 8 high-torque, 6-point Metric sockets with ¾ inch drive, each jumbo socket is used to remove tough nuts and bolts on larger vehicles..
  • SPECIAL DEEP DESIGN: Each socket has a unique design that grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts. With a high torque impact gun, each Metric socket will torque the most stubborn fasteners..
  • HIGH VISIBILITY MARKINGS: The easy-to-see high-contrast laser-etched Metric size markings allow easy reading in low light settings and promote efficiency on the job..
  • INCLUDES COMMON METRIC SIZES: Includes eight common Metric socket sizes (26, 27, 29, 30, 32, 35, 36, 38 mm) with blow-mold storage case included..
Check Stock

11 Degree Angled Leg Mounting Plates, Furniture Leg Attachment Plates Industrial Strength T-Plate M8 Sofa Legs with Hanger Bolts,Screws,Set of 4

  • 11 DEGREE ANGLED.Strengthen/ Repair Furniture- No more wobbly legs ! This furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 11 DEGREE ANGLED.Your chair woods need NOT to cut in 11 degree in order to fit the mounting plates..
  • Industrial Standard – Each T-Plate is 2" by 2" (L x W) and 1/4" deep (approx). Plates have 5/16" threaded (metric M8) attachment holes for hanger bolts ,have 4 unthreaded holes(5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • 4 sets pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

M12-1.75 x 30mm Hex Head Bolts Hexagon Screws, Class 12.9 Alloy Steel Black Oxide Finish, Full Thread, 10 PCS

  • WIDE APPLICATION : The hex bolts can be used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. It also good for office appliance, communication equipment, ship assembly and other machinery industry..
Check Stock

14 Degree Angled Leg Mounting Plates Furniture Table Leg Attachment Plates Brackets T-Plate M8 Sofa Legs with Hanger Bolts,Converters, Screws,Full Set of 4

  • ...plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more. NOTE: THEY ARE 14 DEGREE ANGLED.Your chair woods need NOT to cut in 14 degree in order to fit the mounting plates..
  • Specification – Each T-Plate is 1.89" by 1.89" (L x W). Thickness 1.2mm. Plates have 5/16" threaded (metric 8mm/ M8) attachment holes for hanger bolts ,have 4 unthreaded holes(4.5mm)..
  • Easy Installation within Minutes - No need to purchase hanger bolts separately . You have EVERYTHING ready to install furniture legs feet!. Package includes all necessary parts- 4 sets of angled sofa leg mounting plates.
  • 16 pcs of screw adapters for 5mm unthreaded holes.(Metric M8 is Ikea standard)..
  • Convert to U.S. Standard Legs - If your sofa legs are pre-drilled for M10/M8 hanger bolts, these plates allow you to use metric 8mm and convert to U.S. Standard Legs by simply attach these mounting brackets over the hole in the furniture frame..
  • Application- Fit most sofa chair /couches/seats/ottomans/bench/ dresser/ end table and ottoman in market. Full 4 set pack.You have everything ready for the setup.Add them to your shopping cart and save more money!.
Check Stock

53 Piece Rethreading Kit 19 Taps 32 Dies and 2 Thread Files Made in USA

  • Set Contains: 19 taps, 32 dies, of NC, NF and metric sizes and 2 thread files. Please see detailed set content in Product Description section below..
  • Ideal for restoring the stripped threads on old, rusty nuts and bolts.
  • Hex shape makes taps and dies easy to turn with any socket or wrench.
  • Can be used on national coarse, national fine and metric nuts and bolts.
  • Made in USA and Backed by Limited Lifetime Warranty against manufacturing defects.
Check Stock

Swagman 2-Bike RV Bumper Rack

  • Transports 1 to 2 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
  • Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
  • Simple to use and supports various bike sizes, frames and wheels.
Check Stock

Bolt-on RV Bumper Hitch Receiver Adapter Fits 3-4" Beam, 2" Receiver, Trailer Accessories Best for Mounting Bike Racks & Cargo Carriers

  • Upgrade the Patented design : Depending on the different width of the steel beam and the gap of the adapter, these two bolts have the adjustment function, can lock the steel beam, without shaking！ Patented products, please do not imitate !!.
  • VERSATILE DESIGN: The RV Camper bumper hitch 2 in receiver are designed to fits travel trailer 2-3-4-4.5" bumper beam, allowing for a wide variety of towing options. It can accept a ball mount, cargo carrier, bike rack, tow hook and much more. Sturdy carbon steel construction is a durable, corrosion-resistant and long-lasting solution to all your trailer needs..
  • 200LBS TONGUE WEIGHT CAPACITY: The Bumper Hitch has a 200lbs tongue weight capacity that you can rely on (Note: It is NOT intended for towing purposes)..
  • EASY TO INSTALL: Installation of this RV camper trailer hitch is fast and easy. It securely bolts onto virtually any 2"-4.5" RV bumper with the included hardware and typically just a few tools..
  • PACKAGE: Camper RV bumper hitch, 4 bolts included for Mounting hardware..
Check Stock

Swagman RV Approved 4-Bike Bumper Rack

  • Transports 1, 2, 3, or 4 bicycles on an RV or camper trailer bumper (max 30 lb. per bike).
  • Designed for 4" to 4.5" square RV bumpers, installs with a 6.5" and 8" long bolts around the RV bumper.
  • Heavy duty steel construction with a black paint finish and powder-coated to resist corrosion.
  • Secure the steel U-Bolts provided with the rack to your bumper. The upright bar in the center of the rack gives added support to your bikes while....
  • Simple to use and supports various bike sizes, frames and wheels.
Check Stock

4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4

  • Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
  • Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
  • Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..
Check Stock

Genuine Yamaha YFZ450R YFZ450X GYTR Plastic Frame Skid Plate 18PF84N0U000

  • Brand New Engine Splash Shield Bolts Hardware Kit Fender Bumper Clips Rivets direct replacement and perfect fitment.
  • The extruded U-nuts can be used to replace/fix to the bumper.
  • The clips are widely used for radiator yoke trim panel door trim door panel bumper car fender flare side skirt grille wheel well air intake engine....
  • Fits Infiniti G35 G37 FX35 FX45 EX35 Nissan 370Z 350Z (see details).
  • Package includes 10pcs Extruded U-nuts - Replace/Fix to the Bumper(CORROSION RESISTANT) 15pcs Body Bolts with Built-in Fender Washer (CORROSION....
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Red)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
  • 1/4" thick x 8-3/4" Long x 3-3/8 Wide Color: Red.
Check Stock

Stainlesstown Nut Bolt Thread Gauge (Blue)

  • Measures diameter, thread pitch & length of nuts, bolts & screws.
  • Measures fractional bolts from size #4 to 1" up to 7" long.
  • Measures metric bolts & screws from size 3mm to 22mm.
  • Made of very durable 1/4" thick hard plastic.
Check Stock