Reviews Meter Mobile Antenna 3
Super Antenna MC2 SuperPlexer 2 Meter VHF Adapter for MP1 Series HAM Antenna HF Portable Amateur Radio
- THIS IS: The model MC2 SuperPlexer by Super Antenna. The 2 meter band adapter for all Super Antenna MP1 series antennas. Designed as part of the /backpack /base /travel /mobile /portable antenna system for transmitting and receiving on HAM radio frequencies. Deploys in one minute by one person with no tools needed..
- FREQUENCY RANGE: 144 MHz to 148MHz. When utilized with your Super Antenna MP1 series antenna (sold separately), this adapter provides simultaneous HF and 2 meters on the same coax cable. BAND: 2 meters. The MC2 SuperPlexer has no negative effect on HF operation, it can be kept on the antenna continuously..
- COMPATIBILITY: Fully compatible with all Super Antenna MP1 series Antennas and Equipment. Attaches by inserting between the MP1 SuperSlider and the mount. Also may be compatible with other mobile antennas such as manually tuned bug catchers, CB whips, bug sticks, and many other tunable mobile whips that have 3/8"-24 fittings..
- POWER RATING: 500W SSB, 300W CW/DATA. SIZE: 20.0"x1.25"x1.25" (15x32x32cm). COLOR: Stealth Black and Metallic. WEIGHT: 12 ounces (200g)..
- FITTINGS: 3/8-24 standard threads, male fitting on bottom, and male fitting on top of diplexer. CONTENTS OF PACKAGE: 1 MC2 SUPERPLEXER, 1 ER2 EXTENSION ROD, 1 MR2B RADIAL SET, 1 MR2....
Check StockSuper Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane
- THIS IS: The model MR8075 SuperWire Radial Set by Super Antenna. It is designed for use with the MC80 SuperCoil on all Super Antenna MP1 series portable HF antenna systems. Made by Super Antenna for /backpack /base /travel /mobile /portable antenna systems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
- SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
- COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
- SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on c....
Check StockDiamond Original CR8900A Quad Band FM Mobile Antenna
- The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
- Designed specifically for the Yaesu FT-8900R.
- The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
- There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check StockMFJ-1982HP EndFed 1/2 Wave 800W 80M-10M Wire Antenna
- Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
- Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
- Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
- 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
- More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check StockZDTECH High Gain 10-12dBi Omni Directional Outdoor Pole/Wall Mount Antenna With SMA Male/Dual TS9 3G/4G/LTE/5G for Verizon, AT&T, Sprint Mobile Hotpots Router MiFi Mobile Hotspot Router (698-4000 MHz)
- [Antenna Gain]Frequency Range: 698 - 4000MHz.
- Highly enhance your 3G/4G/LTE/5G signal range, improve your mobile broadband reception..
- [Antenna Connector & Cable]Cable Length: 5 meter.
- Adapter Cable: SMA Female to Dual TS9 with 16.5cm RG316 Cable..
- [Wide Compatible] The antenna with SMA Male Original Connector Compatible with 3G/4G/LTE/5G Mobile Router, Mobile Broadband Modem Hotspot, Cellular Gateway,CPE Router.
- Home Office Indoor Cell Phone Signal Booster Repeater, Vehicle Car Truck RV Bus Van Mobile Cellular Amplifier.Also Compatible with(when use Adapter Cable) 3G/4G/LTE/5G Mobile Hotspot, MiFi Router, Cellular Mobile Broadband Modem, Wireless CPE Router, USB Modem Dongle Adapter..
- [Install Note] Please turn off the power of your device;Please keep antenna as vertical as possible;Please install the antenna as high as possible to get a better signal..
- [Help]If you are not sure whether it applies to your device, please contact us for help.You can also ask us questions in Customer questions & answers..
Check StockAstatic 302-01768 PDC7 Compact SWR Meter, Black
- Indicates the Condition of Any 52 Ohm Antenna and Coax.
- Designed to be Used for Base Operations or Mobile Operations.
- Tests for SWR (Standing Wave Ratio), Field Strength and RF Power.
- Note: The number may not return to the default zero unless you disconnect the device from the radio.
- If you need a more robust SWR Meter, check out the Astatic 302-PDC2.
Check Stock1/3 Ct Diamond Solitaire Pendant Necklace in 14k White Or Yellow Gold
- The CR8900A is pretuned to give best bandwidth and VSWR over the FM portions of 10m, 6m, 2m, and 70cm ham bands when mounted on the side of vehicle (i.e. trunk lid) using a K400 or K600 series mount..
- Designed specifically for the Yaesu FT-8900R.
- Heavy Duty Hex-Style Fold-Over, Multi-band, UHF female.
- The Diamond CR8900A quadband is a 10 meter, 6 meter, 2 meter and 440 MHz mobile antenna. It is a 1/4 wave on 10 and 6 meters providing and a 1/2 wave on 2 meters (2.15 dBi gain) and a 2 5/8 wave on 440 MHz (5.5 dBi gain). This antenna can handle up to 60 watts FM..
- There are two center coils and a base coil. The connector type is UHF (for PO mount). The antenna is pretuned to give the best performance over the FM portions of the 10m, 6m, 2m and 70 cm bands when mounted on the side of the vehicle (such as a trunk lip mount). Suggested mounts would include the K400 or K600 series. This antenna is not recommended for a magnet mount or through-the-roof mounts. Includes an Allen wrench for tuning..
Check StockMFJ Enterprises Original MFJ-949E 1.8-30 MHz 300 Watt Deluxe Versa Tuner II Antenna Tuner
- Full 1.8-30MHz Operation Custom designed inductor switch, 1000 volt tuning capacitors, Teflon insulation washers and proper L/C ratio gives you arc-free no worries operation with up to 300 Watts 1.8 to 30 MHz.
- Tunes any Antenna Tunes out SWR on dipoles, verticals, inverted vees, random wires, beams, mobile whips, shortwave receiving antennas.... Nearly anything! Use coax, random wire or balanced lines. Has heavy duty 4:1 balun.
- Custom Inductor Switch The inductor switch is the most likely component to burn up in any antenna tuner. MFJs inductor switch in the MFJ-949E was custom designed to withstand the extremely high RF voltages and currents that are developed in your tuner..
- 8 Position Super Antenna Switch Lets you select two coax fed antennas, random wire/balanced line or built-in dummy load through your MFJ-949E or direct to your transceiver..
- More hams use MFJ-949s than any other antenna tuner in the world! Has MFJs full size 3 inch lighted Cross Needle Meter (not a puny "meter" you cant read). Lets you easily read SWR, true peak forward and average reflected power simultaneously on 300 Watt or 30 Watt ranges. Lamp has on/off switch, requires 12 VDC or 110 VAC with MFJ-1312D (Not included).
Check StockAerial Britain: Oxford and the Rural Surrounds [Region 2]
- ...izon cell phone signal booster home cell signal booster effectively makes phone call signal faster and clearer,boosts voice quality on Volte/HD/4G LTE/5G.No longer need to be near windows or go outside to make phone calls.No more buffer time,Say goodbye to weak signal! att booster 5g cell booster verizon cell phone antenna Supports for multiple users, Compatible for iPhone,Android phone,Hotspot,Tablet PC,Pad...All cellular devices.
- ▶Extend Cell Signal Coverage Up To 5,000 Sq.Ft. -The t mobile at&t cell phone signal booster verizon cell phone extender at&t extender with high gain 65dB, can improve signal strength 32X stronger. After installed properly, boosts spotty signal from 1-2 Bars to strong 4-5 Bars, extend fairly large signal coverage up to 5000 sq.ft. Covers multiple rooms with good signals. Great for using at Home, Office, Metal building, Basement, Garage, Cabin,Village, Camping,Remote area... Any weak signal areas.
- ▶Smart Phone Booster LCD Signal Meter & Advanced Features - High gain 65dB at&t signal booster verizon extender lte 5g cell phone booster for home, with excellent features include good quality, LCD meter, low noise, inactivity mode, auto gain control, eliminate interference, mini, portable,waterproof outdoor antenna.The Included....
Check StockWinegard Flatwave Amped Pro HDTV Indoor Antenna with Bluetooth Signal Meter and Integrated Channel Finder, Up to 60 Mile Range
- The FlatWave Amped Pro is the only antenna with an actual signal meter integrated into the antenna to provide the best possible customer experience when installing. The Flatwave Amped Pro uses a built-in tuner to get real-time signal data.Power Source Type: Corded Electric.
- Captures signals up to 60 miles away, and Winegard’s built-in Clear Circuit Technology boosts reception, cuts dropout, and clears pixelation..
- The ultra low noise (1 dB) digital amplifier is attached directly to the antenna for optimal performance..
- Become a pro at installation with the Winegard Connected mobile app. Pair it with the integrated Bluetooth Technology signal meter and follow the on-screen instructions to discover the ideal antenna placement. Then connect the antenna to the TV, run a channel scan, and watch the maximum number of free HDTV stations available..
Check StockHYS Dual Band NMO Antenna, VHF/UHF Pre Tuned Amateur, W/13ft Low-Loss RG58/U Coaxial Cable with UHF-Male(PL259), Stainless Steel L Bracket, Trunk/Hole Mount for Car
- [High Frequency] The HYS antenna features VHF of 144/430 MHz (136-174MHz and 400-470Mhz) with VSWR:< 1.5, Gain: VHF 2.15/ UHF 3.15 dBi for better TX and RX..
- [Efficient Performance] The antenna exhibits a maximum input power of 150W that works for all 2 meter 70 centimeters mobile radios..
- [Durable] The mount is a “trunk lid” mount with 13 ft low-loss RG58U coaxial cable with UHF-male(PL259) connector installed. This is a high quality, low profile base mount that does the job very well..
- [Easy Installation] The HYS antenna is equipped with 13 ft NMO cable that is connected easily with the antenna and still have plenty cable left to reach the antenna mount practically anywhere on your car or another other vehicle. For a rugged installation, all you require is a small, typically 3/8 inch 3/4 inch, hole to be drilled through the surface that will host the mount..
- [Package Contents] The HYS package includes L-bracket hole stainless steel for trunk groove or side mounting, 3/4″ NMO hole mount with screws and L-bracket HYS TCJ-N1 coax NMO mount cable, mobile antennas perfect for car and truck’s hood..
Check StockTYT Original High Gain Quad-Band 29/50/144/430Mhz Antenna for Mobile Radio TYT TH-9800 Plus+Teflon RG316 16.4ft Coaxial Cable+RB400 Bracket Clip
- This is an original TYT antenna that with TYT logo. This antenna is designed for TYT TH-9800 car radio. Using this antenna on the TYT TH-9800 car radio, it could achieve the best effectiveness of use..
- Four band 29.6 / 50 /144 /435MHz Mobile Antenna for TH-9800 quad band car radio.
- Weight: 0.55kg, Length: about 1. 3 meter when full assemble.
Check StockAuthentic Genuine TYT 10/6/2m/70cm High Gain Quad-Band Mobile Radio Antenna for Tyt TH-9800 Plus Yaesu Ft-8900R Wouxun KG-UV950P Car Radio
- This is an original TYT antenna that with TYT logo. This antenna is designed for TYT TH-9800 car radio. Using this antenna on the TYT TH-9800 car....
- Four band 29.6 / 50 /144 /435MHz Mobile Antenna for TH-9800 quad band car radio.
- Weight: 0.55kg, Length: about 1. 3 meter when full assemble.
Check Stock