Reviews Metalworking Tips

Hymnorq 1/2 Inch Fractional Size M35 Cobalt Steel Twist Drill Bit Set of 2pcs, Jobber Length and Straight Shank, Extremely Heat Resistant, for Drilling in Stainless Steel and Cast Iron

  • COBALT STEEL – Manufactured from M35 grade cobalt steel, with molybdenum and cobalt added to creates a hardened alloy, measuring Rockwell hardness up to 67, for much faster cutting and extra longer life span, ideal for repeated drilling in metalworking..
  • FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • SELF CENTERING – The 135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. The bits will not “walk” or “wander”. Straight shank allows for firmly holding and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC SET – The set includes 2pcs of 1/2” diameter fractional inch size M35 grade cobalt steel twist drill bits. Total lenght: 5.98 inch.
  • working length: 4.49 inch. Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and....
Check Stock

POWERTEC 110680 4 x 36 Inch Sanding Belts | 80 Grit Aluminum Oxide Sanding Belt | Premium Sandpaper – 10 Pack

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts – Ultra Fine Grits – 4 Pack Assortment

  • Kit includes 1 each: P1000, P1200, P1500, and P5000 grit sanding belts (4 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Ultra fine grits are ideal for sharpening, polishing, or ultra fine finishing of any surface | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Hymnorq 15 Piece Metric M35 Cobalt HSS Drill Bit Kit with Straight Shank for Drilling Cast Iron, Brass, Aluminium, Stainless Steel and Other Hard Materials

  • ... 15PC METRIC SET - The set includes 15pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 8 mm, 9 mm, 10 mm. Well organized in a plastic indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Hymnorq 1/8 Inch Fractional Jobber Twist Drill Bit Set of 10pcs, Heat Resistant M35 Cobalt Steel, Fully Ground and Straight Shank, Suitable for Repeated Drilling in Iron and Stainless Steel

  • HSS-CO MATERIAL – Manufactured from M35 grade cobalt steel, 5% cobalt added to creates a hardened alloy, for much faster cutting and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • 135°SPLIT POINT – the 135°quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from “walking and wanding”. Easy cutting without need of center punch..
  • FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • 10PC SET – The set includes 10pcs of 1/8″ diameter M35 grade cobalt steel twist drill bits, packed in a plastic case for easy storage and carrying. Manufactured to German DIN338 standard..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Red Label Abrasives 2 X 42 Inch Knife Sharpening Sanding Belts - Premium Ceramic - Coarse Grits - 6 Pack Assortment

  • Kit includes 1 each: P36, P40, P60, P80, P100, and P120 grit premium ceramic sanding belts (6 total).
  • Industrial quality metalworking material designed specifically for knife making | Closed coat | Heavy duty y-weight polyester cloth backing.
  • Precision engineered bi-directional tape joint | Anti-clogging stearate to reduce heat and buildup | Resin over resin bonding for long belt life.
  • Wet or dry applications | Unique properties of ceramic grain deliver outlast other types (zirconia, silicon carbide, aluminum oxide, etc.) | Great for general metalworking as well.
  • Factory direct | Hand built in usa by Red Label Abrasives | Money back guarantee.
Check Stock

Hymnorq Metric 1.0-10 mm Straight Shank M35 Grade Cobalt Steel Jobber Length Twist Drill Bits Set of 19pcs for Metals, Packed in Indexed Metal Case

  • ...The set includes 19pcs of M35 cobalt steel twist drill bits: 1mm, 1.5mm, 2mm, 2.5mm, 3mm, 3.5mm, 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 6.5mm, 7 mm, 7.5mm, 8 mm, 8.5mm, 9 mm, 9.5mm, 10 mm. Well organized in a tough metal indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Hymnorq 7/16 Inch Dia. x 5.51 Inch Long M35 Cobalt Steel Twist Jobber Length Drill Bits 2PC Set, 135 Degree Split Point, Extremely Heat Resistant, for Stainless Steel and Cast Iron

  • ...ing and accurate centering, fit for standard drill chucks and regular round collet chucks..
  • 2PC 7/16 INCH FRACTIONAL BITS - The set includes 2pcs of M35 cobalt steel twist drill bits. Total length: 5.51".
  • working length: 4.06". Manufactured to German DIN338 standard. Packed in a plastic bag and a flat paper box..
  • FOR METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

6-Inch Cross-Slide Drill Press Vise X-Y Compound Vise 2 Way Heavy Duty Cross Slide Vise Clamp Machine Metal Milling

  • Material - This X-Y compound vise made of heavy duty cast iron construction, Powerful serrated steel jaws.
  • Size - 6" wide machinist jaws ,Maximum jaws opening: 5.9" , Jaw depth 2.08 inch.
  • Vice Travel X: 5.5inch Vice Travel Y: 7.48inch.cold rolled steel....
  • Usage - uyoyous cross slide vise have swivel crank handles for adjusting vise front to back and left to right, bolt down slots for securing..
  • Function - Hinged vise crank handles drops out of the way, designed for woodworking and metalworking..
  • Wide Application - our heavy duty cross slide vise designed for woodworking and metalworking, widely used in milling machine, drill press and....
Check Stock

Hymnorq Metric M35 Cobalt Steel Extremely Heat Resistant Twist Drill Bits with Straight Shank Set of 13pcs to Cut Through Hard Metals Such as Stainless Steel and Cast Iron

  • ... 13PC METRIC BITS - The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a plastic indexed storage case for easy transport to your worksite..
  • FOR METALWORKING - Particularly successful in cutting through hard metals such as stainless steel and cast iron, although they can be used for softer materials, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Hymnorq 13PC Metric M35 Grade Cobalt Steel Twist Drill Bits – Metal Index Organizer Case and Straight Shank – 1.5mm to 6.5mm – Ideal for Drilling Cast Iron, Stainless Steel and Other Hard Materials

  • ...and extra longer life span, with up to twelve times when compared with an average HSS drill bit..
  • 135°SPLIT POINT – the 135°quick-cut split point are self-centering and able to penetrate metals quickly with less pressure, prevent bits from “walking and wanding”. Easy cutting without need of center punch..
  • FOR METALWORKING – Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • 13PC METRIC SET – The set includes 13pcs of M35 cobalt steel twist drill bits: 1.5mm, 2mm, 2.5mm, 3mm, 3.2mm, 3.5mm, 4mm, 4.5mm, 4.8mm, 5mm, 5.5mm, 6mm, 6.5mm. Well organized in a metal indexed storage case for easy transport to your worksite..
  • DOWNLOADABLE USER GUIDE – We’ve summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock

Mixiflor 40Pcs Cone Shape Abrasive Sandpaper 1/4 Inch Shank Flap Wheels 80/120/180/240/320 Grits Aluminum Oxide for Removing Rust Deburring Polishin

  • MOST COMMON SHANK SIZE: The 1/4 shank makes these abrasive wheels suitable to be used as sanding wheels for electric drills, cordless drills, die....
  • METALWORKING APPLICATIONS: The mounted flap sanding wheels are commonly used in metalworking as a grinding or deburring wheel to clean up welds and....
  • WOODWORKING APPLICATIONS: Often used for flap sander wheels in woodworking for the stripping of old layers of paint when during resurfacing projects....
  • PREMIUM MATERIALS: High quality aluminum oxide coated abrasive cloth provides a solid and durable grinding power combined with high efficiency and....
  • YOU WILL GET: 6*15mm Cone Shape Abrasive Sandpapert - 5 Different Sanding sizes ‒ 8 pcs of each 80/120/180 /240/ 320 grits.
Check Stock

Hymnorq Jobber Twist Drill Bits 15pc Set, Fractionsh Inch Size 1/16 to 3/8 in Premium Index Case, M35 Cobalt Steel, 135 Degree Split Point, For Stainless Steel Iron and Other Metals

  • ...C SET - The set includes 15pcs (12different sizes: 2 pieces of 1/16", 3/32",1/8" bits, and 1 piece of 5/64", 7/64", 9/64", 5/32", 3/16", 7/32", 14", 5/16" and 3/8" bit) of fractional inch size M35 grade cobalt steel twist drill bits, packed in a hard ABS plastic indexed case. Manufactured to German DIN338 standard..
  • METALWORKING - Particularly successful in cutting through hard metals(hardness less than HRC38°) such as stainless steel and cast iron, although they can be used for softer materials like copper and aluminium, too. Not for hardened steel / high carbon steel. Try to adjust the RPM when it fails to penetrate..
  • DOWNLOADABLE USER GUIDE - We've summed up some tips of drilling metals, including a RPM chart for several common metals, based on our reviews and some articles on the internet. In most cases, our customers would get a much better result with these tips. Welcome to download..
Check Stock