Reviews Metal Tubing

Raindrip 63100UB Professional Hole Punch

  • Punch holes in supply tubing for easier insertion of ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Works anywhere along the length of supply tubing where you want to insert a micro fitting or dripper.
  • The Hole Punch Tool punches a hole in supply tubing to insert fittings to connect tubing or drippers with barbed inserts.
  • Holds ½ in., 5/8 in., and 0.710 in. supply tubing to punch holes to fit ¼ in. barbed fittings and emitters with ¼ in. barbed inserts.
  • Use with ½ in., 5/8 in., or 0.710 in. Supply Tubing to punch holes.
  • Hand-held tool is designed with a comfortable pistol grip for strain-free use.
  • Metal hole punch tip penetrates tubing wall when handgrip is pressed.
  • Sliding shelf on tubing rest slides out to accommodate larger sized tubing.
  • Comes with one Pistol Grip Hole Punch Tool.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts

  • 8 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1 O.D Square Tubing Insert 3/8-16 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 3/8-16 Threads.
  • Square Tubing Threaded Insert - Fits 1" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 3/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 5/8" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

Threaded Inserts for Square Tubing - Metal Threaded Star Type Insert 1-1/4 O.D Square Tubing Insert 1/4-20 Threads - Square Threaded Tube Inserts 4

  • 4 Pack Threaded Star Type Square Tubing Insert 1/4-20 Threads.
  • Square Tubing Threaded Insert - Fits 1-1/4" outside diameter tubing with 16/18 gauge wall thickness.
  • Metal Threaded Star Type Insert - Provided with a zinc plated finish. Metal star type inserts are designed to insert inside steel tubular legs.
  • Square Tubing Threaded Insert - As the threaded insert gets inserted into the tube, the star washer/clip flexes normally to bend in the direction of....
  • Threaded Inserts for Square Tube - External edges fit flush with the outside edge of the tubing for a clean, finished appearance.
Check Stock

PneumaticPlus PN15 Series Push to Connect Tube Fitting, Male Elbow (1/4\ Tube X 1/8\ NPT) - Pack of 5

  • PN series is high performing, extremely compact push-in full metal fitting.
  • To connect, simply push the Straight-cut tubing (Outer Diameter) in metal sleeve.
  • the stainless steel teeth grip onto the tubing and lock it.
  • Working Temp.: -4 ~ 160 Fahrenheit/ Max. Working Press: 261 PSI.
  • 1/4" OD Tubing X 1/8" NPT Male (Nominal Ourside Pipe Diameter OD: 0.405").
  • Recommended Tubing: Polyurethane, Nylon, Polyethylene / Application: Air Bag, Air Suspension, Pneumatic Tools, Air Compressor, and etc....
Check Stock

8 Pack 1 1/2 Inch Round Plastic Plug, Pipe Tubing End Cap, Glide Insert Furniture Finishing Plug for Round Metal Tube

  • ** Measure Carefully! ** PLUGS WILL NOT FIT 1 1/2″ OPENING ►APPLICABLE SIZE-These round tubing end caps fits 1-1/2″ OD round tubing (one inch OUTSIDE diameter) with INSIDE hole diameters (ID) from 1.32″ – 1.43″ and wall thickness of .031″ – .059″ Steel Pipe..
  • ►Perfect Fit For Indoor and Outdoor Use- These Round Plastic Tubing Plug serve as a long-lasting solution for many household or outdoor projects including replacements for metal tube, lighting stand cross bar, boat seat post holes, bakers rack, bunk bed ladde, iron loveseat, tubular shaped metal legs, pre-runner bumpers, wrought iron patio chairs, wrought iron glider swing, wooden slat lawn chair, dining room chairs, chair legs, bar stool, kitchen chair, hollow leg chairs, or any round opening..
  • ►The premium plastic plug can supply a clean look, and they are gentle on floors causing no markings, work great for preventing scuffs on wood floor or as protection glides on chair tips, bar stool foot sliders, bench feet, table legs, patio furniture inserts, chair leg protectors, and much more. Strong plastic plugs and they glide nicely on a wood deck.
  • ►These round tubing caps made of Premium Quality Plastic, sturdy, Durable shockproof and waterproof....
Check Stock

9' L Reciprocating Saw Blade, 5 pk.

  • 10 TPI, 9 in. Length, Bi-Metal Construction.
  • 1/2 in. Universal Tang fits all Sawzalls.5 blades per pouch.Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.Limited warranty.
  • 1/2 in. Universal Tang fits all Sawzalls.
  • Ideal for demolition, plumbing, remodeling and general metal cutting. Cuts pipe, channels, tubing, angle iron up to 4 in., nail embedded wood, and steel.
Check Stock

HoldRite 261J8 Silencer Thru-Stud Isolator, 1/2 Inch, 8 Pack

  • IDEAL: Thru-stud isolators for metal studs/brackets with CTS insert.
  • POSITIONING: Dissimilar metal isolation for copper, CPVC, and PEX tubing.
  • THRU-STUD ISOLATION: Tubing isolation, dissimilar metal isolation, and vertical and horizontal applications.
  • VERSATILE: Integrates with HoldRite #121 and #125 Series brackets.
Check Stock

3 in 1 Tube Bender - Yellow Jacket 60390

  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • INCLUDED COMPONENTS: Bender body, crossbar, reverse bending attachment and mandrels for 1/4", 5/16", 3/8", 1/2", 5/8", 3/4" and 7"8 tubing.
  • 【Complete accessories】: The pipe bender kit has a variety of tools to meet different needs. The kit includes 1 x Bender, 7 x Fiber Wheel, 1 x Pipe Cutter, 2 x Flip Arm, 1 x Trimmer..
Check Stock

Hilmor Reverse Bending Attachment - HVAC Tool Tube Bender, Black, CBRBM 1890999

  • BENDER ATTACHMENT: Attach this two piece reverse bender to the Hilmor Compact Bender 1926598 (sold separately).
  • POWERFUL AND COMPACT: Bending soft metal pipes and tubing has never been easier. The proprietary design allows it to fit where others can't, while not compromising on the capability or quality of the resulting bend.
  • EASY TO SETUP: Place universal crossbar and desired color-coded mandrel on handle, snap into place, click pumping lever into ready position, and place tubing between bar and mandrel.
  • ONE-HANDED OPERATION: The ratcheting mechanism and innovative release lever allow for bending with one hand. Pump lever until desired angle is achieved, up to 90degrees. Simply press release trigger above lever to retract mandrel for easy tube release, ensuring no damage to the metal.
  • TUBE SPECIFICATIONS: Bends 1/4” to 7/8”, 1/4”, 5/16”, 3/8”, 1/2”, 5/8”, 3/4” and 7/8” Tubing made of soft metals like copper, steel, aluminum, brass.
Check Stock

Combi Automatic Timer Drain for Compressors with Built-in Strainer and Ball Valve – 115V, 1/2-inch,1/2 in X 3/8 Out NPT, 4mm Orifice, CBV-74201000 by Alpha-Pure

  • Typical Application:Instrumentation, hydraulic and pneumatic systems.
  • Pressure:150psi maximum.(Does not include plastic tubing).
  • Temperature Range:-65°F to +250°F (-53°C to +121°C) with metal tubing For valves using compatible tubing ,refer to tubing temperature range..
  • Material:Brass bodies, steel handles except where noted..
  • Used With:copper,aluminum,steel and plastic tubing where applicable..
Check Stock