Reviews Metal Stud Tv Mounting Kit

Elephant Anchors [50 Sets+ Drill Bit] - TV mounting Bolts for TV Mount into Drywall & TV Mount into Metal Studs Dual Use Drywall Anchors When no Studs or anchoring into Metal Studs

  • DUAL USE : NO STUD OR METAL STUD : Mount your TV anywhere, Use when no studs align to the tv mount holes or when mounting on metal stud walls. Best anchors for mounting TV with Tilt or Fixed TV Mounts. Mount up to 90lbs TVs. 50 anchors, screws , washer and drill bit are included..
  • A Revolution in Mounting - Our drywall anchors can be pre-installed without using a bolt and don't fall behind the wall when the bolt is removed. The Elephant anchor provides a secure hold from within various hollow materials 3/8" to 3" thick including drywall, MDF, sheetrock, plasterboard, sheet rock, gypsum board, buster board, and custard board..
  • Heavy Duty Mounting - Perfect for TV mounting and hanging curtain rods, lamps, photo frames, coat racks, flat panel TVs, lighting fixtures, hand rails, grab bars, ADA hardware, shelves, cabinets, barn doors, solar panels, garage doors, sinks, brackets, a shower door, and so much more!.
  • Quality Construction for Quality Construction - Each anchor consists of a corrosion-resistant zinc-plated metal channel.
  • plastic straps attached to the channel that position it into place.
  • and a plastic flange that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material..
Check Stock

Mounting Dream TV Mount Fixed for Most 42-70 Inch Flat Screen TVs TV Wall Mount Bracket up to VESA 600 x 400mm and 132 lbs - Fits 16 /18 /24 Studs - Low Profile and Space Saving MD2163-K

  • [Universal TV Wall Mount] Fixed TV wall mount fit most 42-70 inch, like general 42, 43, 50, 55, 65, 70, flat screen or curved TV up to 132 LBS. Flat TV mount fixed on wall is designed for TV VESA/mounting hole spacing of 600x400mm/500x300mm/400x400mm/400x300mm/400x200mm/300x300mm/200x300mm/300x200mm/200x200mm/200x100mm. TV wall bracket work for most LED OLED LCD, like Samsung/LG/TCL/Sony/Vizio/Hisense etc. large screen TV. TV mounting bracket fit 16”, 18", 24" wood stud and brick/concrete wall..
  • [Low Profile TV Mount] Ultra slim TV mount makes your TV 1. 1” to the wall, narrow gap and greatly saving space Flush TV mount can blend TVs in with any décor, with its extra slim profile and very much of a streamline look. Search MD2361-K for 1.1” flush profile smaller TV mount. Search MD2868-LK for the tilt version TV mount..
  • [Easy Wall Mount for TV]TV wall holder, with classic pulling straps design, quick release and lock TV breezily, no screwdriver needed. Combined pre-labeled hardware kit with clear instruction and bubble level, mounting TV bracket in less than 30 minutes. (Concrete Anchors available on request. Anchors Specifications：φ10x50mm) Search MD2351 for an even easier TV mount..
Check Stock

200lbs Metal Stud Wall & Drywall TV Mounting Kit for TV Mounts - Includes 4 Elephant Anchors, Titanium Drill Bit and TV Mounting Hardware

  • METAL/STEEL STUD WALL MOUNTING KIT. Complete mouting kit to facilitates secure & easy installation of TVs or other objects on metal/steel studs or drywall. Metal studs are common in home basements, above fireplaces, extensions, condominiums, home additions, apartments and commercial construction..
  • STUD NOT REQUIRED. Break strength 200lbs . The 4 Pieces of Elephant Anchors provided can be used on Gypsum board, Drywall, Tile over drywall, Plasterboard, Composite panels, Cement board, Plaster, Stucco..
  • COMPLETE KIT – One 1/2″ hex socket titanium drill bit, 4pcs of ¼ -20hollow wall toggle anchors, 4pcs of ¼-20 x 2’’ screws, 4pcs of ¼’’ washer. NO trips to Home Depot or Lowes..
  • OTHER MOUNTING USE – Wall Mounting of Shelves, Wall Mounting of Cabinets, Wall Mounting Bathroom Accessories, Wall Mounting Grab Bar, Mounting Vanity, Draperies, Curtain Rods, Blinds and Mirrors when studs are not an option..
  • NEATLY LABELED PACKAGING & MANUAL– The components in this package is separated by different use, the instruction manual is also included.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock

CondoMounts Tile/Granite/Marble Mounting Kit for Grab Bars, Hand Rails, Towel Hanger, TVs. Mount Without Studs | Diamond Drill Bit with 4 x 90lbs Wall Anchors

  • No Stud Required Mounting - No stud? No problem! The CondoMounts Complete tile Mounting Kit Can support up to 90lbs on drywall making it the strongest hollow wall anchor available in the market. Now you can complete your DIY projects with confidence and ease!.
  • The Complete Kit – Save multiple trips to the hardware store! Our Complete Tile/Marble/Granite Wall Mounting Kit includes One 1/2" diamond drill bit, 4 pieces of 90lbs hollow wall toggle anchors, 4 pieces of ¼-20 x 2’’ Stainless Steel screws, and 4 individual ¼’’ washers. A Screw length of 2" is provided catering to most wall types..
  • Other Mounting Uses – The CondoMounts Tile Mounting Kit can also be used for other home applications including Mounting Sinks, Cabinets, Bathroom Accessories, Grab Bars, Vanities, Draperies, Curtain Rods, Blinds, Mirrors and so much more!.
  • Mount On Almost Any Surface - The 4 elephant anchors provided can be used to mount almost anything to many different types of material. The tiles will have different types of backings, These include Gypsum board, Drywall, Tile, granite, marble over drywall/cement board, Plasterbo....
Check Stock

Mount-It! TV Wall Mount Bracket Full Motion Computer Monitor Arm, Swivel Tilting Corner Bracket for 23 - 42 inch Screen LCD LED Plasma 4K Flat Panel Screen TV, up to VESA 200 66 Lb Capacity (MI-2041L)

  • Universal TV wall mounting bracket design fits most of 23-42″ LCD/LED/Plasma TVs on the market up to VESA 200×200 and 66 lbs (Fits VESA 200x200, 200x100, 100×100, 75×75, 50×50 mm). Please check VESA (mounting hole pattern behind TV), stud spacing, possible blocked cable/input and TV weight prior to making purchase decision to determine whether this TV wall mount fits your TV and the installation application..
  • This wall mounting kit is compatible with Samsung, Sony, LG, Sharp, Insignia, Vizio, Haier, Toshiba, Sharp, Element, TCL, Westinghouse 23, 24, 27, 30, 32, 36, 37, 40, 42 inch TVs. Please ensure your TV has VESA 200 pattern or smaller..
  • Tilt, Swivel, Articulate, Extend, Collapse with this universal TV wall mounting bracket. Full motion capability makes is ideal for corner installation, over a fireplace, inside a TV center. TV stays as close as 2.4″ from the wall or can extend up to 20 inches. Swivel left or right 180 degrees. Effortless 180° swiveling capability gives you the best view from any seat in the house..
  • Continuous Tilt Feature (up to 15 degrees down or up) for Better Viewing Angle and Reduced Glare. Low-profile design ensures TV is close to the wall for a sleek finish..
Check Stock

Mounting Dream TV Mount Fixed for Most 26-55 Inch LED, LCD and Plasma TV, TV Wall Mount TV Bracket up to VESA 400x400mm and 100 LBS Loading Capacity, Low Profile and Space Saving Flat Mount MD2361-K

  • ...eparately per request). Search MD2361-32 for 24”/32” stud spacing..
  • [ Low Profile TV Wall Mount ] Narrow gap between this TV bracket and the wall, 1.1” in number, very much of an ultra slim TV mount. Flush TV mount saving space with super sleek look, blending TVs in with any décor..
  • [ Heavy Duty TV Hanger ] TV mounting bracket with solidly one-piece wall plate, ok to hold TVs up to 100 LBS. Wall mount bracket for TV by advanced auto-welding robot, shaped without any potential human error. (Note: this TV Mount is NOT for drywall alone installation) Search MD2163-K for heavyweights, bigger version of MD2361-K flush wall mount..
  • [ Easy Wall Mount ] Combined pre-labeled Hardware kit with clear instruction and bubble level, mounting TV brackets in less than 30 minutes. Classic pulling straps lock design for TV quick release or locking. Search MD2351 for an even easier one, a small TV mount..
  • [ Responsive Customer Service ] US based customer support is always online to provide you with pre-sale & after-sale support as well as consulting service on mounting bracket use and TV holder installation..
Check Stock

Steel Stud TV Mounting Kit for Tilt & Low Profile TV Mounts - Includes 4 Snaptoggle Anchors, Steel Drill Bit and TV Mounting Hardware

  • This kit's basically the "easy button" for mounting a TV to steel studs - it includes everything you'll need to make it happen..
  • You like us? We like Toggler. Included in this kit: 4 of their UL rated Snaptoggle anchors (1/4 x 20 x 1.75).
  • No drill bit, no problem! It comes with this kit. You'll just need a drill with a ½” chuck to complete installation..
  • Includes 4 screws and washers to easily attach your TV mount to the Snaptoggles.
  • Practice safe mounting: Facilitates secure installation to steel stud walls, common in apartments and commercial construction..
Check Stock

Stud Finder Wall Scanner, Wall Stud Finder with 27 Pounds of Pull Magnetic Power, No Batteries Required Stud Finder to Detect & Locate Metal Through Drywall, Wood, Plywood Paneling, Ceramic Tiling

  • ...hes, the wall stud finder easily fits into your pocket or tool bag. The stud finder wall scanner has a hanging hole design so you can string it up and carry around..
  • ➤ NO WORRY FOR SAFETY HAZARDS - The magnetic stud finder can be positioned and fixed in the exact location directly to help you can avoid danger when mounting TV, cabinets, garage shelves, etc. It will be a great birthday gift and Christmas gift to your husband and your father..
  • ➤ WIDE APPLICATIONS - It can be used not only as a stud finder, but also to find some small metal objects dropped on the ground, or pull up metal objects dropped into the gap. The magnetic stud finder is durable enough to withstand being dropped from a ladder or thrown into a toolbox, perfect for decorators, DIY lovers and repairers, etc..
Check Stock

Tilting Wall Mount TV Bracket - Heavy Duty Universal Flat Screen TV Wall Mount - Mounts 42-84' LED/LOLED & Plasma TV Flat Screens - Large Tilt, VESA Mounting, 132 lbs Weight Capacity - PYLE PYWM78

  • FITS 42" TO 84" TV: This space-saving tilting tv wall mount fits any 42 to 84 inch TV and brings you a universal TV mount design creating optimum viewing pleasure as it features a bracket design that easily hooks and mounts onto the wall plate.
  • UNIVERSAL TV MOUNT: Features universal VESA Mounting Interface Standard (MIS), a set of standards for the manufacturing of flat-screen television/computer monitor. This low profile tv wall mount bracket kit fits 16/24-inches stud plus concrete wall.
  • LARGE TILT MOUNT: This tilt tv mount wall bracket for flat screen tv features large tilt mount type w/ 0°~ -8° tilt angle to reduce glare for a better view so you can enjoy your TV exactly the way you want. Great for home, school, and office use.
  • MOUNTING HARDWARE: Includes all necessary hardware and brackets for easy installation. The flat screen tv mount is made w/ heavy duty steel & can be safely used for solid brick / concrete wall mounting. Has an open wall plate design for the outlet.
  • 132 LBS MAX LOAD: Promotes safe and fixed TV mounting and can hold up to 132 lbs load. Made to fit slim flat panel HDTV, LCD, LED, Plasma, Ultrawide Smart TVs - from brands including Samsung, JVC, Magnavox, Panasonic, Sharp, Toshiba, Vizio and more.
Check Stock

Height Adjustable TV Wall Mount, Bracket for Most 42-75 inch LED, LCD Monitor and Plasma TVs, Holds up to 132lbs, Max VESA 600x400mm by XINLEI (MFA6)

  • Compatibility - fits most 42-75" Tvs and holds up to 132lbs of weight supporting up to 24 inch wood stud spacing. The backside mounting holes fit VESA patterns 200x100mm, 200x200mm, 300x200mm, 300x300mm, 400x200mm, 400x300mm, 400x400mm, 500x300mm, 600x200mm, 600x400mm..
  • Easy wall mount- designed for quick release & lock, TVs can be installed and disassembled very easily..
  • Save space - keep your TV 0.98 inch close to the wall to save space and for a sleek and tidy appearance..
  • Notice - before purchasing, check the VESA, TV weight, wall stud location, and possible blocked inputs and outlets..
  • Easy installation - step-by-step user manual and organized hardware kit for hassle free mounting..
Check Stock

UTG New Gen Med Pro Shooters Bipod Quick Detach 6.2 -6.7

  • Patented Quick Detachable Lever Lock Controlled Mounting Base for Rapid Deployment and Detachment.
  • Heavy-duty Full Metal Construction to Meet Harshest Requirements, Innovative Anti-rotation Steel Crossbar Insert for Rock Solid Mounting.
  • Extendable Legs with Spring Tension & Lockable Collar for Most Secure and Flexible Adjustments.
  • Reliable, Finger Friendly Posi-Lock Control for Bipod Leg Folding and Un-folding.
  • Complete with Swivel Stud Kit for use in Swivel Stud Mount Applications.
Check Stock

Mounting Dream TV Wall Mount for Most 37-70 Inch Flat Screen TV Tilting, Low Profile Space Saving Wall Mount for 16\

  • ...vy duty TV wall mounts fits most 37"-70" flat screen or curved TVs with weight up to 132lbs, 60 in kgs. Generally, common 37,40,42,43,46,48,49,50,55,60,65,70 inches, OLED/LCD/LED/Plasma TVs are all covered, of major TV/Monitor brands like Samsung/LG/TCL/Sony/Vizio/Hisense/Toshiba etc. VESA wall mount works for VESA mounting pattern ranging from 200x100mm to 600x400mm. Extra wide TV mounting bracket with 24-inch wall plate, is compatible with 16”, 18”, 24” wood stud, concrete/brick wall as well (Note: dry wall alone excluded)..
  • [Tilt TV Wall Mount]: Adjustable angled TV mount can be freely tilted by max 8 degree, to reduce screen reflection glare and neck/eye strain for better comfortable viewing. When the brackets are at 0°, this flat TV mount surely creates a sleek look. Search MD2163-K for the no tilt version flush wall mount..
  • [Low Profile Wall Mount for TV]: Slim TV wall mount keeps TV just 1.5’’ flush profile against wall, very much of streamlined and tidy looking, easy to blend in with any decor. Mounting TV over a TV stand, this TV wall bracket is greatly saving space for consoles on entertainment center..
  • [Simple TV hanger]: Major TV mounting hardware kits are included in the TV bracket package, like multi-size TV screws, sp....
Check Stock