Reviews Metal Screw Post Fasteners

waybeyondframe Color: Neo Chrome - License Plate Screws Stainless Steel, Set of 4 Fasteners for Front or Rear Plates, Frames Covers on Cars, Trucks, SUVs Rustproof, Self Tapping and M6 Metal caps

  • DURABILITY: Come with 4 anti-rust metal twist on screw caps, you can either insert the metal washer for dry weather condition or insert the plastic washer for snowing or bay area weather condition.
  • RUSTPROOF: This set of fasteners includes 8 stainless steel 4 slotted hex-head screws with a 1/4 inch (.25") diameter and 9/10 inch (.9") long self tapping shank. 4 M6 metric 21mm long screws They are perfect for the front or back license plate and frames or covers of most cars..
  • EASY INSTALLATION: We designed these license plate mounting screws to be durable and easy to install. Insert base washer with the screw and make sure tighten the screw so the washer cant be move. After that twist on screw cap cover.
  • COMATIBILITY: Standard License Plate Screws That Fit Most Domestic Cars & Trucks License Plate Holes That Use Nylon/Plastic Retainer, if is metal threaded holes use the M6 screws.
  • This is the most completed set screw caps fasteners on the market. License frame in any image are not included, this is for the fasteners and screw cap covers only.
Check Stock

Black Chicago Screws, 72 Assorted Pieces of 1/4 & 3/8 Inch - for DIY Kydex and Leather Gun Holsters/Clips and Knife Sheaths, Includes Phillips Truss Heads + Open Slotted Fasteners + Rubber Washers

  • The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear. Each pack includes 72 total pieces - 12 each of 1/4 and 3/8 inch sizes of Phillips Truss Heads, Open Slotted Post Fasteners, and Rubber Washers/Spacers.
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and give it a gun-like matte finish that eliminates any glare. The included washers are resistant to liquids and oils and are able to withstand extreme temperatures..
  • DIMENSIONS – 1/4" Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, 3/8" Phillips Screw Heads have a 3/8” outside diameter and 3/8" long threaded section with an 8-32 thread, Slotted Post Fasteners have a 7/16” outside diameter and 1/4" long threaded section, Rubber Washers have a 1/2" outside diameter..
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product through a rigorous i....
Check Stock

HolsterSmith Sheath and Holster Making - Thermoform Basic Combo Kit

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear.....
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and....
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a....
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product....
Check Stock

Black Chicago Screws, 24 Sets - for DIY Kydex and Leather Gun Holsters/Clips and Knife Sheaths, 1/4 Inch, Includes Phillips Truss Heads + Open Slotted Fasteners + Rubber Washers/Spacers

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear. Each pack includes 24 Phillips Truss Heads, 24 Open Slotted Post Fasteners, and 24 Rubber Washers/Spacers.
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and give it a gun-like matte finish that eliminates any glare. The included washers are resistant to liquids and oils and are able to withstand extreme temperatures..
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a 7/16” outside diameter and 1/4" long threaded section, Rubber Washers have a 1/2" outside diameter.
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product through a rigorous inspection procedure. We are confident that you will be happy with your purchase and we stand by our product. In the extremely unlikely occurre....
Check Stock

Black Chicago Screws, 12 Sets - for DIY Kydex and Leather Gun Holsters/Clips and Knife Sheaths, 1/4 Inch, Includes Phillips Truss Heads + Open Slotted Fasteners + Rubber Washers/Spacers

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear. Each pack includes 12 Phillips Truss Heads, 12 Open Slotted Post Fasteners, and 12 Rubber Washers/Spacers.
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and give it a gun-like matte finish that eliminates any glare. The included washers are resistant to liquids and oils and are able to withstand extreme temperatures..
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 1/4" long threaded section with an 8-32 thread, Slotted Post Fasteners have a 7/16” outside diameter and 1/4" long threaded section, Rubber Washers have a 1/2" outside diameter.
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product through a rigorous inspection procedure. We are confident that you will be happy with your purchase and we stand by our product. In the extremely unlikely occurre....
Check Stock

DIY Your Odd Sizes Band Hose Clamp Assortment Kit 14 FT Straps with 10 Fasteners Large Long Adjustable Worm Gear Screw Hose Clamps Stainless Steel Duct Clamp Pipe Clamp Metal Strapping

  • Cost-effective: This stainless steel hose clamps assortment is a home improvement items you can make any sizes of metal clamps and save more from the price of pre-made worm drive hose clamps..
  • Quality Fasteners: Our band clamps will not be easily bent and stripped out when tightening. The min.ultimate torque is 58 lbf-in. The hex size of screw clamp is 5/16 inch..
  • All 304 SS: The 1/2" wide metal straps and 10 worm clamp fasteners are all made of real 304 stainless steel which are anti-corrosive, reusable and ideal for outdoor use. The screw is 304 stainless too, not carbon steel..
  • Easy To Use: Following the directions included, you will set up the adjustable clamp very fast. Connect the metal strap with hose clamp fasteners, get large hose clamp 10 inch 12 inch 14 inch 16 inch 18 inch 20 inch 24 inch 30 & 40 inch extra large!.
  • Widely Used: Our stainless hose clamp assortment set can diy hose clamps in min.2.5 inch and max.53 inch diameter for any pipe clamp duct clamp plumbing, metal strapping banding for round posts, segmented wood, muffler heat shield. It work better than long metal zip ties as it's easy to release and reusable for more projects!.
Check Stock

DEWALT Drywall Screw Gun, 6.5-Amp (DW269)

  • Helical-cut steel and heat-treated gears for long life and durability of the screw gun.
  • DEWALT screw gun has high power motor for metal fastening applications.
  • Versa-Clutch torque adjustment system of the drywall screw gun dials in the proper torque needed to efficiently drive fasteners without stripping or breaking.
  • Two-finger trigger for increased comfort and ease of use.
  • Metal nose and gear case for durability on the job.
  • Excellent ergonomics offers less user fatigue.
Check Stock

NEIKO 01925A Screw-Extractor and Left-Hand Drill-Bit Set, HSS M2 Steel Drill Bits, Alloy Spiral Flutes, Reverse Drill-Bit and Bolt Extractor, Easily Remove Stripped Screws and Broken Bolts, 10 Pieces

  • BOLT EXTRACTORS: Extraction bits easily remove broken screws, studs, bolts and other fittings effectively. Stripped bolt remover and extractor works on seized bolts, broken fasteners, and commonly called an easy out..
  • LEFT HANDED DRILL BIT: Left-hand drill bits are made from cobalt fortified high speed steel for increased durability and service life. Reversed drill bit are used for removing broken bolts or studs turning left to prevent further tightening of the bolt or screw..
  • SPIRAL FLUTES: Unscrew tool with spiral flute bit dig into the screw, increasing grip as torque is applied for removal of screws, fasteners and bolts. Strip screw extractor kit gets those stubborn fasteners out..
  • METAL CARRYING CASE: Stored in a durable metal index carrying case for easy organization and storage with all sizes that are clearly labeled. Carrying size for when WD40 or easy out lubricant doesn’t get the job done..
  • INCLUDES: Sizes: Left hand bits / reversed drillbits - 5/64", 7/64", 5/32", 1/4", 19/64" and Matching Alloy Extractors (stud outs) - #1, #2, #3, #4, #5 in a ....
Check Stock

DEWALT Drywall Screw Gun, Variable Speed Reversible, 6.5-Amp (DW267)

  • Helical-cut steel and heat-treated gears for long life and durability of the screw gun.
  • DEWALT screw gun has high power motor for metal fastening applications.
  • Versa-Clutch torque adjustment system of the drywall screw gun dials in the proper torque needed to efficiently drive fasteners without stripping or breaking.
  • Two-finger trigger for increased comfort and ease of use.
  • Metal nose and gear case for durability on the job.
  • Excellent ergonomics offers less user fatigue.
Check Stock

SNUG Fasteners (SNG64) 100 Qty #10 x 1 Zinc Hex Washer Head TEK Self Drilling Sheet Metal Screws, Count

  • For use in steel, sheet metal, and attaches metal or steel to metal or sheet metal steel..
  • Material: High Quality 410 Stainless Steel, great strength and good corrosion resistance to make fasteners last!.
Check Stock

Black Chicago Screws 24 Sets - for DIY Kydex and Leather Gun Holsters/Clips and Knife Sheaths 3/8 Inch Includes Phillips Truss Heads + Open Slotted Fasteners + Rubber Washers/Spacers

  • CHICAGO SCREWS – The best choice when it comes to DIY Kydex and Leather Holsters, Knife Sheaths, Belt Clips, or any other piece of tactical gear.....
  • EASY TO TIGHTEN – The open slotted fasteners are ideal because they allow for a tighter and more secure connection than non-slotted fasteners.
  • STRONG & DURABLE – Each piece of hardware is made of high carbon steel and coated with a high tech black thermochemical treating to harden it and....
  • DIMENSIONS – Phillips Screw Heads have a 3/8” outside diameter and 3/8" long threaded section with an 8-32 thread, Slotted Post Fasteners have a....
  • 100% SATISFACTION GUARANTEED – We take great pride in our products and make sure that the highest quality standards are met by sending each product....
Check Stock

6 Pairs Screw Ball Backs and 6 Pairs Flat Backs Sugical Stainless Steel Earring Backings Replacement Hypoallergenic for 18/20G Threaded Post Screw Studs Earrings（Pack of 6)

  • 003eThe screw earring backs suitable for 18/20G piercings post stud earrings.***Earring backs metal: 316L sugical stainless steel, hypoallergenic for sensitive skin. Nickel free and lead free..
  • 003e4mm ball style screw earring backs: 3 Pairs 0.8mm for 20G and 3 Pairs 1.0mm for 18G threaded piercings post studs. 0.48g/pair lightweight screw backs.
  • 003e4mm*2mm flat style screw earring backs: 3 Pairs 0.8mm for 20G and 3 Pairs 1.0mm for 18G threaded piercings post studs. 0.38g/pair lightweight screw backs.
  • 003eThe stainless steel earring backings support have extremely strong and secure crip, Comfortable replacement screw earring backs to fit snug enough for most screw stud earrings..
  • 003e12 pairs earring backs come with a jewelry pouch for storage and giving. Sturdy pierced earring backs for nomal stud earrings..
Check Stock

Bobco Metals 3\ Heavy Duty Weldable Hinges - Steel Butt Hinge Design for Heavy Gates & Doors - Long Lasting - Corrosion & Rust Resistant - 1 Pair

  • Bobco Metals 3" Heavy Duty Weldable Hinges are made of good quality steel that is durable, sturdy, and long-lasting use. It is easy to use, perfect for high-stress applications, such as holding up heavyweight gates, doors, and more..
  • These weldable hinge plates are 1/4" thick and weighs 0.25 lbs each. They are designed to connect the gate to the post, and typically are used where a hinge must be welded to another metal surface. Moreover, when a heavy duty drill bit is used, they can have holes drilled in them for screw mounting..
  • Weld-on hinges won’t have to use screws or other fasteners. Also, these hinges are suited for permanent applications than bolt-on hinges. They provide more strength and security and a good choice for your gates, trailers, door, or for tailgates. Thus, making the installation easier..
  • These steel hinges are uncoated, and are their natural dark grey. They can be painted to match the metal surface to which they are attached..
  • All hinges are packaged with care. Rest assured, your hinges will arrive in perfect condition and ready to use out of the box!.
Check Stock