Reviews Metal Roof Stove Pipe Flashing

DEKTITE #1 DF101G Gray EPDM Flexible Round Pipe Flashing Dektite fits OD Pipe Sizes 1/4 - 2-1/2 - Metal Roof Jack Pipe Boot - Metal Roofing Pipe Flashing - Deks Dektite

  • Flashing Base Diameter is 4-3/4", Pipe Boot Fits From 1/4" to 2-1/2" Outside Pipe Diameter.
  • Continuous Service Temperature Ranges of -58F to 239F (EPDM).
  • Easily Customize Pipe Boot Size on the Job Site With Shears or Heavy Scissors.
  • Slide Flashing Down Pipe and Fasten Aluminum Collar To Roof With Metal Roofing Screws Every 1-1/2".
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar) Seals Against Uneven Metal Roofing with Ease.
Check Stock

Oatey 14052 Retro Master 0.25\-5.75\ Pipe Diameter Roof Flashing 8\ x 8\ Base, Black

  • Slides over pipe - for pitch to 45 degrees.
  • Use silicone sealant between base and surface, and secure with sheet metal screws.
  • Continuous Temperature Resistance to 212 Degree F. Intermittent Temperature Resistance to 275 Degree F..
Check Stock

Vent Systems 4 inch Round Roof Cap Galvanized Metal for All Weather Conditions Top Round Exhaust Cap with Rubber for Perfect Insulation Vent Cover 4 100 mm

  • Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space.
  • Designed With No Moving Parts Ensuring Longer Product Life-Time.
  • Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind.
  • Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation..
  • Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product..
Check Stock

Blunt Wipes 7pipe approved by WIPEMART | 2 packs

  • Flashing Base is 18" by 18" - Pipe Boot Fits 6" x 12" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 21 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

Vent Systems 8" Inch Round Chimney Cap Galvanized Steel for All Weather Conditions Top Round Exhaust Cap with Rubber for Perfect Insulation Roof Vent Cap Vent Cover 8 Inch 200 mm

  • Metal Round Roof Cap Prevents Odors And Gasses From Invading Rv Living Space.
  • Designed With No Moving Parts Ensuring Longer Product Life-Time.
  • Usable Such As Roof Rain Cap, Roof Vent, Stove Pipe Cap, Air Exhaust. Prevents From Rain And Wind.
  • Made Of High Quality Galvanized Steel With Rubber Around The Pipe For Better Insulation..
  • Easy to use, install, remove and clean. Suits very good with other Vent Systems HVAC products. Great outdoor Home improvement and DIY product..
Check Stock

Dektite Premium #7 Red Silicone Metal Roof Pipe Flashing, High Temp, Square Base, Pipe OD 6' to 12'

  • Flashing Base is 18" by 18" - Pipe Boot Fits 6" To 12" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

DEKTITE #2 (DFE102B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing Dektite (for OD Pipe Sizes 1/4\ - 3\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • EPDM Rubber Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 1/4" to 3" Pipe OD..
  • Metal Roofing Pipe Flashing Boot is Designed for on-site Adjustment with a base of 7" x 7".
Check Stock

Oatey 14049 Retro Master 0.25\-5.75\ Pipe Diameter Roof Flashing 8\ x 8\ Base, Black

  • Retro master flashing slides over vent pipe for pitch to 45 degree..
  • Flexible base conforms to most flat or contoured roof surfaces including clay tile and metal roofs..
  • Continuous temperature resistance to 212 degree f. Intermittent temperature resistance to 275 degree f..
Check Stock

3/4” x 30 ” Black Malleable Steel Nipples Fitting 3/4 Inches Threaded Pipe Nipples DIY Steampunk Industrial Vintage Style 10 Pack.

  • Flashing Base Diameter is 14-3/4" - Fits 6" to 11" Outside Pipe Diameter.
  • Continuous Service High Temperature Ranges of -58F to 392F (Silicone).
  • If Trimmed and Installed Correctly, Pipe Flashing Will Not Break or Crack.
  • Use for Stove Pipes, Chimneys, Plumbing, Heating, Air Conditioning, Electrical, and Exhaust Vents.
  • 20 Year Manufacturer's Warranty Against Manufacturing Defects.
Check Stock

DEKTITE #9 (DFE109B) Square Black EPDM Flexible Pipe Flashing, Roof Jack, Pipe Boot Flashing (for OD Pipe Sizes 9\ - 20\)

  • Dektite Base Seals Against Uneven Metal Roofing with Ease. Pipe Flashing Will Not Break or Crack..
  • This Pipe Flashing Boot Made By Deks is Made of EPDM for Long Life Even at Extreme Temperatures.
  • Black Dektite Pipe Flashing is Rated for Continuous Service Temperature Ranges of -58˚F to +239˚ F.
  • Black (EPDM) Boot with Flexible Base (Aluminum Collar). Pipe Boot Fits 9” to 20” Pipe OD..
  • Black (EPDM) Dektite SQUARE Standard Flexible Pipe Boot Flashing. Base is 26-3/4" X 26-3/4".
Check Stock

Cozy Co Butyl Rubber Waterproof Tape 4” X 50’ (White/Gray) Weatherproof RV, Roof Window Sealant, Flashing, Seam, Surface Crack, Pipe Rupture, Boat Sealing

  • Wider Yellow Paper Release Liner Make it Easy To Peel Off.
  • Roof, RV Sealant, Roof flashing, Window Flashing, Surface Crack, Pipe Rupture, Boat Sealing, etc..
  • Quality Of COZY Co Has Been Proved By Construction, Vehicle Industry For a Long Time..
  • Adhesion Increases Over Time. Long Lasting Usage.
Check Stock

Malco Portable Mini Brake, 48 In, 22 Ga Capacity

  • Bends up to 135 degrees in 22 gauge galvanized sheet metal.
  • Bends metal roofing components and roof flashing including copper and aluminum.
  • Ideal for fabricating plenums or large transitions at the job site.
  • Makes compact fabrications as small as a 4-inch square.
  • Accommodates sheet metal up to 4 feet wide.
Check Stock

Guide Gear Outdoor Stove Accessory Bundle

  • EXHAUST EXTENSIONS: Extend the exhaust of your outdoor wood stove with this 2 piece pipe extension set.
  • ADD ALMOST 4 FEET: Each pipe measures 5.5 inches in diameter and 21 inches long, extending your pipe by almost 4 feet.
  • THICK METAL: Crafted from durable metal designed to handle the heat.
  • Black finish prevents rust corrosion from exposure.
  • SIZED TO FIT: Compatible with the Guide Gear Large Outdoor Wood Burning Stove (item 718708.
  • Dimensions (Diam. x L): 5.5 x 21 inches (each).
  • Manufacturer warranty: Lifetime warranty.
Check Stock