Reviews Metal Processing

Schwer Highest Level Cut Resistant Stainless Steel Metal Mesh Chainmail Glove for Meat Cutting Butcher Glove（XXL）

  • 【Adjustable Wrist Clasp】- The stainless steel mesh clasp is convenient, and you can adjust it for the right fit. Compared with mesh gloves with fabric cuffs, a stainless steel mesh clasp is easier to clean. Clean: Metal mesh gloves should be cleaned daily, particularly in food processing operations. A water temperature of 122° F (50° C) is recommended whether gloves are manually or machine washed..
  • 【Multi Purpose】- Schwer mesh gloves are the premier choice for food processing, restaurant, and food service applications such as meat, fish, and poultry processing, slicing, deboning, shucking, mandoline and slicing. In addition, they are also perfect for industrial product processing such as plastic, leather, wood, glass, paper, and clothes processing..
Check Stock

TECHTONGDA 8X31” Precision Metal Lathe Variable Speed Bench Lathe 900W Brushless Motor DIY Mini Lathe Wood Lathe 110V

  • [Professional Lathe]: Techtongda lathe is used for turning, facing, drilling, boring and turning thread. Also can be used for precision parts processing, sample processing and model processing. With extensive use, simple operation and extensive processing..
  • [900W Brushless Motor]: The newly upgraded 900W brushless motor not only gives more power but also saves you the trouble of replacing the brush..
  • [All Metal]: All the gears are made of metal and the spindle is supported by precision taper roller bearing. High quality materials make its service life longer..
  • [Safety First]: The lathe is equipped with emergency stop switch and overload protection device, which can better protect the operator in emergency..
  • [Infinitely Variable Speed]: This lathe allows both forward and reverse, with the spindle speed can be adjusted in the range of 50-2500rpm which give you the convenience to process the workpiece at will..
Check Stock

Schwer Highest Level Cut Resistant Stainless Steel Metal Mesh Chainmail Glove Butcher Glove for Meat Cutting Food Processing Knife Sharpening Oyster Shucking Kitchen Mandoline Slicing Fish Fillet（S）

  • 【Adjustable Wrist Clasp】- You can adjust the stainless steel mesh clasp for the right fit. Compared with fabric cuffs, a stainless steel mesh clasp is easier to clean. Clean: Metal mesh gloves should be cleaned daily, particularly in food processing operations..
  • 【Premier Choice for Food Processing】- Perfect for restaurant, and food service applications such as meat, fish, and poultry processing, slicing, deboning, shucking, mandoline and slicing. Also perfect for plastic, leather, wood, glass, paper, and clothes processing..
Check Stock

SOBL Mini Mtetal Lathe, 20000rpm Powerful Motor 24W DIY Tool Metal Woodworking Mini Motorized Lathe Machine, Grinder, Driller, Wood Lathe, Metal Lathe Machine, Miller for Wood Plastics

  • ...ps to 2000rpm when using the lathe to machine metal..
  • 【HIGH POWER MOTOR】Super large torque ball bearing motor, maximum rotating speed up to 20000RPM providing ultra strong cutting power with low noise, you can use it at home.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece processing..
  • 【WIDE APPLICATION】Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works,which can process soft metal, nonferrous metal and precious metal..
  • 【SATISFACTION GUARANTEED】TWO YEAR WARRANTY, FREE RETURN AND EXCHANGE!We promises every customer a 100% shopping satisfaction, feel free to reach us if you have any questions about your purchase.We will give you a professional and detailed reply within 24 hours.Click to buy now!.
Check Stock

Machinery Repairman

  • ...e tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock

Upgraded Mini Lathe 7\X14\

  • 【GREAT CONSTRUCTION & POWERFUL】- The mini metal lathe is made from high grade iron with a powerful lathe motor:550W. High grade iron construction makes it more sturdy during turning, drilling, threading and cutting processing.Two rails provides smooth and durable moving..
  • 【NEW UPGRADE DESIGN】-This upgrade mini lathe uses metal gear instead a nylon one,increase service life.Adopts aluminum handwheel is more durable than plastic handwheel,and not easy to be damaged.Digital display screen is convenient for you to follow up the processing.Add automatic power-off protection switch to make the operation safer.An extra lamp can help you finish processing in places with insufficient light.We provide one extra gear belt and free 7PCS lathe carbide tool..
  • 【PRECISION DESIGN】-Power metal lathes has large center distance 350mm(13.78") and swing over bed:180mm (7.09"),spindle bore: 21mm(0.82"). A accurate self-centering 3-jaw is supplied,for holding a variety of round or square cylindrical materials stability.The metal lathe features forward and reverse design. The variable speed of MT4 Spindle range 0-2500RPM, two speeds are available for meet your different metal workings: Low Speed 0-1250RPM, High Speed 100-2250 RPM..
Check Stock

COMOWARE Stubby Drill Bit Set for Metal, 5pcs HSS M2 Short Length Drill Bit with 1/4-Inch Quick Change Hex Shank

  • Premium High Quality - Short length drill bit is made from superior HSS M2 material with evenly distributed carbides for long lasting strength and durability. The drill bit is always sharp at each use..
  • Twist Design - Full ground processing and 135 degrees split point clears chips & particles faster, it also delivers powerful penetration against the metal , plastic, wood and other hard surfaces..
  • Quick Change - 1/4” hex shank fits into all power tools more easily and securely, it is suitable for quick change drill chunks for fast and easy swapping..
  • Application Widely - The drill bit set includes 5pcs of drill bits in 5 different sizes to satisfy your demands: 3/32”, 1/8”, 3/16”, 1/4”, 5/16”. The drill bit set is more suitable for processing plastics and woods, it can be also used for hard metal..
Check Stock

Carbide Burrs 4pcs 12mm Dia 1/4 Shank Single Cut Tungsten Carbide Rotary File Cutting Burs Tool Rotary Drill Die Grinder Bits 4x1/4

  • In a great part of the work, it can replace the petiole small wheel, and no dust pollution..
  • High product processing quality, high finish, can process out a various of high-precision mold cavity.
  • Mainly used on pneumatic or electric tools, the carbide burrs Rotating speed requirement is: 6000-50000 rpm.
  • High production efficiency, the processing efficiency is several times higher than file, nearly 10 times higher than small wheel stalk.
  • Suitable for mold manufacturing, mechanical chamfering and deburring, welding and metal non-metal processing engraving, etc..
Check Stock

LJSF clamp Right Angle Clamp, Single Handle 90°Corner Clamp, Aluminum Alloy Right Angle Clip Clamp Tool Woodworking Photo Frame Vise Hold Simple to use and Durable

  • Cantilever bracket metal table lamp clip accessory base hose.
  • Aluminum metal processing standard with 12MM pipe clamp.
Check Stock

Threads

  • 【5Pcs Solid Carbide Burr Bits】The grinder drill set is made of tungsten carbide, high sharpness and good toughness, machining hardness up to HRC70, great for carving, polishing, drilling.
  • 【Metal Die Grinder Drill Bit】The rotary file is widely used for processing metal(include hardened steel) and non-metal( like wood, bone and marble), perfectly fits for die grinder and drill.
  • 【1/4” Shank Rotary Burr】Size: Shank-1/4inch(6mm), Tip Head-5/16inch(8mm), Total Length 58-65mm, Cutting Burr Shape: Ball, Round Nose, Pointed Tree, Cylinder with End Cut and Cylinder with Round Head.
  • 【Double Cut Head Design】The double burr can cut cleanly and quickly through hardened steel, with smoother surface and no dust pollution compared with grinding wheels or steel cutter.
  • 【Wide Applications】The tungsten grinding bits are widely used in woodworking carving, mold processing, burr cleaning and impeller polishing.
  • Plus package comes with plastic case for safety storage and protection.
Check Stock

4 Pcs Set Long Head Deep Hole Marker, 2023 Best Multi-purpose Deep Hole Marker Pens, Long Head Bathroom Woodworking Decoration Multi-purpose Deep Hole Marker Pens

  • 【Unique Design Marker】- Specially Designed Markers with a 20 Mm Long Nib Make It Easy to Mark Inside Deep Holes and Hard-to-reach Places. with Its Strong and Long Metal Nib, It's the Best Tool to Use in Home Inspections, Renovations, and Fixture Installations. Convenient to Use..
  • 【Quick Dry and Waterproof】- Long Head Deep Hole Marker is Quick-drying, Smudge-proof, and Waterproof. It Can Mark Most Dry and Dust-free Surfaces Like Aluminum, Metal, Concrete, Glass, Wood, Plastic..
  • 【All-round Marker】- Long Head Deep Hole Marker is Suitable for Furniture Decoration, Book Shelf, Lamp Drill Hole Position. It Also Marks Deep Holes for Metal Processing, Automobile Manufacturing, and Other Production Industries..
  • 【Sturdy and Comfortable】- Adopts High-quality Abs Material, Which is Durable, Solid, and Not Easy to Aging. the Overall Size is Stable, Reliable, and Comfortable on the Hand..
  • 【Wide Range of Use】- This Long Nib Deep Hole Pens Can Be Applied on a Variety of Surfaces, Such As Wood, Metal, Glass and Plastic, Suitable for Home Decoration, Hardware Processing, Automobile Manufacturing, Industrial Processing and More..
Check Stock

Mophorn Metal Lathe 7\ x 12\

  • ...ace cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works 9 Cutters for easy replacement..
Check Stock

SENDUO Upgrated Mini Lathe 7\X14\

  • The mini metal lathe features a 550w brushed motor, 110V 60hz. High grade iron construction with robbert feet to be solid and stable turning, drilling, threading and cutting performance. Two rails offer smooth and durable moving..
  • MT4 Spindle speed range 0-2250±10%RPM,have a digital display,which is convenient for customers to operate,the speed levels can be adjusted for different metal workings. The mini lathe machine with a soft start button ,features forward and reverse design..
  • Power metal lathes are with Large Center Distance 13.78"/350mm and Swing Over Bed: 7.09"/180mm. K11-100 3-jaw self-centering chuck with 3 internal jaws and 3 pcs external jaws.Cover and long splashguard offers a clean working and safer condition .the cover have an automatic power-off protection function ..
  • Benchtop Lathe with 4-way tool rest, can help changing and adjusting cutting tools at different directions easily. Loose the fix handle, then you can move the tailstock forth and back.
  • Widely Used-Ideal for sample processing, mini precision parts processing, and modeling works.equiped with Metal gears,Aluminum handwheel,and extra set of the metal gears ,an extra lamp and free 7PCS lathe carbide tool.
Check Stock