Official FLSUN V400 3D Printer Fast 400mm/s 8000+ mm/s² FDM Delta 3D Printer with Pre-Installed Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ300x410mm
- 【400mm/s High Speed Printing & 8000+ mm/s² Acceleration & Pre-installed Klipper Firmware Pad.
- 】 Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time..
- 】 Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm..
- 【High-Speed Integrated Dual-Axis Linear Guide.
- 】 High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise..
- 【All Metal Direct Drive Extrude & 300℃ High-temp Nozzle Support Printing of Various Filament.
- 】 All metal direct drive extrude comes with the pushing force up to 70N, Ultra light weigh only 135g, To meet the high-speed printing requirements of 400mm/s 8000+ mm/s² acceleration, Especially suitable for printing with flexible consumables and hard consumables such as PL....
Check Stock
Official FLSUN V400 3D Printer Fastest 400mm/s 8000+ mm/s² FDM Delta 3D Printer with 7" Klipper Firmware Pad, 300℃ Nozzle, Direct Drive Extruder, PEI Bed, Printing Size Φ11.8x16 Inch
- Equipped 3 x 48W High Power stepper motor and Pre-installed Klipper Firmware Pad support a normal printing speed of Flsun V400 3D Printer up to 400mm/s and 8000+ mm/s² acceleration, enjoy instant high speed printing while maintaining the same molding precision quality, 400% faster than industry standard, enable you save more than 70% of printing time..
- Large printing volume Φ11.8"（Diameter）x 16"(H) / Φ300mm（Diameter）X410mm..
- FLSUN Speeder Pad & High-Speed Integrated Dual-Axis Linear Guide.
- Pre-installed Klipper Firmware 7 Inch FLSUN Speeder Pad Support Wifi Remote control & Wide-angle IPS. High-precision Dual-Axis linear rail guide, providing higher printing accuracy and stability, and lower noise..
- All Metal Direct Drive Extrude & 300℃ High-temp Nozzle Support Printing of Various Filament.
- All metal direct drive extrude comes with the pushing force up to 70N, Ultra light weigh only 135g, To meet the high-speed printing requirements of 400mm/s 8000+ mm/s² acceleration, Especially suitable for printing with flexible con....
Check Stock
QIDI TECH 3D Printer, X-Pro 3D Printer with WiFi Function, Dual Extruder, High Precision Double Color Printing with ABS,PLA,TPU Filament,9.1x5.9x5.9 Inch
- ★★★★★【Friendly Reminder: There is one spool of red color PLA, one spool of white color ABS filament, please check the filament before printing and use the correct settings to print.】QIDI TECH 3D printer, equipped with the latest dual extrusion technology, occupied the overall leading position in education, engineering, design and home/hobby printing..
- X-Pro 3D Printer Kit features conditional breakpoint printing and upgraded 4.3 inch touch screen, Smarter and easier operation.Mute printing..
- Durable and high temperature resistance 6mm aviation grade aluminum build platform, can be heated up to 120℃. Removable curved metal plate make it more convenient to remove the model after printing, which is widely appreciated by users..
- The QIDI TECH 3D Printer with metal platform support rod, which upgraded to 12mm, and also including upgraded parts like motor, main board, and mechanical structure, ensuring more stable printing..
- R QIDI TECHNOLOGY provide free one year warranty..
Check StockCoex Metallic Gunmetal Silver PLA 3D Printer Filament 1 kg Spool 1.75 mm Dimensional Accuracy +/- 0.03 mm
- Great Sample Pack for 3D Pen and 3D Printer: Include 25 Unique Popular Silk Shiny Colors, Each Color 4 Meters Length, Perfectly For Silk PLA Sample....
- 25 Most Popular Silk Shiny Colors: 10 Silk Metal Colors: Silk Bronze, Silk Copper, Silk Silver, Silk Gold, Silk Gun-Metal, Silk Green Gold, Silk....
- Premium Quality, Easy to Print: Widely Compatibility for FDM 3D Printers and 3D Pen, 1.75mm High Diameter Tolerance, No Edge Warping, Consistent....
- 3D Printer Test Printing Tips: Recommend Heat Bed 50-60°C, Recommend Printing Temperature: 215°C, To Avoid being Tangled, Insert Filament into Spool....
- Extra Gift: 2 Silicone Finger Caps, To Protect Your Fingers During 3D Drawing or 3D Printing, It Support You to Make 3D Printing Much More Smoothly....
Check Stock
4 Color 4 Station Screen Printing Machine Screen & Platen Rotating Micro-Registration Screen Printing Press Equipment
- Our 4 Color 4 Station Screen Press can apply 4 screens to 4 stations simultaneously. The the screen layer and the pallet layer can rotate independently, which makes it easier for multi-color printing, material loading and unloading and finally will bring much wider range of applications and faster printing effects..
- They can print onto clothing (especially for T-shirt), woven fabric, metal, paper, copybook, plastic, circuit board, wood, glass, ceramic tile, leather and other plane printing substrates, which is especially suitable for small businesses and individual printing shop. The frame & Pallet can Double Rotate Arbitrarily in 360 Degree. Red Handles on the printer holder are used to Adjustthe Screen Printing Frame and move the printer arm right & left lightly. Production Description.
- Comparing with the original 4 color 4 station printer, this new type machine has a function of micro-adjust/registration.New design metal stand could adjust the height from 28"-35". If you want to do precise color matching, you can use those small red handles to movethe screen frame right or left slightly. It will be a good choice forcolorful printing..
Check StockFlashForge Creator Max Dual Extruder 3D Printer 3D-FFG-CMAX
- Enclosed Printing Chamber - Retain Printing Chamber Temperature.
- Full LED Touch Screen Interface for Easy Operation.
- Build Plate - Provides Flat and Smooth Printing Surface with Use of Industrial Grade Metal.
- Dual Extruder Printing for 2-Color or 2-Material Models.
Check Stock
AMOLEN 3D Printer Filament, Metal PLA Filament 1.75mm with Magnetic, Contains 20% Metal Iron Powder, Apply to Polishing, Matte Black PLA 3D Printing Filament +/- 0.03mm, 1kg/2.2lbs
- 【Metal PLA Filament with Magnetic】 -- High quality 3D Printer Filament with magnetic, special matte black texture, contain 20% Metal Iron powder. This PLA filament is multifunctional with strong magnetic. Ideal for printing all kinds of little parts, screw, screw cap, chain, they can all be attracted by magnets. The matte black finish with magnetic filament is more widely applicable..
- 【Apply to Sanding and Polishing】-- 3D Printer Metal PLA Filament are made of high quality raw materials, high density and tough. The matte finish print will show the different polishing effect by sanding with different grits of sandpaper to get a smooth and shiny print. Good shaping, odorless, no bubble, no jamming, no warping. NOTE: Please pass the filament through the fixed hole to avoid tangles after use..
- 【Multifunctional PLA Filament】-- This Metal Iron Black PLA filament print smoothly and easy to print, with magnetic and suitable for Sanding and Polishing, with heat resistance quality, and corrosion resistance. Extrusion temperature range: 200 - 220℃.
- Printing Bed (Optional)0-50℃；Printing speed: 30-60mm/s..
- 【High Compatibility】-- AMOLEN PLA Filament is Perfectly compatible with most of the FDM 3D Printer, MakerBot, LulzBot, FlashForge, UP, Pri....
Check StockCreality CR-30 3D Printer 3DPrintMill Infinite Z Belt Printer Continuous Belt CoreXY Motion Upgraded 32-bit Silent Board Dual Gear Metal Extruder Cosplay Props Print Farm
- INFINITE-Z-AXIS FOR ENDLESS PRINTING: Equipped with the rolling conveyor belt, it realizes continuous printing. No worries to print the infinite....
- STABLE COREXY STRUCTURE: The stable and sturdy CoreXY precision structure with isosceles right triangle support gives you an extraordinary printing....
- NYLON CONVEYOR BELT: Made of wear-resistant Nylon, the conveyor belt features excellent adhesion to the model. The printed model can fall off....
- DUAL GEARS METAL EXTRUSION MECHANISM: High-quality dual gears metal extrusion, combined with the 45 degrees slanting nozzle realizing constant....
- UNIQUE 45° PRINTING ANGLE: The unique 45 ° angle design offsets the limitations of the vertical nozzle structure. Equipped with a high-performance....
Check StockCreality CR-30 3D Printer with Infinite Z-Axis Printing Creality 3DPrintMill CoreXY 3D Printer with Silent Board Filament Sensor and Dual Gear Metal Extruder
- INFINITE Z-AXIS FOR ENDLESS PRINTING - Equipped with the rolling conveyor belt, the Creality CR30 enables you to print “infinitely” on the Z axis....
- ROLLING CONVEYOR BELT - The wear-resistant conveyor belt on the CR30 features excellent layer adhesion. In addition, prints will fall off....
- STABLE CORE-XY STRUCTURE - The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
- DUAL-GEAR METAL EXTRUDER - High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
- EXCLUSIVE PRINTING SOFTWARE - This Creality 3d printer has its own printing software, Creality Belt, which is specially formulated for unlimited 3D....
Check StockSP-3 Facesheild Corexy Structure Aluminium DIY 3D Printer 220220235mm Printing Size with MKS Mainboard/Power Resume Function/Off-line Print/3.5 inch Touch Color Screen 3D Printer
- Smooth Printing Surface, Accurate And Uniform Extrusion, Rapid Prototyping:TMC2208 256 subdivided motor drive (X.Y axis).
- Stable, High Speed Operation, Silent Printing: Profile and sheet metal combined with all-metal body, hot bed platform leveling (optional 3 or 4....
- Break Detection and Power off Continuous Printing: Automatically detect the feeding condition, automatically pause printing after the material is cut....
- Touch Color Screen: 3.5 Inch large size touch screen: support multi-language (Chinese, English, French and Italian) interface operation.
- What You Get: TWO TREES 3D Printer, 0.2 KG Filament (random color)TF Card includes (installation manual, accessory details, cura software package), 1....
Check Stock
ANYCUBIC Kobra Plus 3D Printer Auto Leveling and ANYCUBIC PLA 3D Printer Filament (Red) Bundle
- ANYCUBIC PLA 3D Printer Filament, 3D Printing PLA Filament 1.75mm Dimensional Accuracy +/- 0.02mm, 1KG Spool (2.2 lbs), Red.
- Smart & Precise 3D Printer Auto Leveling: Anycubic Kobra Plus adopts Anycubic LeviQ new auto-leveling system with 25-point precise leveling up, making leveling and printing accessible in one touch. Easy control for a more intelligent printing experience..
- Filament Run out Detection & Power off Resume: Equipped with filament & power detection sensor, Anycubic Kobra Plus can pause the printing process intelligently if you encounter the situation of running out of filament or unexpected power failure. It can resume printing from the last printing position, which can save your time and reduce wasting..
- Large Build Volume & Fine Printing: The printing build volume of Anycubic Kobra Plus is 2.5 times larger than Anycubic Mega S. 300*300*350mm printing size to satisfy all your 3D printing needs. Equipped with Double thread Z-axis moving construction. Anycubic Kobra Plus can minimize the shaking, ensurig more model details can be restored. It is also the cornerstone to ensure high printing speed..
- Component Upgrades to Achieve Creative Freedom: Equipped with an all-metal geared extruder, which heats up and melts the filaments quickly, ensu....
Check StockCreality CR-30 3D Printer with Infinite Z-Axis Printing Creality 3DPrintMill with Upgraded Silent Motherboard Stable CoreXY Structure Filament Sensor and Dual Gear Metal Extruder
- Infinite-Z-axis for Endless Printing：Equipped with the rolling conveyor belt, the CR-30 enables you to print “infinitely” on the Z axis for....
- Rolling Conveyor Belt: The wear-resistant conveyor belt on the CR-30 features excellent layer adhesion. In addition, prints will fall off....
- Stable Core-XY Structure: The stable and sturdy Core-XY precision structure with isosceles right triangle support gives you an extraordinary printing....
- Dual-gear Metal Extruder: High-quality dual-gear metal extruder, provides better grip and filament pushing force, allows for large filament spools,....
- Exclusive Printing Software：Creality 3DPrintMill FDM 3d printer has its own printing software, Creality Belt, which is specially formulated for....
Check StockSublimation Silicone Mug Wraps for 15OZ Mugs, 3D Rubber Mug Clamps (4PCS)
- Main Material: Heat-resistant silicon and metal.
- Used for: 3D 15oz mugs sublimation printing.
- Heat-resistant silicon with metal clamps. The cup clamp fixture is high temperature resistant and elastic.
- Easy to install and Good stability when printing, it's the best clamp and DIY tool for sublimation transfer..
Check Stock
