Reviews Metal Machining Products

Zouzmin Carbide Insert APGT1135PDFR-G2 Milling Insert for Aluminum Alloy (APGT1135PDFR-G2)

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

SpeTool 12501 2 Flutes Carbide CNC End Mill For Aluminum (1/4 Shank, 2.5 inch Long) Router Bit Spiral Mill

  • Solid Carbide Spiral Router Bit with 1/4 inch Shank and 1/4 inch Cutting Diameter, 3/4 inch Cutting Length, 2-1/2 inch for Total Length.
  • The EndMill With Flat Top, 2-Flutes, Large Chip Pocket, Easy Chip Removal..
  • For Aluminum, Non-ferrous Metal, Plastics, Plywood, OAK, MDF, and Any Hardwood Working and Long service life for sharp.
  • The Route Bit Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
  • End Mill Bits are Suitable for Slot Machining, Side Face Machining, Hole Machining. Please Adjust the Speed, Feed and Cutting Depth According to Actual Cutting Conditions..
Check Stock

60W Mini Rotating Lathe,12000RPM Metal Rotating Lathe,Mini Lathe Machine Lathe Machine Tools,for Wood Metal Glass Plastic Machining

  • ?¡¾PRODUCT PARAMETER¡¿ ?Motor Speed: 12000rpm ? Input Voltage/Current/Power: 12V DC/5A/60W ?Axis X travel: 32mm.
  • Axis Z travel: 145mm ?Max Diameter of Machined Material: 100mm ? Machining Accuracy: 0.05mm..
  • ?¡¾MAIN PARTS¡¿ Headstock, tailstock, long machine bed, big slider, small slider, motor blade, gear, connection block, belt cover etc. All of the parts are made of metal except belt cover..
  • ?¡¾GOOD PERFORMANCE¡¿Maximum motor power is 60W by using more powerful motor.With 0.02mm accuracy of scale lines, the hand wheel increases the precision of workpiece machining..
  • ?¡¾POWERFUL FUNCTIONS¡¿Motor case and headstock are jointed. Axis Z slider can spin 180¡ã.Center height is 75mm and distance between centers is 135mm, motor speed normally drops to 2000rpm when using the lathe to machine metal..
  • ?¡¾USE RANGE¡¿ Lathe tool is made of high speed steel material, which can machine soft metal, nonferrous metal and precious metal..
Check Stock

Carbide Rough Milling Insert Carbide Inserts for Steel, Stainless Iron and Cast Iron PVD (AlTiN) Coating Carbide Milling Insert/Carbide Inserts APMT1604PDER-H2 APKT1604 for BAP400R Milling Holder

  • Machining: Copper And Aluminum Medium Finish Machining.
  • Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..
Check Stock

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

Accusize Industrial Tools 2 Pc of Each Kind of Carbide Inserts for 2387-2003, CVD Coated and Tin Coated, Total 10 Pieces, 2387-2003inserts

  • Replacement Inserts for Turning Tool Set 2387-2003.
  • TiN Coated Surface Lasting Longer in Metal Machining.
  • Cannot be Used for Aluminum and Stainless Steel Machining.
  • External Threading 11ER, MGMN200, WCMT2.52, CCMT21.51, and DCMT21.51..
Check Stock

Accusize Industrial Tools 2 Pc of Each Kind of Carbide Inserts for 2387-2004, CVD Coated and Tin Coated, Total 10 Pieces, 2387-2004inserts

  • Replacement Inserts for Turning Tool Set 2387-2004.
  • TiN Coated Surface Lasting Longer in Metal Machining.
  • Cannot be Used for Aluminum and Stainless Steel Machining.
  • External Threading 11ER, MGMN200, WCMT2.52, CCMT21.51, and DCMT21.51..
Check Stock

Acratech GXP Ball Head w/ Knob Clamp

  • 【Low Profile More Stable】The ball head is designed with a low center of gravity, CNC machining, 44MM large ball diameter, making it extremely....
  • 【Excellent Quality】The low profile ball head adopts all-metal structure, 0.1MM machining tolerance, anodic anodized, ultra-high-strength aviation....
  • 【Excellent Design】Double grooves and lightweight design. The maximum load-bearing capacity of this low profile ball head camera mount is 44....
  • 【Precision Adjustment】4 * 90 degrees, 5 degrees per scale, and double spirit bubbles to meet the needs of accurate photography and Panoramic....
  • 【Widely Applicable】3/8"screw holes at the bottom of the ball head and easy to install tripod, monopod, camera slider and mini tripod. With 1/4"....
Check Stock

Tihebeyan Metal Fishing Rod Seat Set, Fisher DIY Reel Seat Base Fishing Tackle Accessory

  • [Purpose] — Designed for DIY fishing rod handle accessory, necessary item for anglers.
  • [Environmental Friendly Material] — The fishing rod seat is made of quality metal, high strength, heavy duty, anti-rust and durable.
  • [High Quality Machining] — Fine machining ensures precise mounting thread and perfect fit to your fishing rod.
  • [Lightweight] —The fishing accessory will not add much too burden to your rod, makes your fishing more labor-saving and comfortable.
  • [with Necessary Fitting]— With necessary fittings, it is easy to install and use.
Check Stock

Machining and Grinding Fluid | Fusion Cool 2240 | General Purpose Coolant for Cutting and Grinding Machine Shop Operations | Semisynthetic 1 Gallon

  • Fusion Cool 2240 is a top cutting oil for drilling metal. This cutting fluid product is perfect for machining of many kinds of metals. Works well for grinding, milling, CNC machining, tapping, turning..
  • Works well for bandsaw cutting, drilling, tap and die, drill bit cutting, worm drive saw, and many more cutting applications..
  • Superior sump life with ultra-low odor and mist. Direct Cross-Over / Replacement for Trim SC 520.
  • Environmental friendly, recyclable coolant.
Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

  • Machining Range: precision machining, rough machining, plane processing and step processing..
  • High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
  • Made of cemented carbide, which has high hardness with good impact resistance..
  • New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..
Check Stock

Flap Disc grinding wheel sanding discs 25 Pack 4.0

  • 25 pieces T27 aluminum wheel with high lead oxide alumina, 4.0 inch x 5 / 8 inch, 25 pieces of 60 grain size. It can be used for edge machining and profile application, providing a grinding angle of 10-15 degrees, can be used for edge machining or profiling application, and can effectively absorb vibration without generating stains, thus bringing more stable and effective..
  • High-Performance Bevel T27 Wheel high-density and high-quality zirconia is produced to make it compatible for grinding, with the maximum speed of 13, 000 RPM..
  • Safety made of alumina abrasives and zirconia alumina materials, it has longer service life than the standard alumina abrasives. It has a good heat dissipation, low noise, higher toughness and abrasive resistance, and it is specially designed for stronger and more economical grinding wheels..
  • Application Rust protection, Paint, nonferrous metals, chamfer, mixing by welding, stainless steel and nonferrous metals, cleaning and finishing, polishing, wood and plastic, the perfect products can meet your needs..
  • Thanks for buying]if you have any questions about our products, please send us email. We are 100 percent to help you with your purchase. If you have any questions, please feel free to contact us..
Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

  • 【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
  • Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
  • For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
  • 【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
  • 【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
  • 【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..
Check Stock