Reviews Metal Injection Mould

0.38 Pens Fine Point Smooth Writing Pens Ultra Fine Retractable Pens,Black Permanent Ink,0.38mm Tip Ultra Fine Gel pen

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel....
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel....
  • Ink – High-Quality Black Permanent Inks From "Mikuni "are Waterproof and Sun-proof, and can be archived permanently..
  • Tip - 0.38mm Ultra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten....
Check Stock

2xhome Set of 2 Clear Louis Ghost Dining Armchairs Polycarbonate Designer Acrylic Transparent Crystal Chair with Arms Glass Modern Mid Century Victorian See Through for Desk Kitchen

  • Due to the glossy finish the clear chair, you will notice some swirls. Single injection molding will have molding line and injection point at some spots. They are not defected. Also blue/purple hue appears on the chair but will fade out over time..
  • Made from one single mould from crystal clear polycarbonate (stronger than acrylic).
  • Stackable, Scratch Resistant, and UV Protected.
  • Suitable for commercial and residential indoor & outdoor use.
Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

  • 【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
  • Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
  • 【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
  • 【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
  • They have the characteristics of small size and high precision.
  • 【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
  • 【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.
Check Stock

2 Pieces Graphite Ingot Mould Crucible Mould for Casting Gold Silver Metal Aluminum Copper Brass Melting Refining (4 x 2 x 1 Inch)

  • Reliable material: main material is graphite, the ash content is less than 0.1 percent, ensuring that the metal purity will not be affected during metal refining.
  • Rapid cold and hot use conditions, with nice thermal stability.
  • Nice characteristics: it has nice thermal conductivity, which can greatly shorten the melting time and save energy, and withstand 2000 degrees Celsius, nice acid and alkali resistance, nice corrosion resistance, impact resistance, 89 MPA compression resistance, and 48.7 MPa flex resistance.
  • Widely applicable: the mould can be applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and so on.
  • Considering the size of this product, it is more suitable for small-capacity metal melting.
  • Ingot mould size: 1KG graphite ingot mould outer is 100 x 50 x 25 mm/ 4 x 2 x 1 inch, inner is 90 x 40 x 20 mm/ 3.54 x 1.6 x 0.8 inch.
  • 2KG graphite ingot mould outer is 100 x 60 x 40 mm/ 3.93 x 2.36 x 1.57 inch, inner is 85 x 45 x 30 mm/ 3.35 x 1.77 x 1.18 inch, melting and casting metals like gold, silver, brass, aluminum, copper, zinc, plumbum, and more.
  • The capacity is an approximate volume is 1 kg hold or 500g silver.
  • What you receive: there are 2 pieces of graphite ingot moulds in this package include 2 di....
Check Stock

4 Pieces Graphite Ingot Mould Crucible Ingot Casting Mould Silver 1 KG Gold Ingot Mould for Gold Silver Metal Aluminum Copper Brass Melting Casting Refining (90 x 40 x 20 mm)

  • Package comes with: you will receive 4 pieces of graphite ingot moulds in the package, the sufficient quantities for you can meet your DIY requirements in daily life.
  • Quality material: our casting ingot crucible moulds are mainly made of graphite material, almost no ash content to ensure that the metal refining process does not affect the purity of the metal, which are durable, sturdy, reliable and reusable, not easy to break or deform, you can use them for a long time.
  • Size detail: the outside dimension of our silver gold ingot mould is approx. 100 x 50 x 25 mm/ 3.94 x 1.97 x 0.98 inch and the inner size is approx. 90 x 40 x 20 mm/ 3.54 x 1.57 x 0.79 inch, and the capacity is about 1 kg gold or 500 g silver, proper size can meet your daily needs.
  • Good performance: our ingot crucible mould has good thermal conductivity, which can greatly shorten the melting time and save energy, and can withstand a temperature of 2000 degrees Celsius, good acid and impact resistance, good alkali resistance and corrosion resistance, 89 MPA compressive strength and 48.7 MPa flex resistance.
  • Various applications: this graphite casting mould has a wide range of applications, it is suitable for experiments and melting of non-ferrous metals, such as gold, silver, metal, alumin....
Check Stock

XIZE SH Black Ink Pens Waterproof No Smudge Pen for Writing Cool Pens,Fine Tip 0.5mm,12-Count 3345

  • Grip - A:Doubled Injection Mould Process,The Two Parts of the Pen Grip and Pen Barrel are Injection Molded at the Same Time. B:The New Silica Gel Material is Softer and Feels Better.After a Long Period of Storage and Use, It Can Always Refuse Hollowing and Slipping..
  • Ink – Dynamic Gel Ink Formula that's Mikuni(R) High Quality Ink for Quick-Drying and Colorfast Writing..
  • Tip - 0.5mm Extra Fine Point, High-Precision Pen Tip, Production by Swiss MIKRON Machine Tool, Craftsmanship Comparable to a Swiss Watch, Tungsten Carbide Pen Ball, Wear-Resistant, Corrosion-Resistant, and More Suitable for Long-Term Writing..
  • Barrel - Octagonal Pen Barrel :Improved the Force-Bearing Surface in Contact with the Finger & Pressure and Drop Resistance of the Pen Barrel Itself,Thereby Improving the Actual Sense of Use..
  • Pack - Includes 5 black gel ink pens. Box Size:5.82*2.28*0.75 Inch(148*58*19mm).
Check Stock

7 Pieces Graphite Torch Melting Casting Kit, Including 2 Graphite Crucible Stir Stick, Graphite Casting Mould 5-in-1 Graphite Casting Ingot Mould, Quartz Crucible, Cylindrical Graphite, Tong for Melt

  • ... pieces graphite torch melting casting kit includes 2 pieces graphite stir rod sticks, 1 piece graphite casting mould, 1 piece 5-in-1 graphite ingot mould, 1 piece quartz crucible, 1 piece cylindrical graphite and 1 piece tong, will be a convenient combination to meet your DIY needs for melting, casting or refining metal, jewelry, gold, silver and other materials.
  • Nice features: these graphite casting moulds possess many nice features, are characterized by nice thermal stability, as well as fast cooling, their nice thermal conductivity properties can shorten the casting time and save energy.
  • Dimension: crucible mould measures approx. 100 x 50 x 25 mm in outer diameter, 90 x 40 x 20 mm in inner diameter, each crucible stir rod is about 12 inches/ 30 cm long, 5-in-1 graphite casting ingot mould about 72 x 57 x 12 mm in outer diameter, quartz crucible approx. 7 cm in diameter, 2.5 cm in height, tong about 10 inch in length, cylindrical graphite measures approx. 4 cm in diameter, 4 cm in height.
  • Multipurpose: these graphite ingot moulds are widely and commonly applied for experiments and smelting of non-ferrous metals, such as gold, silver, copper, aluminum, and much more, also ideal for satisfying lab, test analysis and other purposes.
Check Stock

BeswinVR Halo Strap for Oculus Quest 2 and Original Quest- Virtual Reality Accessories- White Color

  • 【Latest Adapter】Design for Quest 2, Quick install without D.I.Y spacer. The new adapter tighten fit with Quest 2 well..
  • 【Latest Version】2020 ergonomic Designed head strap for Oculus Quest, No squeeze on face and nose, 50: 50 Balance weight between Oculus quest....
  • 【Comfort and Convenience】Easy-to-use size adjustment dial and hard-sided construction, 99% comfortable like HTC Vive Audio strap..
  • 【Packing List】1x Halo Strap, 2x PU leather pad, 1x head top belt..
  • 【Duability】100% injection mould made, No any 3D print, duable and long-life use at home, VR arcade and VR parks..
Check Stock

Geekpure 10 Inch Reverse Osmosis RO Filter Housing -1/4 Port-Fit for 2.5 x10 Filters

  • Replacement housing for Geekpure RO system,Widely used in RO system or pre-filtration.
  • Fit with most RO systems using standard 10" filters.But different brand,the injection mould is totally different,NOTE:PLEASE REPLACE HEAD AND HOUSING BODY TOGETHER.
  • INLET-OUTLET-1/4" female threaded in and out fittings.matched quick fitting ASIN:B078VQN6TZ.
  • SIMPLE INSTALLATION-Easy to replace.Food grade polypropylene will not cause pollution to water.
  • Pack of 7. 1 x Filter housing , 2 x O rings ,1 x wrench,2 x fittings,1 set screws.
Check Stock

4 Pieces Graphite Ingot Mold Stir Rod Stick Set, 5-in-1 Graphite Casting Ingot Mold Coin Combo Metal Refining Scrap Mold, 1 KG Graphite Ingot Crucible Mould, 2 Graphite Stir Rod Stick for Melting

  • "What you get: this package includes 1 piece of 5-in-1 graphite casting ingot mold, 1 piece of 1 kg graphite ingot crucible mould, and 2 pieces of graphite stir rod sticks, totally 4 pieces in 1 package, convenient combination set to meet your DIY needs for melting casting refining metal jewelry gold silver".
  • "Size information: the 5-in-1 metal refining scrap mold measures about 72 x 57 x 12 mm, and the 1 kg crucible mould is 100 x 50 x 25 mm in outer diameter, and 90 x 40 x 20 mm in inner diameter.
  • Each crucible stir rod is about 12 inches/ 30 cm long, and 5/16 inch/ 0.8 cm in diameter, please check these sizes carefully before purchasing".
  • "Wide range of applications: these graphite ingot molds are suitable for experiments and smelting of non-ferrous metals, including gold, silver, copper, aluminum, and so on, which are designed for lab, test analysis and other purposes.
  • Considering the product size, it is more suitable for small-capacity metal melting projects".
  • "Product advantages: these graphite casting molds are featured with nice thermal stability and corrosion resistance to strong acid and alkali, fast cooling, nice thermal conductivity properties can highly shorten the casting time and save energy".
  • "Nice material: these melting casting molds ar....
Check Stock

Casting Melting Ingot Mold, Reversible Jewelry Ingot Mould Oil Groove Mold Making Tools for Sheet Bar Gold Silver Casting Melting Casting Metal Tool for Sheet Bar Gold Silver Casting

  • Metal Ingot Mould Perfect for making ingot from scrap gold and silver..
  • It is reversible, so it can be used on making bar and sheet. Make your own size bars etc, highly useful for rolling sheet/wire on a rolling mill..
  • Four kinds of bar's diameter can be made - 8mm, 6mm, 5mm, 4mm. And depth of the mould is 61mm, so the height of bar is about 60mm..
  • Wooded handle for easy hold. The clamp is included. It is detachable, easier for you to check and clean..
  • This mold package list 1 * Jewelry Ingot Mould, Size: Approx. 20 * 8 * 8cm / 7.87 * 3.15 * 3.15inch, Weight: 1375g.
Check Stock