Reviews Metal Fabrication Parts

TRIL GEAR 60 Gallon Bench Top Sandblaster Cabinet Air Sand Blaster 65-160PSI Blasting Red w/Sandblast Gun Steel Red Portable

  • Can be used for surface finishing, preparation, and modification on a variety of materials including prepping metal parts for paint, removing paint and other surface contaminants.
  • Perfect addition for any home shop or garage or for use in professional settings such as automotive shops, fabrication, and restoration applications.
  • Average Air Consumption: 270 liter/min @ 6 bar；Air Inlet: 1/4″NPT.
  • Working Area: (33 x 21.65 x 14.56)" / (83.82 x 54.99 x 36.98)cm (L x W x H)；Dust Port: 63 mm.
  • 【Package Includes】1 x 60 Gallon Sandblaster Cabinet.
Check Stock

Nike Unisex Nike Legacy91 Tech Hat, Game Royal/Anthracite/White, Misc

  • Dri-fit fabrication wicks perspiration away from the skin for increased evaporation rate.
  • Back strap metal buckle closure to adjust your fit.
Check Stock

Nike Unisex Nike Legacy91 Tech Hat, College Navy/Anthracite/White, Misc

  • Dri-fit fabrication wicks perspiration away from the skin for increased evaporation rate.
  • Back strap metal buckle closure to adjust your fit.
Check Stock

DS Safety Waterproof Work Gloves Hycool Grip Working Gloves 1 Pair(L,Blue)

  • ...humb coating. Double layered latex can effectively prevent cold air and water penetration, suitable for low temperature, damp environment, outdoor or cold store.
  • - MULTI-PURPOSE: Suitable for all kinds of outdoor work under hot or wet environments. General for light metal fabrication, handling small oily parts and components, painting and horticulture, micro engineering, handling small castings, parts assembling, other automotive application, general handling work and so on.
  • - WARRANTY: We specialized in all kinds of gloves, products sold all over the world. We serve every customer carefully. If for any reason you are not 100% satisfied with this product, please contact us. DS Safety Customer Service Team will immediately refund your purchase price or offer replacement..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 10 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

Simple Welding Rods USA Made - From Simple Solution Now - Aluminum Brazing/Welding Rods - Make Your Repair Stronger Than The Parent Metal Every Time - 20 Rods

  • Superior Performance - Much lower working temperature than the vast majority of comparable products (728 deg F / 387 deg C) lets you repair & fabricate a far greater range of aluminum and other non-ferrous metal parts. It's never been easier..
  • Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily..
  • Dependable - Make clean joints with no slag enables you to create a strong quality finish on all projects just like the pros do. No-Nonsense, 39,000 psi tensile strength & 60,000 - 75,000 psi compression strength delivers the key to make your repair or fabrication stronger than the parent metal every time - Fast..
  • No Flux - Works with aluminum, aluminum alloy, die-cast, bronze, nickel, titanium, zinc, copper, brass & most non-ferrous (non-magnetic) metals (does not work with steel except for galvanized steel) lets you apply quickly & easily with any handheld torch – Oxyacetylene, Mapp, Map/Pro or Propane like the best metalwork enthusiasts do..
  • Usa Made - Simple Welding Rods are for every metalwork enthusiast who needs to repair or fabricate non-ferrous metal, but can't find a simple solution using just a handheld torch..
Check Stock

8 Pieces Wire Brush Drill Bore Cleaning Brush Set with 1/4 Inch Hex Shank Stainless Steel Wire Twisted Brush for Drill Impact Driver, 8 Sizes

  • ...also suitable for cleaning steel parts, machinery, the unfinished metal parts, paint stains, corrosion without damaging surfaces or fine features.
  • Suitable occasions: these wire bore brushes can be applied in your car, garage, office and kitchen, nice for cleaning, polishing, painting, or rust removal in automotive, fabrication, machining and smiting applications and more.
Check Stock

TCI Precision Metals 6061 Aluminum Sheets and Plates Precision Ground Flat and Milled .250' X 12.000' X 18.000' Thick

  • MACHINE-READY BLANKS – Our Standard Sized Machine-Ready Blanks are available in a wide range of pre-configured sizes. Parts are clean and prepped, ready for final machining..
  • GROUND AND MILLED – We do all the hard work so you don't have to. The 6-side line aluminum sheets and plates are precision ground on 2-sides (thickness) to +/-.002” and milled on the length and width to +/-.002”..
  • REDUCES PREP TIME – Aluminum plates arrive clean and ready to go from receiving to machining without prep time. Reduces setup time, scrap, and overall cycle time..
  • VERY VERSATILE – 6061 Aluminum metal plates are very versatile. Can be used in a wide variety of fabrication projects due to its machinability, bending, weldability, and corrosion resistance..
  • PRECISION IS IN OUR NAME – Our blanks are made flat and parallel (as close as .002″) and tighter, and designed to stay that way..
Check Stock

Angle Gauge, eOUTIL Digital Protractor/Inclinometer/Angle Finder with V-Groove Magnetic Base - Precision Level Box for Automobile, Woodworking, Building, Drilling Machinery, Masonry (Blue)

  • HIGH-ACCURACY -- Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°..
  • displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. Great for roofs, rails, ADA ramps.
  • JOBSITE TOUGH -- Sturdy solid I-beam aluminum frame, Neodymium magnets, rubber end caps and IP54 dust/water splash resistant protection for harsh working environments.
  • DUAL FUNCTIONALITY With STRONG NEODYMIUM MAGNETS -- As a true (absolute) digital level and electronic inclinometer / protractor lets you set or check relative angles between surfaces. Plus, magnetic base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
  • LARGE, BRIGHT GREEN LED DISPLAY With AUDIO INDICATOR -- This level features a large, bright LED display that flips, so you can easily read your measurements all day and night – even in the darkest spaces. What's more, we craft our digital level with audio indicator functionality, so you can achieve level and 90 degrees even with your eyes closed.
  • V-GROOVE MAGNETIC BASE -- Magnetic v-groove base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication.
Check Stock

10-Inch Digital Torpedo Level and Protractor | Neodymium Magnets | Bright LED Display | V-GROOVE MAGNETIC BASE | IP54 Dust/Water Resistant smart level with Carrying Bag

  • HIGH-ACCURACY -- Accurate to the ±0.1° at 0° and 90° and ±0.2° from 1-89°..
  • displays angle and bevel readings in degrees, pitch IN/FT, mm/M, and percent slope. Great for roofs, rails, ADA ramps.
  • JOBSITE TOUGH -- Sturdy solid I-beam aluminum frame, Neodymium magnets, rubber end caps and IP54 dust/water splash resistant protection for harsh working environments.
  • DUAL FUNCTIONALITY With STRONG NEODYMIUM MAGNETS -- As a true (absolute) digital level and electronic inclinometer / protractor lets you set or check relative angles between surfaces. Plus, magnetic base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication and more.
  • LARGE, BRIGHT GREEN LED DISPLAY With AUDIO INDICATOR -- This level features a large, bright LED display that flips, so you can easily read your measurements all day and night – even in the darkest spaces. What's more, we craft our digital level with audio indicator functionality, so you can achieve level and 90 degrees even with your eyes closed.
  • V-GROOVE MAGNETIC BASE -- Magnetic v-groove base firmly attach to ferrous metal surfaces like conduit, pipe, steel construction framing, metal fabrication.
Check Stock

DS Safety L6201 Waterproof Work Gloves 15 Gauge Hycool Grip Men's Working Gloves Double Coated Nylon Gloves with Comfortable Latex Foam for Multipurpose Use 1 Pair(M)

  • ...ating. Second is fully with latex palm and thumb coating. Double layered latex can effectively prevent cold air and water penetration, suitable for low temperature, damp environment, outdoor or cold store.
  • - MULTI-PURPOSE: Suitable for all kinds of outdoor work under hot or wet environments. General for light metal fabrication, handling small oily parts and components, painting and horticulture, micro engineering, handling small castings, parts assembling, other automotive application, general handling work and so on.
  • - WARRANTY: We specialized in all kinds of gloves, products sold all over the world. We serve every customer carefully. If for any reason you are not 100% satisfied with this product, please contact us. DS Safety Customer Service Team will immediately refund your purchase price or offer replacement..
Check Stock

LUTER 12 Sets 15mm Snap Buttons Fastener Kit No Sew Removable Metal Heavy Duty Snap Buttons with 4 Metal Install Tools for Denim Clothing Jeans Pants Leather Bags Jackets Black

  • Package Content: You will receive 12 sets 15mm/0.59inch snap buttons, 4pcs installation tools and 1pc plastic box to store the above things..
  • Snap Buttons Kit: Each set of snap buttons consists of 4 parts: cap, socket, stud and column. The diameter button cap is 15mm/0.59inch. The kit is....
  • Premium Material: These snap buttons are made of prime quality alloy metal, adopted advanced plating process and high-quality fabrication process,....
  • Wide Application: You not only can use the snap buttions kit in your clothing, bags, leather belts, caps, decorations and other items requring snap....
  • Warm Tips: The kit possess 4pcs installation tools which is very helpful for your installation and DIY creation. So please pay attention to avoid....
Check Stock

Vgo 3Pairs High Dexterity Light Duty Mechanic Glove, Rigger Glove, Anti-abrasion, Touchscreen(Size XL, Black, SL8853)

  • Ideal for regular construction, logistic, mIdeal for regular construction, logistic, metal fabrication, warehousing, landscaping/gardening, hand tools, and DIY light duty worksetal fabrication, warehousing, landscaping/gardening, hand tools, and DIY light duty works.
  • Synthetic leather palm offers long-lasting durability and all-day-long comfort.
  • Touchscreen compatible design on thumb and index fingertips for smartphone control.
  • Stretch spandex back provides exceptionally dexterity and breathability.
  • Three-dimensional hand modeling conform to ergonomics for a great fit.
  • CA65 approved / Comply with the REACH regulation, Machine washable.
Check Stock