Reviews Metal Cut off Wheel

Dynabrade 52420 3-Inch 7-Degree Offset Cut-Off Wheel Tool

  • Cut-Off Wheel Tool, for efficient cutting of sheet metal, frame rails, clamps, bolts, etc.
  • 3-Inch Diameter, 7 Degrees Offset, 5 hp, 20,000 RPM, Front Exhaust.
  • Accepts optional 3-Inch diameter Type 1 Cut-Off Wheels.
  • Cut-off Wheel Tool, For Efficient Cutting Of Sheet Metal.
  • 3-inch Diameter, 7 Degrees Offset, 5 Hip.
  • Accepts Optional 3-inch Diameter Type 1 Cut-off Wheels.
Check Stock

YON.SOU. Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels, Pneumatic Metal Sheet Cutting Tool, Heavy Duty Air Cutter Cutoff Tool

  • ... easily install or replace cut-off wheel. The pneumatic cutter is made of aluminum housing which is lightweight and durable for you to precisely control the air cutter tool..
  • ⚙️ VARIOUS APPLICATIONS: The high speed pneumatic cutoff tool is designed to cut through sheet metal, plastic pipes, composite material, exhaust systems, straps, hangers, tiles, etc. The metal cutter air tool is suitable for you to use in your DIY project or auto shop..
Check Stock

OKDIAMOND Diamond Cutting Wheel 6 x 7/8 Inch for Metal, Cut Off Wheel with 3000+ Cuts on Rebar, Steel, Iron and INOX, for Angle Grinder-6 inch

  • All in 1 Metal Solution - 4.5 diamond blades for grinder for metal diamond plate cutting wheel，Angle grinder cutting wheel ，Our cut off wheel allows dry cutting of many metal type materials likes tubes&structural、sheet metal、stainless steel、solids、rebar、castings、steel plates、non-ferrous..
  • LONG LIFE - Metal cutting blade according to the test results, OKDIAMOND enables to make more than 3000 cuts. Increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the segment. And our cut wheels have no wear and tear after work , it does not wear down like bonded abrasives.
  • Environmental - When you use our cutting wheel : less sparks, no dust, no smell, no overheating. reducing dust particles for a cleaner work station. It's very comfortable in usage than traditional wheels. It's 100% contaminant-free. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFETY- Wheel breakage eliminated when operating at high rotation speed (13200 RPM) because of special construction of the disc ....
Check Stock

S SATC 4 1/2 Cut Off Wheel 50 PCS Cutting Wheels 4.5 x.040 x7/8 Angle Grinder Cutting Disc Ultra Thin Metal & Stainless Steel

  • ☞LONGEST LASTING: Cut off wheels feature metal center and ultra-thin 0.040" thickness. 50 pieces cutting disc for metal & stainless steel meet ANSI safety requirements. Grinder Wheel Dimensions: 4 1/2"x0.040"x7/8".
  • ☞PERFECT ALUMINUM: 4 1/2 cut off wheel is made with a proprietary combination of alumina particles for aggressive cutting action, providing the industry's best balance of cut life, cut rate, cut accuracy, power requirements and heat build-up, to give you unmatched cut time, consistent precise integrity, moderate power requirements and relatively low heat build-up.
  • ☞FITS ANY ANGLE GRINDER: 50 PCS cut-off wheels for metal & stainless steel fast burr-free cutting feature 4 1/2"x0.040"x7/8" , compatible with Die Grinder, Air Cut Off Tool and Electric Cut Off Tool..
  • ☞MULTIPLE UESES: Cut off wheels 4 1/2 inch are designed for cutting fiberglass, steel, iron, plastic, stainless steel including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel , and other ferrous metals..
  • ☞Attention Please: Cutting disc is made in accordance. Before using these, please wear all applicable safety gear when using these discs (eyes/ears/face/hands/body/etc).
Check Stock

PRETEC Grinding & Cutting Wheels 4 1/2 inch Set,Angle Grinder Wheel Set,Cut Off Wheels 20pcs,Grinding Wheel 3pcs,4.5” Flap Discs 3pcs for Angle Grinder for Cutting Grinding

  • 【Grinding Wheel Set】4-1/2 inch angle grinder wheel set consisted with 3 kinds of grinder discs: 20 pcs cutting wheel,3 pcs grinding wheel,3 pcs 80 Grid flap disc.Also with a sturdy carrying case for holding 4.5”cut off wheel for metal..
  • 【Cutting Wheel】20PCS cut off wheels 4 1/2 inch has passed the CE&ISO certification, built for a more robust and safety cut off wheels.Fast burr free cutting with minimal material loss, Will not splash and cause injury..
  • 【Grinding Wheel:】3 pcs premium 4-1/2 “* 1/4 “* 7/8 “Grinding Disc for metal and stainless steel, T27 bevel type, A24T Aluminum Oxide Grains for Aggressive Grinding and High Stock Removal. Operating up to 13,000 RPM and 80M/S. Meet almost all your general polishing requirements..
  • 【Flap Disc: 】3 pcs flap discs, Constructed of industrial grade premium zirconia. Durable,good abrasion resistance,and anti-clogging.4.5″ * 7/8 inch arbor size flap disc is compatible with most air and electric angle grinders..
  • 【Long Lasting Discs】Our disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
Check Stock

BRSCHNITT Diamond Cut Off Wheel,3 Inch x 3/8 Inch Arbor Vacuum Brazed Diamond Saw Blades for Metal Steel Tube Iron Rebar Cutting Wheel 75mm

  • ✔Size --1pc Diameter 3 inch (75mm) ,segment thickness 1.5mm ,Arbor 3/8 inch /10mm.
  • ✔Metal cutting disc works well to cut all kinds of metal, including bolts, iron, rebar, metal profiles, aluminium, different types of pipes and another sheet metals with over 100X longer life than bonded cut off wheels in metal cutting applications.
  • ✔Diamond cutoff wheel delivers 3,000+ more cuts for metal with much lower cost per cut compared to bonded cut-off wheels.
  • ✔No dust and less spark when cutting, healthy for operater and less pollution,Much safer than abrasive cut-off wheel, no risk of break of disc.
  • ✔Machine:Angle grinder with 10 mm socket.
Check Stock

GRAFF Black Cut Off Wheels 4 1/2 Inch - Diamond Metal Cutting Disc for Angle Grinder 4.5 Inch - 60x Longer Wheel Life

  • UNIVERSAL - Our cut off wheel has a CONSTANT DIAMETER that allows dry cutting of metal, rebar, iron, metal profiles, aluminium, different types of pipes and other sheet metals..
  • LONG LIFE - According to the test results, GRAFF BLACK enables us to make more than 5000 cuts. The increased lifetime of this cut off wheel is ensured by high-temperature plasma soldering and a new generation of diamond grit in the cutting segment..
  • CONVENIENT IN OPERATION - Our cutting wheel is more comfortable in usage than any abrasive wheel: fewer sparks, no dust, no smell, no overheating. The diamond cutting wheel can be used for grinding burred edges that can leave after rough metal cutting..
  • SAFE WORK - Due to the special construction of the disc body made of high-strength steel, disc rupture is excluded when operating at a high rotation speed (13 200 RPM)..
  • CERTIFIED - Our metal cutting wheel was certified by MPA Hannover..
Check Stock

101PCS Power Rotary Tool Cutting Wheels, Resin Cutting Discs 1/8inch Mandrel Fiberglass Reinforced Cut Off Wheel

  • 101pcs Fiberglass Reinforced Cut Off Wheel with 1 Mandrels Included (1/8 inch Shaft Fits Standard Rotary).
  • This is a cut-off disc - only cuts along its edge. Ideal for cutting, grooving and cutting all kinds of metal and fine wood, plastics and ceramics.
  • With low heat generation and thin cutting line, the cut off wheels are applicable to electric drills, hanging grinders, electric grinders, etc..
  • Keep a light touch, as the wheel will break under a lot of pressure.
  • They can be used to cut metal, plastic, chassis modification, thin metal circuit board and DIY production after connected with mandrels, and are ideal for olive cutting..
Check Stock

Two Hole Pins, 1/2 in - 1 15/16 in, Large Threaded (2 Pack)

  • 32Pcs Rotary tool mini cutting discs sets include 6pcs 22/ 25/ 32/ 35/ 44/ 50/mm woodworking thin cutting wheel +10pcs black mesh 32mm resin cutting wheel +10pcs 22mm emery cutting wheel +30pcs 22mm red polishing wheel + 1pc 1/8" connecting rod + 1pc 1/4 "connecting rod + 4pc 3mm connecting rod.
  • Mini saw blades made of high-hardness steel, hard texture, wear-resistant and heat-resistant, surface-plated emery, fine and uniform particles, rotary tool cutting disc can be used to polish or cut the surface of objects, high cutting efficiency and durability.003cbr/003e.
  • Rotary cut-off wheel kit has 6 assorted cutting discs set for different needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal..
  • The cut-off wheels set + is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming.003cbr/003e.
  • Compatibility: Shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools.003cbr/003e.
Check Stock

Cut Off Wheels and 1 Mandrel Kit, 20Pcs 3” x 1/16” x 3/8” Thin Cutting Discs with 1 Mandrel for Die Grinder

  • 【Material】The cutting wheel is made of Proprietary aluminum oxide grain combination ensures durable long wheel life and fast bur-free cutting.
  • The mandrel is made of A3 carbon steel with black plating, durable..
  • 【Function】The ultra-thin cutting wheel can achieve precise and fast cutting, while reducing burrs and material waste, minimal burrs and material waste. 3/8" & 1/4'' Mandrel are designed to fit mini cut-off wheels..
  • Perfect for General Purpose metalworking: Stainless Steel, Sheet Metal, Ferrous & Non-ferrous Metal, Cast Iron, Angle Iron, Rebar, Aluminium and Copper Cutting..
  • 【Fit for Tools】The Cut-off wheel mandrel with 1/4” Shaft, for most die grinder, air tools and drill rotary tools. Pay attention to connector size, easy to mount and demount. It's a great essential die grinder accessory..
  • 【Package】20pcs 3-inch Cut-Off Wheels + 1pc Adaptor kit.
Check Stock

Makita 10 Pack - 4 Inch Cut Off Wheels For 4' Grinders - Aggressive Cutting For Metal & Stainless Steel

  • ✅ 10 MAKITA Premium 4” Flat Type 1 Cut Off Wheels for Metal & Stainless Steel (INOX) | Wheel Dimensions: 4-Inch x .045-Inch x 5/8-Inch | Optimized for Makita 4 Inch Angle Grinders and compatible with All 4” Angle Grinders.
  • ✅ CUT 2-3X More than lower quality or excessively thin wheels due to this wheel’s Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup.
  • ✅ QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita’s High-performance aluminum oxide grain and proprietary hard bond matrix.
  • ✅ AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita’s proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, ....
Check Stock

YON.SOU Air Cut Off Tool with 2 pcs 3-inch Die Grinder Cut-Off Wheels Pneumatic Metal Sheet Cutting Tool Heavy Duty Air Cutter Cutoff Tool

  • ⚙️ COMPLETE AIR CUT OFF TOOL SET: The air cutter tool set comes with 2pcs 3" cut off wheel, 2pcs wrenches, 1pcs 1/4" NPT air fitting and 1pcs air....
  • ⚙️ AIR-POWERED&MAX SPEED 20,000RPM: The 3 inch air cut off tool is up to 20,000 RPM, which is 15% more efficient than ordinary air cutter tools,....
  • ⚙️ WHEEL GUARD AND SAFETY SWITCH: The high speed pneumatic cut off tool is equipped with 180 degrees wheel guard which is adjustable for 360....
  • ⚙️ EASY TO USE AND PRECISE TO CONTROL: The air cut off tool kit comes with 1pcs hex wrench and 1pcs hand wrench for you to easily install or....
  • ⚙️ VARIOUS APPLICATIONS: The high speed pneumatic cutoff tool is designed to cut through sheet metal, plastic pipes, composite material, exhaust....
Check Stock

OEMTOOLS 26528 10 Piece Cut Off Wheel Set with Mandrel, Cutoff Wheel Mandrel Set, Premium Metal Cutting Wheels w/ 3/8" Arbors, Die Grinder Cut Off Wheel

  • Superior Cutting: Get the best means for cutting fiberglass, plastic, steel, and other ferrous metals with our angle grinder cut off tool.
  • The flathead notch on the mandrel adaptor makes fitting the air tool arbor cutting wheels into tight spaces easy.
  • Compatible Discs: Our cutting discs are great for use on die grinders, air cut off tools, and angle grinders.
  • Get clean burr-free cuts every time with our 3 inch cut off wheel.
  • Excellent Maintenance Tools: Cut through the metallic fluid or oil lines of your vehicles with ease using our air cutting wheel.
  • Stuck bearings, bolts, screws, and more are removable with the premium metal of our 1/32” thick cut off wheels.
  • Durable Materials: Get strength from our cutting wheels for metal.
  • These cutting discs are 1/32” thick for long term use and made of premium metals that work at a max RPM of 20,400.
  • Product Specifications: 10 piece 46 Grit 3” x 1/32” cut off wheels.
  • Cutting discs feature 3/8” arbor holes.
  • Mandrel designed to fit 0.625 to 1/32” thick cut off wheels.
  • Cuts fiberglass, plastic, iron, steel, and other ferrous metals.
Check Stock