Reviews Metal Cable Pipe
MAXKOSKO Pipe Heat Cable for Pipe Freeze Protection, Self-Regulating Heat Trace Cable for Metal And Plastic Home Pipes, Energy-Saving Water Pipe Heat Cable Keeps Water Flowing at -40°F, 30Ft. 120V
- PIPE FREEZE PROTECTION: Pipe Heating Cable ,5 W/ft, heats up rapidly.This heating cable can keep water flowing at ambient temperatures down to -40°F (-40°C). It consists of a 3 Ft power cord Plus a heating cable varies from 3 Ft to 160Ft long..
- HIGH TECH SELF-REGULATING HEATING TECHNOLOGY: The pipe heating cable smartly adjust its power output and never overheat or Burn. Water pipe heat tape can be installed with Straight-traced, Spiraled, or Overlapped..
- ENERGY SAVING: Easy heat heating cable has a built-in thermostat that automatically turns on at 38°F, heat trace cable heats only when necessary..
- EASY INSTALLATION: This water pipe heat cable is pre-assembled and ready to Install. You can easily DIY this heat tape for pipes by yourself by following the 5-steps instruction.(If you want to test before installation, please test at a temperature under 0°C (32°F))..
- FOR BOTH PLASTIC AND METAL PIPES: The heat tape for water pipes protects commercial and residential plastic or metal water supply pipes from freezing in cold winter (Including RV, inlet pipe, drain pipe, sewer, palm tree frost protection, etc). And this pipe heating tape can freeze-protect pipes of up to 2in diameter..
Check StockEasy Heat AHB-112 Cold Weather Valve and Pipe Heating Cable, 12-Feet
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing.
- Includes grounded plug, built in thermostat, and instructions.
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer jacket.
- AHB units are activated and de-activated by an integral energy-saving thermostat.
- Approved for rigid plastic and metal pipe.
Check StockWater Pipe Heat Tape Self-Regulating Heating Cable with Power Indicator Plug Built-in Thermostat, 120V Heavy Duty Heating Cable for Pipe Freeze Protection (1 Pcs, 12 Ft)
- ...e it is needed, and cable output will be automatically adjusted according to the ambient temperature at each point along the cable.
- There is no risk of overheating to worry about, please check the installation manual for more secure.
- Versatile Usage: pipe warmer heating cable can be safely installed directly in metal, rubber, wood, asphalt, clay, synthetic roof, etc., can be applied by straight line, screw and overlap, more practical.
- It transfers heat to the pipes, avoids them from freezing and keeps them from getting too hot.
- Saves Energy and Energy: use built-in bimetal thermostat, pipe heating tape only works when thermostat temperature is 40 Fahrenheit, or below.
- Installed on metal and plastic supply pipes with water flowing at all times, this feature saves energy and energy while protecting the home water supply.
Check Stock52pcs Cable Clamps Assortment Kit 6 Sizes 1/4\ 3/8\ 1/2\ 5/8\ 3/4\ 1\ Cable Clamps Rubber Cushioned With Screws 304 Stainless Steel R Style Pipe Clamps Assorted Cable Wire
- MATERIAL: Clamps are made of 304 Stainless steel material and high quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
- QUANTITY: 12pcs 1/4" (6mm), 10pcs 3/8" (8mm), 8pcs 1/2"(13mm), 8pcs 5/8"(16mm), 8pcs 3/4"(19mm), 6pcs 1" (25mm) and 25pcs Screws M6x20mm. Cable clamp screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread.
- STYLISH DESIGN- The R-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install..
- APPLICATION:Cable clamps assortment kit are perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration..
- ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place..
- 3/4 pipe repair clamp pipe clamp tools pipe clamp tools pipe clamp pipe clamp 1/2 steel cable clamp 1/4 cable clamps 16mm cable clamp 3/4 cable clamp 3/8 cable clamp 3/8 insulated cable clamp cable clamp 1 cable clamp assortment cable clamps 1 inch cable clamps 1/2 cable clamps 3/4 inch cable clamps assortment kit insulated cable clamp lokman cable clamp 3/8 metal cable clamp 3/8.
Check StockHEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 75-feet 120V Roof deicing and Pipe freeze Protection
- 6 ft. water pipe heating cable, 42 watt, black color.
- Stops metal and rigid plastic pipes from freezing down to -40°F — built-in thermostat automatically turns heating on when pipe temperature is below 42.8° F (close to freezing) and turns heating off once pipe is warmed to 55.4° F (well above freezing).
- A single 6 foot heating cable is suitable for 6 foot to 8 foot long pipes that are 3/8 inches to 3/4 inches in diameter, or for 6 foot long pipes that are 1 to 1-1/2" in diameter. NOTE: Use only for water filled plastic (including PEX) or metal pipes. Not for use with anything else, like empty water pipes, fuel lines, hoses, gutters, steam lines, and so on..
- Features grounded plug with indicator light.
- Pre-assembled, easy to install using the included instructions. Materials required (not included) are: aluminum foil (recommended for plastic pipe), fiberglass plumbing pipe insulation, fiberglass tape or similar with temperature rating 175° F or higher..
Check StockHEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection
- The self-regulating pipe heating cable system is designed for mobile home and other dry applications etc. Can be used on residential metal or plastic water supply and drain pipe freezing protection..
- ETL approved. Tinned copper braid as the out jacket as well as electrical ground. Self regulating heating cable just deliver the heat where is need. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
- Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape..
- HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow..
- Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM p....
Check StockHEATIT JHSF1 Self Regulating Pre-Assembled Heating Cable 125-feet 120V Roof deicing and Pipe freeze Protection
- ETL approved. HEATIT is registered Trademark by zhukeshi(We didn't authorize other sellers in Amazon.com). Suitable for use on plastic and metal water pipes( including inlet pipe,drain pipe, sewer, palm tree frost protection etc). Industrial grade self regulating heating cable. The cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
- Protect pipes up to 2 1/2” in diameter. For a better freeze protection, at least 1/2 inch thick or thicker insulation material is recommended, especially for extremely cold weather. If the ambient temperature is lower than -20°F(-29°C), please use 1” thick insulation material. ETL approved. 50 degrees F for pipe freeze protection.3 ft 18/3 cold lead with grounded plug..
- Roof deicing application: HEATIT JHSF1 was designed to prevent the ice dam formation not to melt the ice dams which were already formed. Please turn on the cable at the beginning of snowing. Can be used on flat roofs, metal roofs, asphalt roofs, rubber roofs, slate roofs, stone roofs, metal roofs, ceramic....
Check StockEFIELD 3/8\ - 1\ Pex Pipe and Plastic Pipe Cutter
- EFIELD Pipe and Plastic cutter has a unique shaped blade which gives piping a Clean Cut, No Burrs.
- EFIELD Pipe and Plastic cutter Cuts any Size up to 1-Inch (This includes sizes from 1/8"-1").
- EFIELD Pipe and Plastic cutter has Easy locking handle to safely store Pex Pipe Cutter.
- EFIELD Pipe and Plastic cutter SHOULD NOT be used to cut: Metal Pipes, Cable Wires, and PVC Tubing.
- EFIELD Pipe and Plastic Cutter Works with Pex-Tubing and Nylon-Tubing..
Check StockVEVOR Pipe Heating Cable, 24-feet 7W Heat Tape for Pipes with Built-in Thermostat, Protects PVC Hose, Metal and Plastic Pipe from Freezing, 120V
- ...the harshest winters. A small investment in a pipe heating cable, a high return in protecting exterior water pipes from freezing. A helper in RV, basements, garages, gardens, crawl spaces, pumphouses, water tanks, outdoor hydrants, pipe valves, faucets, etc. Perfect for water-filled pipes such as PEX, PVC hose, and metal pipes..
- UL Certified Approved: Our pipe heat cable has 7 W/ft and has rapid heating. It only needs 2 minutes, the temperature rises 70℉ and keeps your pipes protected from -100℉ cold temperatures! You will never have an issue when everyone else has frozen pipes! UL-approved heating cable with IP68 waterproof rate assures 5 years’ worth of use..
- Premium Built-in Thermostat: Thanks to the built-in thermostat with an accuracy of ±1°, the heat tape for water pipes automatically turns on at 43℉/6℃ and stops working at 55℉/13℃. Compared with a heat-shrinking sleeve thermostat, our high-strength injection molding thermostat is much more secure to use..
- Perfect 24 ft Length: The 24 ft heat cable for pipes has a 2 ft power cord, allowing it to work at long distances. The linear distance between your pipe and the valve is approximately equal to the heating line length. Put the heat tape on as a “protective suit” for your pipe.....
Check StockDEWENWILS Roof Heat Cable, 18ft Heat Tape for Pipe, Gutter, Roof, Self-Regulating Cable Pre-Assembled, UL Listed
- Designed for water filled plastic (including PEX) and metal supply pipes only. Do not use on drain lines, fuel lines, hoses, empty water pipes, steam lines or gutters. Three year limited warranty. If you have any question about the product, please contact us and we will try our best to help you..
- Quick and easy to install. Minimum pipe length is 3 feet. Cable will be applied straight along the pipe, and will protect pipe from 3/8" to 1 1/2" in diameter..
- Save energy. 120 Volt, 7 watts/ft. 2 ft 18/3 cold lead with plug.The build-in thermostat automatically turns the heating cable on below 42.8° F (6° C) and off above 55.4° F (13 ° C)..
- UL approved. Durable polyurethane as inner insulation and weather resistant PVC (high-low temperature) for outer protective jacket. Never allow heating cable to touch, acorss , spiral or overlap itself at any point..
- Testing the cable before installation. Uncoil the cable, plug in the cable. Wrap a bag of ice around the thermostat. The thermostat will turn the cable on when the temperature below 42.8° F. Wait about 20 minutes. The cable should now feel warm to touch. Then turn it off..
Check StockHEATIT JHSF 60-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
- ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check StockHEATIT JHSF 120-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
- JHSF doesn't work unless the ambient temperature is below 37F/3 degree C. Please test the cable in a cold environment..
- Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protection etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable..
- Pre-assembled, easy to install. Including grounded plug with light, built in thermostat(turn the cable 37F on 50F off) and instructions. 120 volt, 3 watts/ft at 50 degrees F. Protect pipes up to 2" in diameter. Can be used by straight, spiral and overlap..
- ETL approved. 2 ft 18/3 cold lead with plug. The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65..
- Testing the cable before the installation. Uncoil the cable, plug in the heating cable. Normally you can feel the slight warm on the heating cable in few minutes..
Check StockEasy Heat AHB-180 Cold Weather Valve and Pipe Heating Cable, 80-Feet
- Easy Heat pipe heating cable installs quickly and easily to keep water flowing.
- Includes grounded plug, built in thermostat, and instructions.
- Each cable consists of tough PVC inner insulation, a continuous ground braid, and weather-resistant PVC outer Jacket.
- Ahb units are activated and de-activated by an integral energy-saving thermostat.
- Approved for rigid plastic and metal pipe, UL listed.
Check Stock