Reviews Metal Bead Reamer

5/8 Drill Bridge/Construction Reamer with 1/2 Shank Chuck,HSS Taper Bridge Reamer Bit Tool for Steel Metal Wood Alloy to Align Existing Hole and Enlarge Hole

  • The heavy duty high-speed steel bridge reamer is also called construction reamers,it used for aligning an existing hole and enlarging undersized hole prior to bolt or rivet installation.Our reamer bit aligns and enlarges pre-drilled holes ready for bolting..
  • Makes reaming holes out extremely easier than using large drill bits,the reamed hole is smooth without tear-outs. But there must be a existing hole or a pilot hole that is smaller than 5/8" before using our 5/8" Bridge/Construction Reamer..
  • The tapered point design permits the reamer bit to enter into the overlapping holes of out-of-line,make the bolt holes line up.Enlarging the holes in the steering knuckles and pitman arm..
  • The 5/8" bridge reamer bit is not a drill bit,only aligning reamer to aligh holes which are pre-drilled.If you need to expand a hole to 5/8". At first there must be a 3/8" pre-drilled hole,then ream out to 5/8"..
  • Commonly used in bridge,construction,steel erection and automotive truck trailer industries,specially use in structural materials such as steel, metal, alloy aluminum,brass,plastic,iron,nickel,copper,cast iron etc.Three symmetrically placed flats on shank provide positive grip in portable electric and pneumatic tools..
Check Stock

Cannulated Reamer Orthopedic Instrument (8 mm - 14 mm) (1, 12 MM)

  • [INTEGRAL MOLDING] The reamer is integral molding, after quenching, which has stable sizes and good durability..
  • [CEMENTED CARBIDE] Made of cemented carbide material, with high hardness and wear resistance, not easy to deform and corrode..
  • [HIGH EFFICIENCY] With fine grinding flutes, chip removal is smoother without clogging, efficient and labor saving in operation..
  • [UNIVERSAL SHANK] The machine reamer has universal shank design, stable in clamping and not easy to slip or fall off..
  • [APPLICABLE MATERIAL] Suitable for drilling stainless steel, carbon steel, cast iron, die steel, alloy steel, non ferrous metal materials..
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

Mxfans High Speed Steel 29.5-33.5mm Slitting Dia Adjustable Hand Operated Reamer

  • Fit for A3 steel, alloy steel, cast iron, cast steel, aluminum and other metal materials, etc..
  • Functions:The reamer are used to remove the rotating tool that has been machined to the thin metal layer of the surface. The precise size and shape can be obtained after the hole is machined through the reamer..
Check Stock

Machine Reamer, Carbide Taper Shank Milling Cutting Tool High Grinding Accuracy for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
Check Stock

Taper Shank Milling Cutting Tool, Lathe Machine Reamer High Grinding Accuracy Flexible Carbide for Stainless Steel

  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
Check Stock

Taper Shank Milling Cutting Tool, High Grinding Accuracy Flexible Lathe Machine Reamer Refined Grooves for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

QWORK Chucking Reamer Set, 8 Pcs HHS H8 Straight Shank Machine Chucking Reamer Milling Cutter, 3/4/5/6/7/8/9/10mm

  • ⭐The reamer set are made of high speed steel, high hardness and good toughness, long service life..
  • ⭐With sharp cutting-edge, the chucking machine reamer set have high cutting ability, high accuracy and clean cutting..
  • ⭐This HSS H8 reamer set can process surface of iron, steel, plastic, wood, copper, aluminum and other metal materials..
  • ⭐The straight shank milling cutter tool set are widely used for bore machining, reaming to mould processing and handicraft processing, installed in drilling machine, milling machine, etc.
Check Stock

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

  • Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
  • Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
  • Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
  • Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
  • Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stock

Drill America 1-1/4\ High Speed Steel Straight Flute Taper Pipe Reamer, DWR Series

  • Self-feeding spiral design for extra-fast and easy hand reaming.
  • Suitable for hand reaming on pipe, sheet metal or for enlarging conduit box outlets.
  • The model 2-S reamer is not suitable for power reaming.
  • Pipe reamer has a 1/4-inch to 2-inch (6 mm to 50 mm) pipe capacity.
Check Stock

GUPE Milling Cutter Tool Reamer Tight Holding 5689003cbr/003ein wearresistant 9SiCr for Metal

  • FOR VARIOUS METAL MATERIALS: reamer is widely used in steel, die steel, aluminum alloy, cast iron, copper, galvanized pipe and other metal materials.
  • DURABLE 9SICR MATERIAL: Adopt good quality 9SiCr overall forging, the cutter body is firm, wear resistant and durable, and adopt processing.
  • TIGHT AND ACCURATE: Come with universal shank type, widely used, possess tight clamping, , and high grinding accuracy.
  • 21‑23MM RANGE: Equipped with a storage box, easy to store and carry. There are a total of 6 flutes on the reamer, range from 21-23mm.
  • FLEXIBLE ADJUSTMENT: Fully automatic refining process is adopted, which can be passed or stopped to meet the technical requirements of processing, very flexible.
Check Stock

QWORK 4 Pack Copper Pipe Cleaner and Reamer Set, 4 In 1 Pipe Deburring Brush Inner Outer Reamer Tubing Chamfer Tool for PVC PPR Copper Brass Aluminum Pipes

  • Package Contents: Includes 2 pieces of 4-in-1 pipe cleaning brushes and 2 pieces of inner-outer reamer,.
  • Fit: The reamer is suitable for 3/16 inch to 1-1 / 2 inch pipe diameter, ideal for PVC PPR Copper Brass Aluminum Pipes..
  • Advantage: It can remove burrs in clockwise and counterclockwise directions. Can also clean the inside and outside of most pipes..
  • Usage: Rotate the screw switch to adjust the distance of the cutting wheel. Suitable for cleaning, polishing, paint removal/ rust removal of metal part..
  • Durable: Pipe reamer - Plastic, internal deburring blade - alloy steel, and brush - stainless steel, anti-rust, durable to use..
Check Stock

PAGOW 1/2\ Hand Reamer, High Speed Steel H7 6 Straight Groove Reamer, Straight Flutes Hand Milling Cutter Tool

  • Premium Material: The material is low alloy steel with high hardenability and low hardenability. The reamer has the characteristics of high wear resistance, less severe cutting and less deformation..
  • Hand Reamer: Reamer for reaming holes have been drilled after processing (or reaming) on the workpiece, mainly to improve the precision of the hole, reducing its surface roughness, is finishing and semi-finishing tool for the hole..
  • Straight Flute Tool: 6 Flutes & Straight Shank. Allows chips to collect in the flutes when cutting, well suited for most applications in shallow cuts..
  • Application Object: Installed in the lathe for cutting of metal tools. Straight flute hand reamers is used in ferrous metals and most nonferrous metals. Designed for accurate reaming in aluminum, cast iron, copper, magnesium alloy, plastic, wood, etc..
  • Application: Good for general purpose applications, offering combination of hardness and toughness for wear resistance. Features just the base substrate without any additional treatment or coatings, suitable for wide ranges of applications..
Check Stock