Reviews Mercruiser Low Oil Pressure

Sierra International 18-6754, Tilt / Trim Motor , white

  • Features low pressure, high flow and a 20 Amp fuse.
  • Designed for Mercruiser (1983 & Later) stern drives without "quick connect".
  • Use with Sierra's 18-6772 Tilt Pump Motor.
  • Interchangeable with Mercruiser Stern Drive 14336A15, 14336A17, 14336A22, 14336A28, 14336A6, 14336A9, 881836A, 88183A11, 88183A12, and 96477A3.
Check Stock

Mercury Marine Mercruiser High Performance Gear Lube Quart 92-858064K01 & Pump Kit

  • Fluid Pump & 1 Qt Genuine OEM Factory Original Equipment Mercruiser Sterndrive/Outdrive Oil.
  • Exclusive formula is engineered to provide extended gear life in extreme conditions including high-speed and high-horsepower applications.
  • Extreme pressure synthetic additives protect gears from metal to metal contact.
  • Engineered to provide maximum protection for sterndrive and outboard lower units.
  • For use in most gear housings of Mercruiser sterndrives and all Mercury, Mariner, and Force Outboards.
Check Stock

Electric Fuel Pump for carburated Volvo Penta 3858261 3850809 3854620 3857986 4.3 5.0 5.7

  • New electric marine fuel pump compatible with OMC, Volvo Penta, and Mercruiser V6 and V8 engines..
  • Compatible with Mercruiser part number 805656A2.
  • Compatible with Volvo 3858261, previous part numbers are 986865, 3857986, 3857985, 3854620, 3850810, 3850809.
  • Fits all Volvo Penta V6 and V8 carburated engines from early 1990's and newer.
Check Stock

2-Pack Mercury Marine Mercruiser Oil Filter 35-866340K01

  • Genuine OEM factory original equipment Mercruiser Oil Filter PN 866340K01.
  • Fits all Mercruiser sterndrive and Inboard GM engines except 4.3L V6 without remote oil filter.
  • Fits GM 3.0L, 4.3L V6 with remote oil filter, 5.0L 305, 5.7L 350, and more.
  • Replaces Mercury 35-866340Q03 and Sierra 18-7824-1.
Check Stock

858058Q01 Premium Gear Lube 80W-90

  • Water intrusion - advanced emulsifiers prevent foaming to protect gears if water enters gear housing.
  • Wear - tackifiers and extreme pressure additives improve oil film adhesion and protect against Excessive wear.
  • For use in all outboard lower units, jet pumps, and Sport JETS and all Mercury mercruiser sterndrives.
Check Stock

MERCURY Marine Mercruiser Oil Filter 3.0L 4.3L V6 5.7 350 V8 35-866340K01

  • Genuine OEM factory original equipment Mercruiser Oil Filter PN 866340K01.
  • Fits all Mercruiser sterndrive and Inboard GM engines except 4.3L V6 without remote oil filter.
  • Fits GM 3.0L, 4.3L V6 with remote oil filter, 5.0L 305, 5.7L 350, and more.
  • Replaces Mercury 35-866340Q03 and Sierra 18-7824-1.
Check Stock

Mercury 92-858064K01 Marine SAE 90 High Performance Gear Lube 1 Quart

  • Water intrusion - advanced emulsifiers prevent foaming to protect gears if water enters gear housing.
  • Wear - tackifiers and extreme pressure additives improve oil film adhesion and protect against Excessive wear.
  • For use in all outboard lower units, jet pumps, and Sport JETS and all Mercury mercruiser sterndrives.
Check Stock

Quicksilver 866340Q03 Oil Filter - MerCruiser Stern Drive and Inboard Engines

  • Superior M-Pleated cleansing filter media removes oil contaminants that could damage your engine.
  • Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your MerCruiser engine.
  • Features an anti-drain back valve to ensure start up lubrication and eliminate dry starts.
  • 50% thicker metal shell than conventional filters with a durable, corrosion resistant finish.
  • For MerCruiser High Performance stern drive or Inboard engines made by General Motors and Mercury Marine.
Check Stock

JIFETOR Oil Pressure Gauge Tester Kit Engine Transmission Fluid Test Tool Set 12PCS, 500psi Automotive Mechanical Automatic Gearbox Line Pressure Meter for Car Truck Motorcycle ATV

  • ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: This oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The oil pressure gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • EASY TO CHECK ENGINE OIL PRESSURE: Remove low oil pressure switch, attach the engine pressure tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the engine oil pressure tester, replace the low oil pressure switch, then done..
  • FITMENT TYPE: The transmission pressure gauge kit includes 12PCS selectable brass connectors (include the one on hose), very sturdy and durability. These connectors can be connected to the corresponding sizes oil pressure test service port, on most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on..
  • PRESSURE GAUGE AND HOSE: Transmission pressure gauge adopts rubber cover pro....
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

YXYX Hydraulic Crimping Kit Hydraulic Foot Pump CFP-2000B Hydraulic Tools for Terminal, Cable Crimping

  • Output of oil:low pressure 13cc,high pressure 2.3cc.
  • Max output pressure:low pressure 20kg/cm2,high pressure 700kg/cm2.
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

AC Oil Injector Tool R134A R410A R22 R12 Refrigerant Compressor Oil Dye Injector 2Oz AC Dye Kit Well-sealed AC Oil Injector Kit Fast AC Recharge Kit with 1/4″ SAE Thread&R134a Quick Coupler HVAC Tools

  • ...efrigerant into the system, the filling speed is fast, the sealing is good and it is not easy to leak during use, and the filling is very thorough with little residue, helping you to easily complete the filling work..
  • 【R134a Quick Connector of AC Oil Injector Tool R134a】AC recharge kit is equipped with R134a low pressure AC quick connector adapter, which is made of solid brass metal, which has strong sealing, wear resistance and corrosion resistance, and is not easy to rust, ensuring that you can use it for a long time..
  • 【High Pressure Resistant Hose with 1/4″ SAE Thread】The hose of AC dye injector has a pressure of up to 600-3000PSI. The hose port is 1/4″ SAE thread, which can be used to connected to automotive high/low pressure quick connector/adjustable connector with 1/4″SAE thread, or can be directly connected to air conditioner with 1/4″SAE thread. The hose port features a non-slip knurled grip design for quick and easy connection or disconnection..
  • 【Easy to Use】Fill the oil cylinder of the automotive ac oil injector with 2 ounces of refrigeration oil, connect the low pressure quick connector to the low pressure interface of the car air conditioner, and fill the appropriate pressure, and the refrigeration oil can be easily inje....
Check Stock