Reviews Mercedes Supercharger Kits

XtremeVision LED CanBus Super Decoder - Error Code Canceller - Anti Flicker Capacitor (1 Pair) - H11 / 880 / H9 / H8

  • Anti flicker LED capacitors are useful for vehicles that get a flickering or strobe effect when installing after market LED kits..
  • Eliminates error warnings or bulb failure warnings in Mercedes, BMW and other vehicles..
  • Has Resistor & Capacitor built in to solve error messages..
  • 100% Plug and Play. Includes One Pair (2) Canceller Capacitors..
  • Disclaimer: We can not guarantee it fixes all flickering issues, certain car model require different type of canceller containing a capacitor or resistors. Please contact us for support if you have issues.DescriptionXtremeVision LED Canceller Capacitors.
  • XtremeVision LED canceller capacitors are a solution choice when It comes flickering issues when installing LED conversion kits. Our LED canceller capacitors are only require by certain vehicles, that is why they are sold separately from LED conversion kits. It may solve flickering issues for most vehicles including: Ford, Cadillac, BMW, Chevrolet, Chrysler, Dodge, Hyundai, Jeep, Mercedes Benz, etc. The canceller capacitors are fully Plug-and-Play, allowing for a quick and easy installation..
  • Note: If Error Code Canceller Capacitor is not compatible in solving the error/flicking issue, please try our load resistor instead which solve most issues for LED applicatio....
Check Stock

Akozon Car Supercharger Repair Kit Bottom Cover LR088564 Replacement For L332 5.0 V8 2010‑2012

  • 【Aphare of Appilcation】This Car Supercharger Repair Kit Bottom Cover is specially Replacement For Range Rover L332 5.0 V8 Supercharged 2010‑2012 and so on..For more models please check the Fitment list below,and make sure the model is suitable to avoid inconvenient..
  • 【Aphare of Appilcation】This Car Supercharger Repair Kit Bottom Cover is specially Replacement For Range Rover L332 5.0 V8 Supercharged 2010‑2012 and so on..For more models ....
Check Stock

RKX 3.0L 2006 + Vacuum pump Re-seal Rebuild kit compatible with Dodge / Mercedes Freightliner Sprinter

  • RKX 3.0 L vacuum pump reseal kit compatible with Dodge / Mercedes Benz Sprinter.
  • Includes all needed gaskets to rebuild the 3.0L pump and stop it from leaking oil. Dodge / Mercedes do not sell this kit as a spare part. They want....
  • Our custom injection molded seals are made from military grade Fluorocarbon (Viton) and designed to hold up under the extreme conditions of your....
  • Resealing your pump is cost effective and easy! Our kits included everything needed to seal your pump and stop it from leaking oil..
  • Fits Freightliner Sprinter 3.0L 2007 - 2017. Part number interchange info: A6462300165 , A 646 230 01 65, A6422300065, A 642 230 00 65.
Check Stock

Dancyn Studios Desktop Supercharger Replica Charging Station, Supercharger Station Fits USB C and Charging Cables

  • ✔︎ PRODUCT INFORMATION: This is a replica Supercharger and has been made into a desktop charging station for your phone..
  • ✔︎ FEATURES: Desktop supercharger to charge your phones..
  • ✔︎ FUNCTION|DURABILITY: Made with PLA plastic. Extremely sturdy and lightweight. Comes in multiple pieces and is assembled together..
  • ✔︎ PRODUCT SPECIFICATIONS: Assembly is required. Please follow the step-by-step instructions below in this listing on how to assemble this supercharger..
  • ✔︎ SET INCLUDES: All pieces needed to put this together are included in the package. Assembly instructions are listed below..
Check Stock

ICT Billet Gen 5 L83 L86 LT1 Cylinder Head to LT4 Tall Supercharger Adapter Plates Intake Manifold 551770

  • Adapt LT cylinder heads to a LT4 supercharger.
  • Compatible with 2014 and newer V8 LT series engines.
  • Includes: 2 adapter plates (2-1/2″ thick) with 8 O-ring seals, 10 adapter to head bolts, and 10 supercharger to adapter bolts.
  • Tall design allows the LT4 supercharger to clear the factory L83 / L86 water pump.
  • Made in Wichita, Kansas from aerospace grade, USA produced billet aluminum.
Check Stock

Pioneer PE-114-BR Expansion Plug Kit

  • Compatible with:2006-2011 Mercedes ML350/E350/R350/C350 2008-2012 Mercedes C300/GL550 2006-2007 Mercedes C230/C280 2010-2012 Mercedes GLK350 2007-2011 Mercedes S550/CLS550/E550 2006-2009 Mercedes CLK350 2007-2012 Mercedes GL450 2007-2010 Mercedes CL550 2007-2009, 2011-2012 Mercedes SL550 2007-2009 Mercedes CLK550 2009-2015 Mercedes G550 2010-2011 Mercedes ML450 2008-2011 Mercedes ML550 2010-2013 Mercedes S400 2006-2008 Mercedes SLK280 2009-2011 Mercedes SLK300 2005-2011 Mercedes SLK350.
  • Content:1x Crankcase Oil Separator Cover, 2x30mm Expansion Plug, 1x 65mm Expansion Plug.
  • Replace Part Number:2720100631, 0009985690, 0009986590.
  • We adopt the highest grade materials to make our product. It bring durable and reliable feature under extreme conditions..
  • Warranty:For any reason, if you are not satisfied with your purchase, contact us directly. We offer a one-year warranty, 100% satisfaction guarantee..
Check Stock

Remanufactured Supercharger Turbocharger Roots Car Auto Kompressor Supercharger Compresspr blower booster Kompressor for 0.8-2.0L AISIN AMR500

  • Mechanical car auto compressor kompressor turbocharger turbine, mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • AMR500 Turbocharger can be reduced 3%-10% in fuel consumption..
  • AMR500 Supercharger can be increased 10% - 30% in engine power..
  • The direction of rotation of the turbocharger is the same as that of the engine..
  • NOTE:Installation Manual Is NOT Included ,Professional Installation Is Highly Recommended.Note that the supercharger is a v pulley (VPK), Before installation, the gear oil must be filled with about 90ml, and the oil type is 85w-90, GL-5..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

TRW Pro TRH1291 Disc Brake Pad Set For Mercedes-Benz G63 AMG 2013-2018, Front, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Audi RS7: 2014 - 2018, Mercedes-Benz AMG GT: 2020, Mercedes-Benz AMG GT 43: 2021, Mercedes-Benz AMG GT 53: 2019 - 2021, Mercedes-Benz AMG GT 63: 2019 - 2021, Mercedes-Benz AMG GT 63 S: 2019 - 2021, Mercedes-Benz AMG GT C: 2018 - 2020, Mercedes-Benz AMG GT R: 2018 - 2020, Mercedes-Benz AMG GT S: 2016 - 2019, Mercedes-Benz C63 AMG: 2008 - 2015, 2018 - 2020, Mercedes-Benz C63 AMG S: 2015 - 2021, Mercedes-Benz CLK63 AMG: 2008, Mercedes-Benz CLS63 AMG: 2007 - 2014, Mercedes-Benz CLS63 AMG S: 2014 - 2018, Mercedes-Benz E63 AMG: 2007 - 2015, Mercedes-Benz E63 AMG S: 2014 - 2016, Mercedes-Benz G63 AMG: 2013 - 2018, Mercedes-Benz G65 AMG: 2016 – 2018 and more.
Check Stock

TBVECHI Turbocharger, Supercharger AMR500 Turbocharger Mini Roots Supercharger Blower Booster 0.8-2.0L

  • ☑【Specification】Car Maker: Universal. Material Type: Steel Aluminum. Type: Supercharger. Displacement: 0.8-2.0L. Lifting power: 10-30% increase in engine power. Fitment Type: Direct Replacement..
  • ☑【Wide Usage】This is a universal supercharger, any model, 2.0 and below displacement, as long as there is space to install..
  • ☑【AMR500 Turbocharger】Mechanical car auto compressor kompressor turbocharger turbine mini roots supercharger blower booster for 0.8-2.0L AMR500..
  • ☑【Package Includes】1 X AMR500 Turbocharger..
  • ☑【Guaranteed】This item will ship from USA, delivery time need about 5-8 days. If there is any questions please feel free to contact with us, email the contact information that comes with the package, our experienced TBVECHI customer service team will response in 24 hours. You Deserve the Best After-sales Service..
Check Stock

Desktop Supercharger Replica Charging Station Supercharger Station - Fits USB-C Cables for Android and iPhone Red

  • ? REPLICA TESLA SUPERCHARGING DESKTOP STATION - Surprise your Tesla enthusiast with this unique 3D printed replica of Tesla's Supercharger - now made....
  • ? MANAGE YOUR WORKSPACE with the Desktop Supercharger USB cable organizer. Replicate the Supercharging experience in a miniature form while keeping....
  • ? GREAT GIFTS FOR TESLA OWNERS - Designed based off the real life supercharging stations around the world. Made with PLA plastic. Extremely sturdy and....
  • ? PERFECT GIFT FOR A TESLA ENTHUSIEST - Upgrade your desktop with this unique home décor replica prop. Product requires assembly. Please follow the....
  • ? USE YOUR OWN CHOICE OF POWER CORD - Charge your iPhone or Android with this super cool Tesla inspired supercharger. You can use this with any cable....
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

TRW Pro TRH1424 Disc Brake Pad Set For Mercedes-Benz E350 2010-2016, Rear, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Mercedes-Benz CL550: 2011 - 2014, Mercedes-Benz CL600: 2011 - 2014, Mercedes-Benz CLS400: 2015 - 2017, Mercedes-Benz CLS550: 2012 - 2018, Mercedes-Benz E250: 2014 - 2016, Mercedes-Benz E350: 2010 - 2016, Mercedes-Benz E400: 2013 - 2016, Mercedes-Benz E550: 2010 - 2014, Mercedes-Benz S350: 2012, Mercedes-Benz S400: 2011 - 2013, Mercedes-Benz S550: 2010 - 2013, Mercedes-Benz S600: 2010 - 2013, Mercedes-Benz SL550: 2011 - 2012.
Check Stock