Reviews Mens High Chucks 2

Yonico 43031S 2-Inch Diameter Steel Forstner Drill Bit 3/8-Inch Shank

  • This steel forstner bit has a 2" cutting diameter and a 3/8" shank compatible with all standard drill and drill press chucks..
  • Drill clean and accurate holes in solid wood, plywood and MDF.
  • Constructed from high-speed-steel for quality and longevity.
  • The 3/8" shank is compatible with all standard drill and drill press chucks.
  • Hardened steel constructions for increased rigidity.
Check Stock

Chuck handtite keyless 1/2-Inch carded

  • For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
  • Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.
Check Stock

Jet JDP-17MF Drill Press Owners Manual

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK store carries a comprehensive selection of replacement parts for all types of bandsaws, including blades, guides, tires, bearings, pulleys, belts, motors, switches, and other components..
Check Stock

SUNJOYCO Drill Chuck for Impact Driver, 1/4\ Hex Shank Power Drill Chuck Adapter Drill Converter Adapter (0.3-6.5mm,0.3-6.5mm, 2pcs)

  • SPECIFICATION: 2 pieces 3 jaw drill chucks with 1/4" hex shank (0.3-6.5mm,0.3-6.5mm).
  • QUICK CHANGE DRILL CHUCKS: The drill chucks converter could easily concert from fastening to drilling with a 1/4-inch hex shank, allowing you to quickly change tools with one hand..
  • BENEFITS: SUNJOYCO drill chucks for impact drivers eliminate the need for carrying two separate drills during lighter drilling jobs, and allow the use of straight shank and standard drill bits. These handy accessories are easily stored in any toolbox or tool bag..
  • APPLICATIONS: The SUNJOYCO power drill chuck is ideal for starting screw holes in hard-to-reach spaces, and good for light-duty accessories including drill bits, sanding drums, polishing wheels, wire & bristle brushes, and cut-off wheels..
  • WARRANTY: We provide a 2-year warranty policy for these diamond grinding wheels. Buy with confidence. If you have any concerns or questions about our cement grinding wheel, please feel free to contact us..
Check Stock

Bobique 0.8-10mm Right Angle Bend Extension 90 Degree Professional Cordless Drill Attachment Adapter

  • ...th and wear resistance, which are strong, stable, and not easy to break so that you can keep them for a long time.
  • 【105° Right Angle Drill Attachment】It comes with a 105° right angle drill bit, suitable for drill bits, cordless drills or hand wrenches and screwdriver chucks. Made of high-quality aircraft carrier steel raw materials, fast, high-hardness angle steel drill frame, quick replacement, rust-proof. Specially designed for computer cases, electrical cabinets and other screwdrivers that work in tight spaces.
  • 【105° Right Angle Drill Attachment】It comes with a 105° right angle drill bit, suitable for drill bits, cordless drills or hand wrenches and screwdriver chucks. Made of high-quality aircraft carrier....
Check Stock

New Replacement After Market V-Belt 1343756 1343782 Delta Drill Press 11-990 K 32.5

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Delta Model 11-990 Type 1.
Check Stock

GODESON Air Chuck Locking Air Chuck use for Tire Inflator Nozzles Pack of Clip-on and Twist-on Chucks Pack of 2pcs

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with lock on make the tire air chucks durable and Reliable..
  • 2. INTERCHANGEBALE AIR CHUCKS- including Clip-on chuck and Twist-on chuck(thread on) in 1 package. You just choose it for different using. Clip- on....
  • 3. SMART DESIGN with Large Bore of tire air chuck, Open flow through for heavy duty air chuck, while close flow through for clip-on chuck.
  • 4. UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex Air Chucks, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction....
Check Stock

GODESON Air Chuck, Screw on Tire Inflator Nozzle for Tire Inflator Gauge Compressor Accessories, Twist-on Chucks(Pack 2pcs)

  • 1. HEAVY DUTY BRASS CONSTRUCTION of tire chucks with locking on make the tire air chucks durable and Reliable..
  • 2. INTER SCREW TIRE CHUCK - including 2 packs Twist-on chuck(thread on) in 1 package. Twist-on chuck can tightly hold the tire valve of bicycles,motorcycles,cars, buses and trucks..
  • 3.TIRE INFLATOR CHUCKS with thread can make it bite on the tire valve stem tightly when inflating.
  • 4.UNIVERSAL CONNECT TYPE ,1/4-Inch Female NPT, 3/4-Inch Hex, Fits Standard 1/4" NPT Fittings.
  • Quick connect tire inflator chuck, Designed to use with Inflator and pressure gauge. LIFETIME 100% Satisfaction Guarantee..
Check Stock

Wood Lathe Drill Chuck Fits - Jet 1440Vs Wood Lathe - 3/4 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Jet 1440Vs Wood Lathe.
Check Stock

Metal Lathe Drill Chuck Fits - Grizzly G8688 Metal Lathe - 1/2 Inch Heavy Duty Drill Chuck - Replacement Drill Chuck - Made in the USA

  • LIFETIME ASSURANCE : All our accessories for sanders, planers, sharpeners, band saws, compressors, drills, including bearings, guide bearings, thrust bearings, drill chucks, drive belts, arbors and band saw tires are backed by top-notch service and EVERLASTING commitment..
  • MADE IN THE USA : Every single drill chuck and arbor is EXCLUSIVELY designed and produced in the USA in line with the highest quality standards. Choose our smooth bearing replacement for dependable performance..
  • WIDE COMPATIBILITY : DNLK drill chucks and arbors are compatible with most brands. Order our heavy duty drill chucks and profit from reduced downtime and maintenance..
  • SUPREME DURABILITY, WEAR RESISTANCE : In addition to a tight fit and flawless operation, our drill chucks and arbors have been tested and have proven to withstand high shocks and heavy-duty loads in both cold and hot environments..
  • DNLK drill chuck will fit Grizzly G8688 Metal Lathe.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • ...manual up and down movement function.Integrated cross worktable,width is widened,with high precision positioning adjustment scale,which can be moved from front to back,left and right.It is important to note that this lathe has only a metric scale..
  • 【With MT3-ER32 Collect Chucks】Mini Mill Grinding machine comes with a set of MT3-ER32 milling chucks,without additional purchase.The size:4-3/5-4/6-5/8-7/10-9/12-11/14-13/16-15.Different sizes of chucks will meet your needs..
  • 【Digital Readout】Variable Speed Mini Milling/Drilling Machine USES an integrated spindle and brass gear,which makes it not only precise but also durable.The rotating speed display and the drilling and millling depth display are all high-definition LCD screens, which are clearer and richer than the previous digital tube display and convenient to operate for all kinds of metal,wood,and other materials processing,widely used in machinery manufacturing,woodworking,DIY and so on..
Check Stock

CAT40 ER16 Collet Chucks 5 Pcs w Projection 2.76\-6\ Balanced G2.5 @20,000 RPM

  • Package includes: 2PC CAT40 ER16 collet chucks with Projection 2.76".
  • 2PC CAT40 ER16 collet chucks with Projection 4.
Check Stock

CAT40 ER32 Collet Chucks 5 Pcs w Projection 2.76\-4\-6\ Balanced G2.5 @20,000RPM

  • Package includes: 2PC CAT40 ER32 collet chucks with Projection 2.76".
  • 2PC CAT40 ER32 collet chucks with Projection 4.
Check Stock