Reviews Medium Voltage Cables

TOPGREENER Recessed Low Voltage Cable Wall Plate for Home Theaters, Size 2-Gang 4.50' x 4.50', Polycarbonate Thermoplastic, TG8882-2PCS, White (2 Pack)

  • The perfect solution for concealing low-voltage audio or video cables inside your wall. Reduces wire clutter, and provides a hidden cable management system for flat panel TVs, gaming systems, or entertainment consoles.
  • Works with HDMI cables, coaxial cables, standard A/V cables, speaker wires, DVI, S-Video, network RJ45 cables, and other low-voltage cables.
  • Reversible cable entrance can be mounted facing up or down to run communications cabling as desired. Easily installed onto low-voltage mounting brackets.
  • Made of polycarbonate thermoplastic material to provide durability and resilience to withstand hard impacts and heavy force.
  • ETL Listed - product has been tested and meets the high quality and safety standards of ETL.
Check Stock

QWORK 10 Pack Low Voltage Mounting Bracket, for Telephone Wires, Network Cables

  • Fully adjustable: Adjust to fit 1/4 inch to 1 inch thick wallboard, gypsum board or paneling..
  • Designed for: For flush installation of wall panels, with oval holes on the bracket for final displacement and straightening..
  • Easy Installation: Horizontal or vertical installation, used to install low-voltage wires and cables, with fast installation speed..
  • Usage: Used to install low-voltage wires and cables, for Telephone Wires, Network Cables, HDMI, Coaxial, Speaker Cables..
  • 100% Satisfied Service: Enjoy a smooth & frustration free experience with our 100% Satisfied Service in one Month..
Check Stock

NASSAU ELECTRICAL SUPPLY 6/3 UF (Underground Feeder - Direct Earth Burial) Cable (150FT)

  • Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth.
  • Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth.
  • Detecting fuses and assigning current circuits..
  • Both transmitter and receiver display power level, code, battery, detected voltage type and value, and high-voltage alert..
  • Transmitter built in DC/AC voltage meter for linear measurement of 12-400V DC/AC voltage.
Check Stock

Recessed Wall Plate - Single Gang Low Voltage Cable Entry Access Opening Port Wiring Plug Jack Decorative Face Cover Socket Insert Outlet Mount Panel (White)

  • Install low voltage cables behind your flat panel TV or other audio/video devices, flush to the wall surface.
  • The mounting wings are molded into the easy mount wall plate and fasten tightly against the back of the drywall and can be installed upright or upside down.
  • Run your cables cleanly and neatly through the wall.
  • Perfect for HDTV & wall mount installations and home theater.
  • Allows cable management internally rather than externally.
  • Organize and protect low voltage cable when passing through the wall.
  • Works great with HDMI cables, coax cables, all standard AV audio video cables, speaker wires, all network cables and more.
Check Stock

3pcs High Voltage Generator DC 6-12V to 1000kV Boost Step-Up Inverter Arc Pulse Generator Power Module High Voltage Transformer (1000 KV)

  • High Voltage Generator:Input Voltage: DC 6V to 12 V.
  • High Voltage Generator Cables: Output Cable Length: About 100mm.
  • Input Cable Length: About 100mm(Red is Positive).
  • High Efficiency: Voltage Generator Modules are Made of a High-Voltage Transformer Through a Circuit of Components and Using the Principle of Tesla Coils , Output High Voltage Pulse,High Efficiency.
  • Easy to Connect:High Voltage Generator come with Input and Output Cables and the Peripheral Circuit is Simple,Just Connect the Cable with the Switch and Battery and the Discharge Intensity is Great.
  • Wide Application: High Voltage Generator Can Be Used for Student Science Experiments, Electronic Instruments,Anion Generators,Science Small Productions and etc..
Check Stock

TOPGREENER Bristled Brush Wall Plate Multimedia Pass-Through Insert with Decorator Wall Plate for Low Voltage Cables, Size 1-Gang 4.50\ x 2.75\

  • The perfect solution for running HDMI cables, coaxial cables, standard A/V cables, speaker wires, DVI, S-Video, network RJ45 cables, and other low-voltage cables through walls to flat panel TVs, gaming systems, or home theatre systems.
  • Protects cables from accidental stripping and minimizes the exposure of wall openings. The low-profile design helps to achieve a look of professional wiring. Easily installed onto low-voltage mounting brackets.
  • Made of unbreakable polycarbonate thermoplastic material to provide durability, flexibility, and resilience to withstand hard impacts and heavy force.
  • ETL Listed - product has been tested and meets the high quality and safety standards of ETL.
Check Stock

Hyperice Normatec 3 - Recovery System with Patented Dynamic Compression Massage Technology (Normatec 3 Legs + Carry Case)

  • Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth.
  • Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth.
  • Detecting fuses and assigning current circuits..
  • Both transmitter and receiver display power level, code, battery, detected voltage type and value, and high-voltage alert..
  • Transmitter built in DC/AC voltage meter for linear measurement of 12-400V DC/AC voltage.
Check Stock

TOPGREENER Flexible Rubber Wall Grommet Insert with Decorator Wall Plate Pass Through Plate for Low-Voltage Cables Size 1-Gang 4.50 x 2.75 Polycarbonate Thermoplastic TG8901-2PCS White 2 Pack

  • The perfect solution for running low-voltage audio or video cables through walls to flat panel TVs, gaming systems, or home theatre systems.
  • Works with HDMI cables, coaxial cables, standard A/V cables, speaker wires, DVI, S-Video, network RJ45 cables, and other low-voltage cables.
  • Conceals cables and protects from accidental stripping.
  • Outer dimensions: 4.50” height x 2.75” length x 0.25” depth.
  • inner dimensions: 0.87” height x 0.50” length. Fits standard electrical single....
Check Stock

Fluke Networks PTNX8-DLX Pocket Toner NX8 Coax Cable Tester Deluxe Kit

  • Test VDV cables for continuity, AC and DC voltage, opens, shorts, 50-75 Ohm termination, and polarity/dial tone..
  • Interchangeable adapters to connect to any voice, data or video cables.
  • Eight ID caps for testing eight cables at once.
  • Auto shut-off and low-voltage circuit protection.
Check Stock

Wi4You Brush Wall Plate White Deco Bristle Single Gang Wall Plate with Mounting Bracket for Low Voltage Cable Pass Through White 2 Set

  • Brush wall plate for cables concealing easy - 1 gang Low Voltage wall plate for all low voltage cables of the panel TV and home theater system.
  • Manage cables with Single gang Cable wall plate - The decora brush wall plate makes your home will looks clean and neat, simple and smart.
  • SIngle Brush wall plate for TV - brush style wall cable plate perfect for all av low voltage cable wires ( RCA, HDMI, VGA, USB, Audio video,....
  • Brush cable wall plate - 2 pack decora cable outlet wall plate brush, mounting bracket wings, user manual, only simple steps to finish installing.
  • Pass through Cable Plate with Low Voltage Mounting Bracket is easy for installation,Please contact us for quick assistance if you meet any problem for....
Check Stock

PowerBridge TWO-CK Dual Outlet Recessed In-Wall Cable Management System with PowerConnect for Wall-Mounted Flat Screen LED, LCD, and Plasma TVs

  • ...it includes Two Power Outlets for mounting either two (2) TV's OR one (1) TV and one (1) Audio Visual Accessory Such as a Soundbar..
  • No more messy cables hanging down the wall between the TV and the floor. No electrician needed with snap together Power Connectors..
  • This system allows for Wall Mounted TV's to hide low-voltage cables and wires routed behind the wall for a clean look..
  • The Included In-Wall PowerConnect Cable and 6-foot Power Cord is code compliant. Does not include HDMI Cables or other Low Voltage Audio Visual Cables..
  • Included Recessed wall mount plates are hidden behind Flat Screen TV Mount and should work with the thinnest TV mounts and thinnest TV's on the market..
  • Top Rated Product with Simple Easy DIY Installation.DescriptionConceal cables and power for your wall mounted TV. Introducing the all new TWO-CK in-wall power and cable management system. Dual-gang size all-in-one design. Designed to simplify wiring behind wall-mounted flat-panel TV. This discreet system allows low voltage cables and wires to be routed through the wall for a clean look. Code Compliant to install power, includes hardware and helpful mounting template make the Two-CK the perfect do-it-yourself solution for any skill level, without the need for an electrician. No....
Check Stock

MPI Digital Magnetic Pull Test Kit – 44 Pound Capacity – Includes Scale, Reference Devices, Metal Spacers, Calibration Weight – NIST Certified Pull Test Kit

  • Detecting cables, electrical lines-water/gas supply pipelines buried in wall or earth.
  • Detecting interruptions and short circuit in cables and electrical lines buried in wall or earth.
  • Detecting fuses and assigning current circuits..
  • Both transmitter and receiver display power level, code, battery, detected voltage type and value, and high-voltage alert..
  • Transmitter built in DC/AC voltage meter for linear measurement of 12-400V DC/AC voltage.
Check Stock

VCE Brush Wall Plate Cable Pass Through Single Gang Decorator Wall Cover with Brush Opening for Low Voltage Cables in-Wall Cable Management for Wall Mount TV Home Theater System White 2-Pack

  • In Wall Cable Management - With VCE brush wall plates, you can quickly and easily run the cables through the wall without making a mess..
  • Cable Hider for Wall Mount TV - Perfect for HDMI cables, coaxial cables, standard A/V cables, speaker wires, network RJ45 cables, and other low-voltage cables..
  • Easy to set up, installation can be finished in a few minutes.You just need to insert the brush into the outer casing and place on the wall. (The Single Gang Low Voltage Mounting Bracket is sold separately.).
  • Run your cables cleanly and neatly through the wall, the package is equipped with mounting screws..
  • Note:The same size as a standard outlet wall plate.
  • DOESN'T FIT OLD WORK BOXES or Carlon brackets. The measurement for the mounting holes is 3.25", please confirm the size before ordering..
Check Stock