Reviews Mechanical Seal Ring

uxcell Water Pump Coil Spring Rubber Bellows Mechanical Shaft Seal 20mm BIA-20

  • Rotary Ring Size 32 x 20 x 38mm / 1.26" x 0.79" x 1.5"(OD*Inner D*T).
  • Overall Size : 3.5x 4,5cm / 1.4" x 1.77" (D*H).
Check Stock

Pacer Pumps 58-0714 12 S Series EPDM Water Pump Shaft Seal Kit With Seal and O-Ring

  • The Pacer Pumps water pump shaft seal kit 58-0714 12 includes the primary shaft seal and secondary O-ring..
  • This shaft seal kit is suited for all polyester Pacer S Series and Pacer Pumps with EPDM..
  • The 58-0714 12 Pacer shaft seal kit’s mechanical seal face is made from a durable carbon-ceramic, while the O-ring is made from wear-resistant EPDM..
  • As with all Pacer pump parts, the contents of the 58-0714 12 shaft seal kit are built for superior resistance to chemicals and corrosion for use in a range of commercial and residential applications..
  • The pump shaft seal kit is designed for easy installation onto the water pump for reduced downtime and increased efficiency..
Check Stock

Athena Parts Water Pump Gasket Kit with Bearings for KAWASAKI KX 250 F 2004-2008, SUZUKI RMZ 250 2004-2006, black

  • Includes every gasket, O-ring, bearing, and seal required to rebuild a water pump..
  • Typical kit includes the following -Bearings where applicable. -Rubber Seals. -Mechanical Water pump seal where applicable. -Side cover gasket. -Water pump gasket. -Snap rings located on water pump shaft. -Copper drain washers..
Check Stock

CR20-17 16mm Mechanical Seal, Stainless Steel Vertical Multistage Pump Mechanical Seal Replacement for Cleaning Systems

  • EASY TO INSTALL: Replacement pump seal suitable for multistage pump, easy and convenient installation..
  • STRONG TOLERANCE: The mechanical shaft seal is high pressure resistance, high temperature resistance, resistance to corrosion..
  • DURABLE: The mechanical seal made of high quality meterial, rust resistant and wear resistant, durable to last years of usage..
  • COMPACT SIZE: Mechanical seal replacement is c design for easy portability and storage. Outer Diameter: Approx.30.5mm/1.2in..
  • APPLICATION: Mechanical seal is suitable for water treatment systems, cleaning systems, seawater systems, ultrafiltration systems, reverse osmosis systems, which can also be used in swimming pools, bathrooms, acid and alkali transport..
Check Stock

O Rings 270 Pieces Seal Gasket Washer O Ring Assortment Set Kit 18 Sizes, Replacement O-Ring Kit Grommets Heavy Duty Professional for A/C Automotive, Mechanic,Tools & Home Repairs with Case - COPACHI

  • ... a sturdy plastic case with a size key to help identify which “O” ring is needed.
  • Save time and effort by keeping your workbench organized.
  • High-resistance Material: The O rings are made of Nitrile-butadiene rubber (NBR), offering great resistance to heat, powerful, durable and elastic.
  • These round cross-section mechanical gaskets ensure high protection against oils, fats, hydrocarbons, diluted acids.
  • Working Temperature Range: Used in every field of industry including aerospace, hydraulic, automotive or general engineering, these rings are wear-resistant with efficient mechanical qualities.
  • The rubber o rings are made of high quality nitrile rubber (NBR ), so assortment can resist -40°C (-40°F) to 120°C (248°F), to avoid leakness..
  • Cost-effective: There are 790 Pcs of various sizes both metric and imperial sizes with high-quality finishes.
  • 19 Different sizes provide a great choice for your needs.
  • Efficient and economical set will help you seal all liquid and gaseous media.
  • Endless Application: These doughnut-shaped faucets are highly useful in a huge range of applications, from appliances found around the home, cars, cameras, plumbing, scuba gear, paintball, pressure gauge, to gigantic machines used in manufacturing and even in the space shuttle....
Check Stock

Buna-N O-Ring Kit, 90A Durometer, 30 Sizes (Pack of 382)

  • [NBR O-ring]-NBR with good mechanical properties and high wear resistance. It has good resistance to many petroleum, grease, hydraulic oil, alcohol, mineral oil and grease. Nitrile rubber is susceptible to acetone, ether, ester, ozone, sunlight and weathering, so it should not be used in ozone-producing motors, welding equipment, or applications exposed to ultraviolet light..
  • [Circular Cross Section]-The nitrile rubber O-ring is round, and the cross section is round. Designed for various sealing applications. Pressure and fluid seals are usually provided between cylindrical overlapping mating surfaces, commonly found in engines, faucets, flanges, valves, and various cylinders..
  • [Features]-Soft and elastic O-ring, simple buckle, easy to install. Nitrile rubber O-rings can meet most pipeline, automotive and general maintenance needs..
  • [Easy to Use]-This nitrile rubber (NBR) sealing ring has abrasion resistance, pressure resistance, high temperature resistance, oil resistance and waterproof ring seal. You can use it in many places in your daily life and work. We have various thicknesses and sizes for you to choose from..
  • [Application]-Rubber O-rings are mainly used for power supplies, control boxes, universal power cord socket protection, electrical applian....
Check Stock

Ace Hydraulic Driven Centrifugal Pump 1.25" Suction x 1" Discharge USA Made Farmer Bob's Parts FMC-HYD-204

  • Suction 1-1/4" Discharge 1" 204 motor requires 4 GPM hydraulic flow on PC Closed and Open Center Systems Integral Needle Valve bypasses up to 9 GPM on Open Center Systems Standard with Viton Carbon/Ceramic Mechanical Seal Chemical Resistant Valox Impeller Cast Iron Pump Stainless Steel Shaft and Wear Ring Maximum Gallons Per Minute - 85 GPM Maximum PSI - 100 PSI Do Not Run Dry - Seal damage will result from running dry. Impeller damage may also occur if run dry for an extended period..
Check Stock

100 PCS 3/4 Inch PEX Cinch Clamps, 304 Stainless Steel PEX Fitting Clamps Pinch Clamps Ring Crimp Rings for PEX Tubing Pipe Fitting Connections (Silver -3/4inch(100PCS))

  • ✔【HIGH QUALITY MATERIAL】Pex crimp ring meets ASTM F2098 requirements that adopts 304 Premium Stainless steel material, which features sturdy and durable. Has good corrosion resistance, heat resistance, low-temperature strength, and mechanical properties. PEX barb fitting is an easy to install, low cost solution to connect PEX tubing. Compatible with All PEX Brands Manufactured with American Certification..
  • ✔【360-DEGREE SEAL PROTECTION】These interlocking rings provide a fast and reliable connection of all PEX pipes fittings. Form a complete 360-Degree watertight seal. The 360-degree narrow stepless clamp concentrates seal compression, rest secure in any PEX pipe using the system..
  • ✔【SPECIAL DESIGN】Special design for all PEX pipe connection fittings, Interlock Rings with 360 Stepless Design. This stepless ear clamp conforms to the ASTM International F2098 standard for securing PEX tubing to insert fittings. Universal used in any brand of crimp PEX pipe fittings or tubing..
  • ✔【WIDE APPLICATION】Widely used in all plumbing systems, such as water heater, air condition system, pipeline system, hydronic heating system, electrical plumbing, etc. PEX barb fittings are compatible for potable water distribution and hydronic heating applicatio....
Check Stock

AMT Pump 489G-95 High Head Washdown Pump, Cast Iron, 1 HP, 1-1/4' NPT Female Suction, 1' NPT Female Discharge Port

  • Closed impeller for use in pressure-boosting transfer and recirculation applications.
  • Not self-priming, requires flooded suction.
  • Cast iron with buna-n mechanical seal and O-ring.
  • Maximum operating temperature 180 degrees F.
  • 1-1/4" female NPT suction port, 1" female NPT discharge port.
Check Stock

AMT 315B-95 2x1.5 Cast Iron Heavy Duty Straight Centrifugal Pump Buna-N Seal 3hp 56J 3 Phase

  • For Liquid/Chemical Transfer, Heating/Cooling, Recirculation, Booster Service & Dirty Water.
  • 300 Series Stainless Steel Semi-Open Self-Cleaning Impeller.
  • Discharge Port Rotates in 90 Deg Increments.
  • 3 HP TEFC , 3 Phase, 230/460 VAC/60 Hz, 8/4 Full Load Amps, 56J Frame Motor.
Check Stock

AMT Pump 388F-97 Inline Centrifugal Pump, Bronze, 1/2 HP, 1 Phase, 115/230V, Curve A, 1-1/2\ NPT Female Suction & Discharge Ports

  • Self-cleaning impeller handles semi-solids up to 1/8" for use in liquid transfer and recirculation applications.
  • 1/2 hp, 1 phase, TEFC, 115/230V, 8/4 amp motor.
  • Bronze with buna-n mechanical seal and O-ring.
  • Not self-priming, requires flooded suction.
  • 1-1/2" female NPT suction port, 1-1/2" female NPT discharge port.
Check Stock

TrackStar Turnigy 13.5T Sensored Brushless Motor 3040KV Roar Approved

  • Premium Material: The hydraulic steering helm comes with high-strength aluminum alloy material, which is lightweight, anti-aging, corrosion-resistant,....
  • Optimal Hose Fitting: The adjustable stainless steel O-ring fittings will simplify the installation process and allow for simple reorientation after....
  • Considerate Details: The hydraulic helm pump is equipped with the replaceable shaft seal, the built-in lock valve, relieve valve, and air pocket.....
  • Complete Accessories: The hydraulic steering pump has a complete accessories kit for durable structure. It includes ball bearing piston race,-5 ORB....
  • Wide Application: This outboard helm pump is suitable for boats rated to a maximum of 300 HP. It can be used in mechanical/manual steering for yachts,....
Check Stock

AMT Pump 2761-95 Self-Priming Centrifugal Pump, Cast Iron, 2 HP, 1 Phase, 115/230V, Curve B, 2\ NPT Female Suction & Discharge Ports

  • Clog-resistant impeller handles semi-solids up to 3/8" diameter for use in waste water drainage and processing.
  • Built-in flapper/check valve permits self-priming to 20 feet.
  • Cast iron with buna-n mechanical seal and O-ring.
  • Maximum operating temperature 180 degrees F.
  • 2" female NPT suction port, 2" female NPT discharge port.
Check Stock