Reviews Maxline Nipple Fittings- BestItemr.com

MAXLINE COMPRESSED AIR TUBING MASTER KIT, 1' BENDABLE TUBING (M6580V, 300FT WITH SHUT OFF)

of 1-Inch Tubing, (3) Air Outlet Kits WITH SAFETY SHUT OFF BALL VALVES, (2) Tee Fittings, 1-Inch Straight Fitting, (30) Pipe Clips, Debar and Cutter Tool..
HIGHER FLOW RATE: This M6580V 1" Maxline 300FT Master Kit flows at 82 CFM at 300FT, versus the M7580 3/4" equivalent that flows at 39 CFM at 300FT..
175 PSI Maximum working pressure, 1-Inch inside diameter x 1.2-Inch outside diameter..
Compression style nickel plated brass fittings. Use only with Maxline 1-Inch system..
Recommended on Industrial sized air compressors 7.5HP through 15HP..

MaxLine COMPRESSED AIR TUBING piping system Master Kit 3/4" pipe x 300 FT M7580.
FREE SHIPPING - FREE SHIPPING - FREE SHIPPING - FREE SHIPPING.
kit includes 3/4" x 300ft tubing + cut & bevel tool - 3 Air outlet kits - 2 Tee fittings.
one 3/4" Maxline tubing x 3/4" Male NPT fitting - 20 mounting clips.
3/4" TUBING - 300FT total tubing length - Rated for any 10hp application and under.

of 3/4-Inch Tubing, (3) Air Outlet Kits, (2) Tee Fittings, 3/4-Inch Straight Fitting, (20) Pipe Clips, Debar and Cutter Tool.
175 psi maximum working pressure, 3/4-Inch inside diameter x 1-Inch outside diameter.
Compression style nickel plated brass fittings.
maximum from the air compressor, up to 4000 sq..

【Why do you need it】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Replacement bleed nipple for the front or rear brake lines..
【Banjo Bolt Bleed Screw】M10x1.0mm Motorcycle Brake Braking Caliper Bleed Screw Nipple with Dust Cap.
【Fitment】:Also be fitted to back of the master cylinders to bleed out trapped air. Easy installation, suitable for many motorcycle applications..
【High Quality】：This bleed screw is made of high quality aluminum, anodized coloring for rust and corrosion resistance, not easy to deform, not easy to damage, rust and corrosion resistance, durable..
【Excellent Perforamnce】:These fittings are extremely useful to help bleeding brakes which are problematic for air locks.Each component is precision-machined to exact tolerances for trouble-free.

of 1/2-inch tubing, (3) air outlet kits, compressor manifold kit, (5) elbow fittings, deburr and cutter tool.
175 psi maximum working pressure, 1/2-Inch inside diameter x 5/8-Inch outside diameter.
Compression style nickel plated brass fittings.
maximum from the air compressor, up to 2000 sq..

MaxLine Dual Outlet Port.Part Number: M8203.
This port has a 1" inlet that only works with 1" MaxLine tubing..
It features two 1/2" outlets that come out at an angle to make adding attachments convenient..
This outlet block also features a twist moisture drain on the bottom to help avoid excess water build up in your airlines..

MaxLINE 1" piping tee fitting Part Number M8012.
This MaxLINE Tee is specifically designed for the MaxLINE 1" tubing made by RapidAir and is great for adding extra tubing in multiple directions or adding extra air outlets..
This fitting is made of solid brass and has a double o-ring seal for a no leak connection..
It has split ring connections for easy disassembly if needed, and is rated for 175 PSI working pressure..
Solid Brass with Nickel Plating for Maximum Corrosion Resistance.

Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..

3 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

2 Pack of the MaxLine M8067 Elbow Fitting for 3/4" Tubing.
Nickel plated brass fitting guards against corrosion.
Double O-ring compression style fitting, tubing can be removed from fitting if needed.

1" MaxLINE compressed air piping 100ft tubing kit Part Number M6032.
This MaxLINE kit is a great solution for a compressed air piping system in a large garage/shop or a commercial application..
This is a high quality compressed air piping system..

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..