Reviews Master Pin

Schlage Compatible Rekeying Kit 7 Tool & 200 Pin Series

  • Create Key Alike and Master Key For SCHALGE, BALDWIN, DEXTER, EMTEK AND PEGASUS Keyed Entry Locks.
  • 7 Tools: Key gauge, plastic follower, deadbolt cap remover.
  • Copper follower, plug clip remover,twwezer, lock openning tool.
  • Bottom Pins #0-9: 200 pieces for each, Master Pin #2-7: 200 for each.
  • Parts: Plug clip 50, pin spring 100, deadbolt Spring 100, pin cover 50 , CK ball 200.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

COMeap 5 Pin to 3X 15 Pin SATA Hard Drive HDD Power Adapter Cable Only for Cooler Master Modular Power Supply 20-in(50cm)

  • 『5P - 15P SATA』5 pin port to plug into CoolerMaster PSU, 15 Pin SATA port to plug into hard drive, riser card or other devices with SATA port.
  • 『Connector』Connector A: 5 pin male ( Only compatible with Cooler Master PSUs with single 5 pin port as listed ), Connector B: 3x SATA 15 pin female.
  • 『Compatibility』Only compatible with Cooler Master PSUs with single 5 pin port such as: V550 V650 V750 V850 V700 V1000 V1200 Semi modular M520/M620 ,etc.，Corsair semi-modular HX520W/HX620W/HX650W.
  • 『Parameter』Gauge: 1007-18AWG(standard tin-coating copper wire), Length(including connectors): main 20inches(50cm)+secondary 6inches(15cm)+thridary 6inches(15cm) ,Between 2 SATA: 6 inches(15cm), Quantity: 1pcs, Self-adhesive tape*1pcs.
  • 『Note』This cable was only designed for some types of Cooler Master PSUs listed in the 3rd point, not compatible with other brand PSUs or types. If you use other incompatible brand PSUs or types, it will definitely burn or damage the hard drive and we won’t take any responsibility for wrongly using or installing. Please carefully check the compatible types and contact us if you are not sure if it supports your power supply.
Check Stock

PWM Fan Splitter Cable 2 Pack, PC 4 Pin Fan Power Extension Cable 1 to 3 Fan Splitter Converter [Sleeved Braided] for Computer ATX Case 4-Pin/3-Pin Cooling Fan Cable - 12 Inches

  • 【1 to 3 Fan Splitter Cable】4 Pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans..
  • 【Easy to use】The Fan Splitter Connects 3 Computer Case Fans to a Single Motherboard Fan Header, Compatible With 4 Pin and 3 Pin PMW Fan Connector.
  • 【Steady and Durable】Black sleeved nylon braided cable, more durable and make the inside of pc case looks more clean & tidy..
  • 【Broad Compatibility】3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with this PWM fan splitter cable..
  • 【Lifetime Warranty】Originated from confidence in product quality, we provide unconditional lifetime warranty ensures long-time satisfaction of your purchase and provide 24-hour service online..
Check Stock

Full Kits Biometric Fingerprint RFID Password Access Control Systems + 600lbs Force Electric EM Magnetic Lock +110V Power Supply+10 Cards and Key Fobs

  • MILRE - Part of the ALLEGION Family Brands (Made in Korea).
  • 3+1 Way Access: Passcode, Fingerprint, TagKey.
  • Max Access Memory: 1 Master PIN, 3 Master TagKeys, 10 User PIN, 50 User TagKeys, 50 User Fingerprints, 1 Guest PIN.
  • Full English Manual: User Manual, Installation Manual, Installation Template.
Check Stock

WEIGUZC Brake Booster Push Rod Adjustment Tool, Master Cylinder Push Rod Length Gauge for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • 【 PROFESSIONAL REPAIR TOOL 】 The master cylinder push rod length gauge is designed to measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin, helping you to solve your car's braking difficulties and obtain precise and safe braking..
  • 【 EASY TO USE 】 The two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use, making your measurement and maintenance process easier..
  • 【 QUALITY MATERIALS 】 The main body of the brake adjustment tool is made of high-quality aluminum alloy with anodized surface and the middle push rod is made of 304 stainless steel, durable and damage-resistant, will not rust and deform for ensuring your stable and reliable use..
  • 【 HOW TO USE 】 You can refer to the instructions in the picture or included in the package, and you can also search for 'master cylinder pin adjustment tool' on YouTube to get the installation video..
Check Stock

Star Wars Jedi Master Yoda Stylized Plush Character and Collectible Metal Enamel Pin | Plush Doll Measures 7 Inches Tall

  • LET THE FORCE GUIDE YOU: Search your heart, you'll find that the one thing you're missing is the ability to allow the Force to move through you. Allow Jedi Master Yoda to teach you the ways of the force in the form of this collectible plush character!.
  • A WHIMSICAL JEDI MASTER: This unique plush character offers a new visual on a Star Wars legend. Stylized in a fun and whimsical manner, Master Yoda is still just as wise as ever and will make the perfect companion on your road to becoming a Jedi..
  • QUALITY MATERIALS SUITED FOR THE JEDI COUNCIL: Crafted from some of the softest plush in the Star Wars galaxy, this 7-inch tall plush figure is sure to bring a smile to any Star Wars fan!.
  • TAKE YOUR STAR WARS OBSESSIONS EVERYWHERe: Whether you're toting around Master Yoda in your backpack like Luke Skywalker, or you prefer to carry him around in a more discreet manner using the included bonus collector pin, this Yoda gift set offers fans the ultimate Star Wars experience!.
  • OFFICIAL STAR WARS COLLECTIBLES: Both the Master Yoda plush figure and collectible enamel pin are apart of the official collectible Star Wars universe! Take home your piece of the galaxy far, far away, today!.
Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

  • ...Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
  • Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
  • High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, and the middle push rod is made of 304 stainless steel, and sliver phospha....
Check Stock

Cooler Master 1-to-5 ARGB Splitter Cable / 5V - Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support(ARGB 1-to-5 Splitter)

  • Cooler Master 1-to-5 ARGB Splitter Cable，NOT support 12V RGB, Only support 5V RGB.
  • Support 3-pin Addressable RGB - LED Sync Cable for MasterFan/MasterLiquid ARGB Series Support.
  • 3-pin ARGB Header compatibility,2ft/60cm Long and flexible material makes it easy for cable routing. Keep it effortless and hassle free..
  • NOTE: 1. (DO NOT connect an Addressable RGB(ARGB/Digital RGB +5V) Fan to a Non-Addressable RGB(Standard +12V) motherboard header or RGB controller. 2. Beyond the look, Cooler Master provides quality. With high quality material, keep your build reliable and flawless. Certified Compatible with Asus Aura, ASRock RGB, Gigabyte Fusion, MSI RGB..
  • Splitter: - Connection Type: Straight Through Wiring (Passive Wiring) - Connector A: 3-pin RGB LED Connector Female - Connector B: 3-pin RGB LED Connector Male.
Check Stock

Real Avid Accu-Punch Hammer & Long Punches Set with Oversized Master Bench Block

  • ESSENTIAL WORKBENCH TOOLS designed with Real Avid’s ingenuity: Accu-Punch Hammer and LONG PUNCHES Set paired up with advanced, specialized Master Bench Block.
  • AUXILIARY TOOLS: Proprietary Pin Alignment Tool and non-marring finishing punch to make common maintenance, modification and repair tasks hassle-free.
  • ACCU-PUNCH HAMMER: adjust to the situation with interchangeable hammer heads: easily switch between steel, brass, rubber, and nylon.
  • grip confidently thanks to ergonomic, rubberized handle – all to allow for maximum control and precision while tapping pins.
  • SET OF SPECIALIZED, LONG PUNCHES: Special Application, Long Punches – selection of nickel-plated steel, standard flat punches and roll pin punches, featuring extended bolt catch pin and magnetized roll pin starter. Designed to fit flush against flat surface, such as receiver..
  • MASTER BENCH BLOCK: large, non-slip, steady work surface, helps protect finish and firearm itself from causing accidental damage. MAGNETIC: captures the small pins – prevents losing pins. Includes magnetic storage solution for common size pins.
  • ADVANCED AND SPECIALIZED: purposefully contoured for standard parts and components. Allows you to work efficiently and confidently. Maximum comfort and maxmum stability f....
Check Stock

BROCKHAGE Reverse Action Tweezers

  • Schlage Compatible. Fits Schlage SC, Baldwin, Dexter, Emtek, Pegasus & Others Locks..
  • Bottom pins #0 to #9 each 200 PC, Master Pins #2 to #7 each 200 PC.
  • Top pins 200 PC, Plug Clips 100 PC, Pin springs 100 PC, Deadbolt springs 100 PC.
  • Pin Covers 50 PC, CK Ball 100 PC, Cap Removal, Follower Bar, Key Gauge Decoder, Pin Clamp and Etc..
  • The deadbolt cap remover has 12 pins, it works for most of schlage deadbolts. However, there are some of schlage deadbolts that may need a 14 pin remover..
Check Stock

Kwikset Keyway Rekey Locksmith Rekeying Pin Key Tool Key Kit - 200 Pieces, Value Pack

  • Locksmith Value Pack! Master Pins 1-6 (each 200 pieces) Bottom pins 1-6 (each 200 pieces) Top Pin (200 Pieces).
  • For Kwikset brand locks. CK Ball (200 pieces) Pin Cover (50 pieces) Deadbolt Spring (100 pieces).
  • Pin Spring (100 pieces) Plug Clip (50 pieces) Cylinder Cap (50 pieces).
  • Plug Follower, Locking Nut, Tool Knob, Catch Tool, Pickle Fork.
Check Stock

Hard Enamel Pins Set of 3 Styles Fantasy RPG Game Badge D20 Dice Brooches Perfect for TTRPG Lovers and Dungeon Master (Pack B)

  • SET INCLUDES - Comes with 1 MISADVENTURE AWAUTS! D20 pin, 1 DUNGEON MASTER D20 Dice pin and 1 HOW I ROLL pin..
  • MATERIAL - Zinc alloy and hard enamel filled..
  • SIZE - Approx 30mm (1.18"). Rubber back or locking back available..
  • DECORATION - Perfect for your favorite jackets, shirts, bags, hats, and more. Mix and match with our other pins and patches to create a collection as unique as you are!.
  • IDEAL GIFT - An ideal gift for who loves D&D and collects pins. No matter if you're a bard, paladin or the dungeon master, these DND pins are the perfect gift for your party!.
Check Stock