Reviews Marking Requirements

Placard Vinyl Numbering Kit - 3.5'H Permanent Adhesive Clear-Back Vinyl with Black Numbers - 50 Decals of Numbers 0-9, 500 Total Per Kit - Complies with DOT Regulations - J. J. Keller & Associates

  • Durable vinyl numbers helps you satisfy requirements for marking USDOT numbers on motor vehicles..
  • Use these 3-1/2" numbers on blank placards, sqaure-on-point markings or motor vehicles to comply with DOT hazmat ID number marking requirements..
  • Convenient to use for indoor or outdoor applications. Each sticker measures 4" x 2-1/8".
  • Placard numbers are printed in black ink on clear vinyl with permanent adhesive backing..
  • Each kit contains a total of 500 numbers: 10 packages of 50 pressure-sensitive number decals (numbers 0 through 9)..
Check Stock

Antique Markers

  • One-sided printable for wire identification and insulation purposes.
  • Fit snugly around wires for maximum insulation protection and permanent identification.
  • Meets the rigid insulating material requirements and physical properties of MIL-DTL-23053/5 Class 1, MIL-M-81531, MIL-STD-202F, METHOD 215, and UL224 when printed with R5000 dot matrix and R4300 and R4502S (for black sleeves only) thermal transfer ribbons.
  • Meets the material and physical property requirements of SAE AMS-DTL-23053/5C (Class 1) for Insulation Sleeving and SAE AS-81531 for Marking of Electrical Insulating Materials when printed with R5000 Series dot matrix, R4300, R6600, R4502S, or R6700 Series thermal transfer ribbons.
Check Stock

Emraw Super Great Assorted Color 3/4' Round Labels - Includes: Green, Yellow & Red - Great for School, Home & Office – 306 Labels Per Pack - (3-Pack)

  • ✓ The Emraw Assorted Color 3/4" Round Label (306/Pack) comes very handy at the time of marking or labeling anything which makes the product a very useful one..
  • ✓ SPECS: Our round circle label stickers come in a very economical pack of a total of 306 labels in it. The labels are available in different colors making it easier and convenient for the users..
  • ✓ QUALITY: Our colour round labels are made of extremely good quality material so that the users do not have to face any kinds of troubles at the time of using the labels..
  • ✓ DESIGN: The design of the round labels is designed in such a way by the manufacturers that it perfectly fits the requirements of the users. These labels are great for the intended purpose for which they are designed..
  • ✓ USES: These round labels can be ideally used for the purpose of labelling, marking, highlighting and a number of other similar uses. The labels are suitable enough to meet the requirements of the users..
Check Stock

Cordova Pro Pack 1.5-MIL Yellow Caution Barricade Tape, 3 in. x 1000 ft. Roll, 12-Pack

  • CAUTION BARRICADE TAPE: Bright yellow caution tape with bold black lettering offers high visibility and contrast, 1.5-mil thick.
  • VERSATILE APPLICATIONS: Ideal for barricading off construction sites, physical hazards, slippery areas, wet paint, freshly poured concrete, and more.
  • DURABLE AND WEATHER-RESISTANT: Made with UV-resistant, non-toxic, non-flammable, and lead-free flexible polyurethane for added safety and durability.
  • MEETS HAZARD MARKING REQUIREMENTS: Meets OSHA 1910.44 standard for marking physical hazards.
  • PACK OF 12 ROLLS: Each extra large roll measures 3 in. wide x 1000 ft. long, and this pack includes 12 rolls to provide barricading for multiple projects.
Check Stock

Ivory Soap Personal Bar 3.1 Ounce

  • Ivory Soap Simply Ivory 3 Bars 3.1 Ounce Each.
  • Electronic devices may be subject to the Federal Communications Commission’s testing, equipment authorization, and device marking and labeling requirements..
  • Offers a simple, effective clean for the entire family.
Check Stock

Glass Low Form Beaker Set, 6 Sizes - 10, 50, 100, 250, 500, and 1L, 3.3 Borosilicate Glass, Karter Scientific

  • ASTM Specification E960, Type I requirements.
Check Stock

Homaisson Mortise Gauge, Woodworking Scriber Marking Tool 6.4in Ebony Mortise Square Gauge, Brass Screw Type Sliding Mark Scraper, Adjustable Head Meter Carpentry Marker

  • 3. Wide Adjustment Range of Nail Space: The distance between 2 nails can be adjusted by turning the screw knob on the top, which is easy to operate, and the adjustment range of 0.2”-4” is wide enough to meet your needs for different wood marking requirements..
  • 4. Smooth Brass Slider: The brass adjustment sliding bar slides smoothly, with a small handle on the end that adopts ergonomic design for easy pulling of the slider. It is firmly fixed on the guide rail by tightening the screw, so displacement will not happen when in use..
  • 5. Professional Woodworking Tool: The woodworking scriber is 6.4 inches in total length, with fine workmanship and smooth surface, which will not hurt your hands during use, helping you complete the carpentry work quickly. It is a professional woodworking tool..
Check Stock

Karter Scientific 214T2, 3.3 Boro, Griffin Low Form, Glass Beaker Set - 3 Sizes - 50ml, 100ml, 250ml

  • ASTM Specification E960, Type I requirements.
Check Stock

kiniza 4 Rolls 4 mm 1/8” Whiteboard Tape, Graphic Tape Pinstripe Tape Dry Erase Board Tape Adhesive Graphic Art Tape Grid Marking Tape, 216 Feet Long per Roll (Black)

  • ...You can also cut it into the proper length according to your demands..
  • [ Package Information ] You will receive 4 rolls dry erase board tape in black in this package, each measured about 3 mm / 0.11 inch in width and 66 m / 216 feet in length, which are enough to meet your requirements for marking and lining..
  • [ Wide Application ] Our black pinstripe tape is suitable for various surface like whiteboard, blackboard, plastic, glass, paper, etc. Besides, you can use our grid marking tapes to distinguish things and mark your paper works, line charts, guide lines, grid creating, marking your paper or using as craft tapes on your scrapbooks, notebooks, journals, paper crafts or fashion designs..
Check Stock

Labvida Griffin Low Form Glass Beaker, Vol.5000ml, 3.3 Borosilicate with Printed Graduation, LVA016

  • Material: 3.3 Borosilicate Glass, Uniform wall thickness.
  • Convenient to use: Low Form with printed graduation, Extra large marking spot.
  • Meet Standard Specification for Laboratory Glass Beakers: ASTM Specification E960, Type I requirements.
Check Stock

Karter Scientific, 3.3 Boro, Griffin Low Form, Glass Beaker Set - 5 Sizes - 50ml, 100ml, 250ml, 500ml, 1000ml

  • ASTM Specification E960, Type I requirements.
Check Stock

WOD RTC7 Engineering Grade Retro Reflective Tape Silver/White, 1 inch Wide x 30 ft. Outdoor Waterproof Safety Reflector Tape for Autos, Bikes, Camper, and Boat Striping, and Traffic Signage Marking

  • ...et long perfect length for one time projects to increase visibility and safety in areas where is needed. The adhesive has a dwell time of 24 hours, but reaches 75% of its adhesiveness after 15 minutes..
  • CERTIFICATIONS AND USES - Reflective marking tape is designed to sustain 7-years of durability, exceeding the requirements of ASTM D4956 (Type 1) and EN-12899 RA1, and meeting the requirements of LS-300C (Reflectivity 1 Class 1) and FP-85 (Type II). Used for work zone devices and non-critical signs where retroreflection is necessary.
  • caution tape, dot tape, on motorcycles, on trailers, on clothing, on vehicles, for construction, marking, safety signs, lettering, and graphics..
  • ENHANCE SAFETY - WOD RTC7 Striping tape is designed primarily for permanent and temporary traffic signage for high visibility to keep you safe. It is easy to apply (applications surface should be flat and free of any debris) to trucks, trailers, vehicles, and anywhere you need to increase detection distance..
  • COLORS FOR SAFETY - Available in 6 different solid colors: Blue, Green Orange, Red, Yellow, and Silver/White. Our tape is commonly used to embellish traffic signage or alert pedestrians to hazardous obstacles. Choose the color that meets your need..
Check Stock

Labvida 2pcs of Narrow Mouth Glass Erlenmeyer Flasks, Vol.1000ml, 3.3 Borocilicate with Printed Graduation, LVC005

  • Material: Made of high quality 3.3 Borosilicate glass, Uniform wall thickness.
  • Convenient to use: Printed graduation, Extra large marking spot.
  • Meet Standard Specification: ASTM Specification E960, Type I requirements.
Check Stock