Reviews Marine Stainless Toggle Bolts 2

Toggle Bolt HSCGIN 24PCS M4 Stainless Steel Toggle Bolt and Wing Nut Kit Round Head Butterfly Drywall Anchor Toggle Wing Nut Bolt

  • Toggle Bolt and Wing Nut Kit. Color: Silver. Material: Stainless Steel..
  • Sturdy and well-made: high quality stainless steel anchors, environmentally friendly materials. Stainless steel can be used in wet environments and will last for a long time. We offer great toggle bolt kits..
  • How to apply this kit: First, you'll need to drill a hole (large enough to go through the folded spring wings), then thread these toggle bolts through the hole. At this point the wings are released and clamped inside, then the bolts are pulled down to tighten, taking care to leave enough room for the wings to loosen. Finally, it is best to use an electric screwdriver to screw in the screws..
  • Wide compatibility: widely used in hollow substrates such as hollow brick, gypsum board, fiber cement board, wood board, etc., suitable for installing lamps, curtain rods, photo frames, coat racks, power switches and other lamps..
Check Stock

Joinfworld Marine Toggle Switch 12V DC 30A Waterproof Toggle Switch 250V AC 15A Heavy Duty with Weatherproof Boot Cover SPST ON/Off 2 Pin for Auto Car Truck Boat -4Pcs

  • ON/OFF Toggle Switch: This is an SPST toggle switch, 2 pin switch, 2 position design. When turn the switch ON, it will stay at ON position until manually switch it off..
  • 15A 250V AC, heavy duty toggle switch 12v design..
  • Mounting Hole Size: The mounting hole size of this 12 volt toggle switch is 12mm (0.47 inch)..
  • Feature: 12v toggle switch with screw terminal. There is a gap on this 2 position toggle switch to fix the ON/OFF plate and prevent the plate from spinning on the switch. In addition, for becoming waterproof toggle switch 12v marine, this 2 way switch will come with a toggle switch cover..
  • Waterproof: The marine toggle rocker switch can reach IP65 waterproof rating after installing the rubber boot cover, suitable for automotive, car, truck, boat, yacht, DIY projects, household appliances, etc..
Check Stock

Amarine Made Pair of Stainless Steel Marine Boat Stern Bow Eye Tie Down U Bolt (Silver, 3/8' Dia - 3-1/2' Thread Lenght)

  • 【Durable】Machined AISI 304 stainless steel, Come with adjustable finished nuts.Amarine-made Bow Eyes come with adjustable finished nuts as compared to the crimped ring used on most bow eyes..
  • 【Package Included】: 2pcs Boat stern bow eye tie down U bolts,Nuts and Washers.(Includes 4 flanges and all 8 nuts.).
  • 【Heavy Duty】The Marine Boat Bow Eye Stern Eye U Bolt Tie Down is made from marine grade stainless steel,very durable.max safe load is 3,500 lbs.
  • 【Easy to Install】:The U bolts had all the necessary hardware (Washers and nuts) to make it a easy and lasting installation..
  • 【Size】1/2" and 3/8" optional, more size see pictures(We have different sizes Marine Boat stern bow eyes for your choose.).
Check Stock

Hilitchi 24-Pcs 1/4\ 3/16\ 1/8\ Molly and Toggle Bolt Assortment Kit Zinc Plated Steel Philips Round Head Toggle Wing Nut Bolt Set

  • Size--1/8x2-inch,includes:50 packs 1/8x2-inch toggle bolt and 50packs wing nut..
  • Drywall toggle bolt made of high quality zinc plated carbon steel are rust and corrosion resistant, durable enough to hang items.Maximum weight capacity is 22 pounds.
  • The collapsible spring-style wing design allows you to fold the wing so it can be placed in the borehole. The wing will open behind the gypsum board to provide reliable fixation..
  • Our 1/8 in toggle bolts can be used for hollow bricks, gypsum board, cement fiberboard, wooden boards and other hollow substrates, suitable for installing lamps, curtain rods, photo frames, coat racks, power switches, and more..
  • Easy to install--You need to drill a hole (large enough to pass through the collapsed spring wing), and then poke these drywall toggle bolts through the hole. At this time, the wing will be loosened and clamped inside, and then the bolts will be tightened back. Please note that you should leave enough space to release the wing. Finally, it is best to use an electric screwdriver to screw in the bolts..
Check Stock

Bonost 48 Pcs Toggle Bolts - 1/4 3/16 1/8 Inch Butterfly Toggle Anchors for Drywall - Toggle Bolt Assortment Kit with Matching Wing Nuts Hex Nuts Washers

  • 【What You Get】: 48pcs toggle bolts and wing nut kit, including 1/4-inch: 12pcs, 3/16-inch: 16pcs, 1/8-inch: 20pcs. We also provide matching hex nuts and washers, making it easier for you to hang mirrors or pictures..
  • 【High-quality Material】: Made of premium carbon steel, these toggle bolts for drywall are corrosion resistant, durable enough to meet different occasions. Zinc coatings make the toggle bolts have a longer service time..
  • 【Easy to Install】: 1. Drill a hole required for installation.
  • 3. Place wing unit on toggle bolt. Thread the bolt to a depth of about four or five threads.
  • 4. Install your toggle bolt and then tighten the fastener clockwise..
  • 【Wide Applications】: Butterfly anchors for drywall have spring-loaded wings that open inside the hollow wall, dispersing the weight of the secured item over a larger area. Widely used in hollow block, gypsum wallboard and more..
  • 【Durable & Sturdy Case】: Comes with no-mix compartments and carrying handle, the case is easy to carry and store toggle anchors. Made of durable construction and heavy duty material, the case offers long-lasting usage..
Check Stock

KURUI Heavy Duty Hollow Wall Anchors for Drywall 24Pc Toggle Bolts and Wing Nut Kit Hollow Drywall Anchors and Screws Assortment Set 3 Sizes Butterfly Anchors 1/8in 3/16in 1/4in

  • MULTIPLE SIZE OPTIONS – This drywall anchors and wing nut kit contains toggle bolts set in 3 different sizes – 1/8in, 3/16in, 1/4in for your choice according to your actual mounting and load bearing requirements..
  • PREMIUM MATERIAL, EXCELLENT PERFORMANCE – The toggle bolts and nuts in each size are constructed with new high-strength steel, which ensures outstanding strength and hardness. Finished with multi-layer galvanization, these drywall anchors and nuts are rustproof and corrosion resistant..
  • FOR HEAVY-DUTY HANGING TASKS – The drywall anchors are designed with spreading butterfly wing nuts, when knocked in hollow walls the wings will automatically spread to increase the area of the thrust surface, which enhances the load bearing of the toggle bolts for heavy-duty hanging tasks..
  • WIDELY APPLICABLE – Our toggle bolts assortment kit with multiple size options allows you to easily hang items such as television, painting, mirror, shelves, pictures onto hollow walls safely and with ease..
  • WHAT YOU GET – The package includes 12pcs 1/8in toggle bolts and nuts set, 6pcs 3/16in drywall anchors and nuts set, 4pcs 1/4in heavy-duty wall anchors, all the piece are well packaged in a beautiful clear plastic box. If you have any question about this toggl....
Check Stock

ZOMCHAIN Marine Flag Pole with Base, Flag Pole Holder, 316 Stainless Steel Flag Pole Set for Boat, Yacht, Truck and Yard - Flag Pole 23.62inch/60cm

  • ✔Anti-Corrosion Materials: Flag Pole, Mount and All Installation Accessories are made of precision cast 316 marine grade stainless steel, highly polished to a beautiful mirror-like finish..
  • ✔ 316 Stainless steel: Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable, which can stand up to kinds of weather. Suit for installation on Boat, Yacht, Truck and RV..
  • ✔ Size：The mount diameter is 2.75in / 7cm, Flagpole length 23.62in/60cm, the diameter of screw hole is 0.24in / 6mm, best use 0.24in / 6mm diameter drill..
  • ✔ It allows mounting at 80-degree angles.Both screws and bolts are designed to be lengthened to make the installation more stable and firm..
  • ✔ Packaging: There are a kinds of screw fittings for your choice, Screws x3, Bolts x3, Nuts x3, hexagon bar wrench x1, all 316 Stainless Steel..
Check Stock

4PIECES of Quick Release Pin 1/4\ Diameter, Usable Length 2\(50mm), Total Length 2-1/2\(63mm) Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware

  • * Quick Release Pin made of Marine Grade 316 Stainless Steel, very strong and resistant to corrosion. Solid body construction with direct spring loaded ball provides dependable operating qualities..
  • * SIZE:Overall Length 2-1/2"(63mm), Usable Length: 2"(50MM), 1/4"(6.3mm) Diameter.
  • * Can be applied in bimini tops, boat tops , support poles, deck hinge marine mountain seat, stainless steel pipe clip, ship outfitting, etc.
  • * Spring loaded pins slidable springs with toggle pin, Help to replace different size of bimini tops easily.
  • *WORRY-FREE SERVICE：Every production shipment tested and certified, 24-Hour Customer Supports,30-Day Money Back Guaranteed..
Check Stock

4 Pack Quick Release Pin 1/4\ Diameter w/Drop Cam & Spring - Lanyard Prevents Loss, Full 316 Stainless Steel, Bimini Top Pin, Marine Hardware, Free Installation Screws

  • Quick Release Pin for bimini top, boat tops and support poles, deck hinge etc.
  • SIZE:1-1/2"(38mm) Long, 5/16"(7.5mm) Wide, 1/4"(6.3mm) Diameter.
  • All parts are made of Marine grade 316 stainless steel, Excellent seawater corrosion resistance and durable.
  • Spring loaded pins slidable springs with toggle pin, Help to replace different size of bimini tops easily.
  • Can be used for marine mountain seat, stainless steel pipe clip, ship outfitting, shipbuilding etc.
Check Stock

QUALIHOME Spring Toggle Bolt Assortments Kit - Toggle Drywall Anchors Kit for Hanging Items w/Hollow Walls & Ceilings - 1/8” x 2” 3/16” x 3’’ 1/4” x 3 Sheetrock Anchor for Frames Shelves & More

  • Sturdy Toggle Bolts: Need to hang something heavy on the wall? Spring toggle bolt anchors are what you need! Toggle bolts for drywall As they can support twice as much load in a smaller hole than regular wing anchors, our toggle bolts are the most reliable anchors for plaster, concrete, hollow, drywall, & more.
  • Heavy-Duty Steel Material: Our wall anchors are made of high-quality steel, This sheetrock anchor offers strength, durability, and good resistance to rust and corrosion and great option for picture hanging anchors. Unlike plastic, our steel anchor bolts won't crack when tightened, can support heavier weights, and will retain their stability.
  • Spring Wing Design: The plaster wall anchor’s two-piece fastening system consists of a strong screw and a foldable spring wing toggle. With the wings that open inside the wall, the weight of the fastened object is evenly distributed across a large surface, making  wall anchors for shelves a reliable choice for securing heavy items to walls..
  • Easy To Install: Installing the heavy-duty wall anchors is a breeze! We have included DIY instructions for easily installing sheetrock anchors.
  • no special skills are required. To install, first make a hole using a screwdriver/drill, insert the toggle bolt through ....
Check Stock

Sowtowe Cable Railing Hardware, 20 Pairs Stainless Steel Cable Railing Kit,for 3/16 Cable Railing System, Adjustable Angle,T316 Marine Grade

  • Fit for 3/16 cable railing,This adjustable angle cable railing kit can be freely adjusted between 0 and 180 degrees, suitable for outdoor or indoor use.
  • The railing kit is made of high quality marine grade T316 stainless steel Thick Plate, which is rust-proof, durable and beautiful and easy to maintain.
  • This kit needs to be connected to the cable using a hydraulic crimping machine, it can be used for deck railing and garden fences, inclined stair railing or horizontal cable guardrail.
  • Cable railing hardware Kit, can be used in cable railing systems of various angles, for wood post and metal post,3/16" inner diameter, ideal for connecting to 3/16 inch stainless steel cable to wood post and metal post.
  • This product includes 20 Pcs Deck Toggle Turnbuckles, 20 Pcs Deck Toggle Ends and 82 Pcs (2 spare) of stainless steel countersunk head screws and 1 pcs drill bit for wooden post, 1 pcs tightening rod, 1 multifunctional small wrench..
Check Stock

Five Oceans Anchor Windlass Up/Down Toggle Switch Panel, Pre-Wired, 12 Volts, SPDT 3-Terminal Switch, AISI316 Stainless Steel Plate, Mounting Hardware Included, FO-3289

  • This Five Oceans Anchor Windlass Up/Down Toggle Switch Panel is a SPDT three-terminal switch that works with 12-volts..
  • Up/Down toggle switch for safe windlass operation..
  • Mounting Hardware - Two(2) screws - is included..
  • This Anchor Windlass Switch Panel was designed to Resist the Marine Conditions because it is built with High-Grade Marine materials..
  • Dimensions are: Width 1-3/4 inches (44mm) x Length 2-3/4 inches (70mm) x Depth 2-3/8 inches (60mm). FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

Aexit Blue Zinc Anchors Plated Screw Type Car Repair Expansion Bolt Stud Anchors M10x80mm 4pcs

  • EASY INSTALL TOGGLE BOLTS - These Elephant ANCHORS Drywall anchors mounting kit from CondoMounts are perfect for Wall and Ceiling mounting and feature the newer version of Wing/Toggle bolts. This kit is so simple to use that installation is typically 7x faster than normal! Also, our kit makes a smaller hole that holds more!.
  • A Revolution In Mounting - Our Heavy Duty 19-Piece Mounting Kit replaces the old fashioned toggle wings, wing anchor, molly bolts, and butterfly anchors system and can be pre-installed without using a bolt since our anchors won't fall off and into your wall..
  • Most Types Of Wall & Ceilings - Can be used in various hollow walls and ceiling 3/8" to 3" thick drywall, mdf, plywood, sheetrock, hollow block, plaster, tiles, Granite, plasterboard, sheet rock, gypsum board, cement board,.
  • Other Heavy Duty Mounting Needs - Perfect for hanging curtain rods, coat racks, bookshelves, hanging cabinets, sinks, curtain rods, bookshelf, racks, coat racks..
  • HEAVY DUTY DRYWALL MOUNTING KIT- The CondoMounts Heavy Duty 19-Piece 90lbs Drywall Mounting Kit includes 6 pieces of 3/16 hollow wall Elephant Toggle Anchors, 6 individual 3/16 x 2’’ screws, and one titanium coated hex shank ½’’ Drill Bit, providing everything needed for an easy mounting e....
Check Stock