Reviews Marine Fuel Oil

BJTDLLX Boat Fuel Tank, 24L 6Gallon Gas Can Marine Outboard Motor Fuel Tank, Portable 6gal Boat Gas Tank Fueling Tank Plastic Tank Outboard Motor Boat Accessories for 2-4Stroke Outboard Engine

  • 【High Quality Material】Our marine fuel tank is made of high density plastic (polyethylene) material, which has the characteristics of impact resistance, corrosion resistance, acid resistance and so on. It springs back naturally without permanent deformation. In addition, there will be no electric sparks to cause explosions during friction and impact..
  • 【Portable Design】 The three-dimensional textured surface of the 24L/6Gallon marine fuel tank not only increases the aesthetics of the gas tank, but also optimizes the grip feel, so that the force is even and the feel is not restricted. Equipped with an I-shaped handle, which is more ergonomic, convenient and fast, easy to carry and store..
  • 【Fuel Gauge】The fuel gauge allows you to clearly see the change of the fuel tank and the remaining oil level, and replenish it in time. The integrated design of the fuel tank cover and the intake valve makes it more convenient to use. The air inlet and oil outlet are separated to prevent oil from overflowing. Moreover, the pure copper interface process is more complete and the service life is longer..
Check Stock

KCRET Portable Boat Fuel Tank with Hose Connector for Marine Outboard Motor Fuel Tank- Red (3 Gallon (12L))

  • 【High Quality Marine Fuel Tank】This plastic stable fuel tank is made of durable, light ,high density polyethylene(will not chip, crack or rust),easy to carry, easy to store, safe and strong, suitable for gasoline..
  • 【 Large Capacity 】Boat Fuel Tank have 3 gallon (12 L) and 6.3 Gallon (24L)，diameter of tank opening is 1-1/2", this is an outboard fuel tank that can be used for the outboard engines of Yamaha..
  • 【Two Designs of the Fuel Tank Cover】The fuel tank cover can be sealed and deflated, screw cap with vent on top, including fuel collection pipe and 1/4" NPT internal threaded fuel tank accessories, molded handle on top of fuel tank..
  • 【Come with An Oil Volume Indicator】Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the fuel tank to ensure clean fuel..
  • 【 Complete Assemble Set】The fuel tank is a complete assembly, which includes a fuel connector with a fuel gauge and a fuel cap with an internal filter. The filter tank contains a strainer to filte....
Check Stock

Marine Power G-Force Fuel Pump Filter 396007

  • Fuel Filter/Water Separator for all Marine Power G-Force fuel systems.
  • Filter is located in aluminum G-Force fuel system canister. Canister can be removed with oil filter wrench to access fuel filter.
Check Stock

61N-24560-00-00 Fuel Filter for Yamaha Sierra Marine Outboard 9.9HP 15HP 20HP 25HP 30HP 40HP 55HP 48HP 50HP 55HP 60HP 70HP 75HP 90HP 2 4 stroke fuel filter 18-79910

  • Replace part number: Sierra 18-79910, 118-79910, 61N-24560-00-00, 61N-24560-00, 61N-24560-10, 655-24560-00, 655-24560-01, Replaces Suzuki 5410-93401, 15410-93411 25-40 HP fuel filter for yamaha boat motor.
  • Compatibility with: For Yamaha 9.9HP stroke marine boat fuel filter, Yamaha15HP stroke marine boat fuel filter, Yamaha 20HP stroke marine boat fuel filter, Yamaha 25HP stroke marine boat fuel filter, Yamaha 30HP stroke marine boat fuel filter, Yamaha 40HP stroke marine boat fuel filter.
  • Compatibility with: Yamaha 50HP stroke marine boat fuel filter, Yamaha 55HP stroke marine boat fuel filter, Yamaha 60HP stroke marine boat fuel filter, Yamaha 70HP stroke marine boat fuel filter, Yamaha 75HP stroke marine boat fuel filter, Yamaha 90HP stroke marine boat fuel filter.
  • OEM Perfect: Fuel Filter 61N-24560-00 18-79910 5410-93401 for Yamaha Outboard Motor built to stringent OE specifications. and is 100% factory tested. Superior and stable performance, and high work efficiency..
  • Fuel filter assembly for Yamaha: A fuel filter is a filter in a fuel line that screens out dirt and rust particles from the fuel, and is normally made into cartridges containing a filter paper. Replacing the fuel filter regularly prevents those particles and impurities from reachi....
Check Stock

Mercruiser Engine Oil Change and Sterndrive Gear Lube Maintenance Kit

  • Fits all Mercruiser sterndrive GM engines (except 4.3L V6 without remote oil filter).
  • Includes Water Separating Fuel Filter 35-802893T & Oil Filter 35-866340K01.
  • Includes 2-4-C Marine Grease 92-802859A1.
  • Includes SAE 25W-40 Marine Engine Oil 92-8M0078628 and 92-8M0078627.
  • Includes 3 Quarts High Performance Gear Lube 92-858064K01 with Washers and Gear Lube Fill Pump.
Check Stock

Portable Boat Fuel Tank 24L 6 Gallon Marine Outboard Motor Fueling Tank Plastic Tank Compatible with Kayaks, Small/Large Boats, Inflatables and Canoes (6 Gal Fuel Tank)

  • ...king the force is even and the hand is not restrained. Equipped with an I-shaped lifting handle, which is more ergonomic, convenient and fast, easy to carry and store..
  • 【Easy to Fill】Portable boat gas tank features a fine mesh input spout, so you can fill this portable marine fuel tank without worrying about gunk and grime getting in the gasoline..
  • 【Convenient Design】The outboard boat motor fuel tank cap has two function, Sealing and Venting. In addition there are separate air inlet and oil outlet, design for prevent oil from spilling. Marine portable fuel tank includes handle to easily carry fuel wherever you need it..
  • 【Wide Application】Fuel tank size: 11.8*9.8*18.1in. Large-capacity: 6 gallon (24L). It's perfect for Small to Large Boats, Inflatables, Tinnies, Canoes and even Kayaks. We ship directly from the US warehouse, and the package will be delivered within 5-7 days at the latest..
Check Stock

SAE O-Ring BOSS Hydraulic 212 Piece O Ring Assortment Seal Kit Buna-N 90 for Hydraulic Fittings Hoses

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

Portable Boat Fuel Tank, 6gal - 24L Outboard Marine Portable Fueling Tank with Hose Connector Replacement for Marine Outboard Motor Plastic Fuel Tank

  • The 6.3-gallon marine fuel tank is made of high-density polyethylene, which is anti-aging, impact-resistant and corrosion-resistant. It can bounce back naturally after an impact without permanent deformation..
  • Two Modes of Sealing and Venting-There are two designs of fuel tank cap, which can be sealed or vented, and the metal nut can be vented and safe to use(High-quality spring designed for deflation, Unscrew the yellow metal nut to release the air in the fuel tank. Tighten the yellow metal nut and the oil tank is airtight), which helps to form a smooth fuel flow, thereby minimizing leakage..
  • With An Oil Volume Indicator- Helps you to clearly understand the changes in the oil tank and the remaining oil volume and replenish it in time. A filter is built into the air inlet of the fuel tank to ensure clean fuel..
  • Equipped with I-shaped handle, more ergonomic, easy to carry and store, rust-proof, durable, beautiful, easy-to-use handle design, light and portable, easy to place and carry..
  • Package includes: 1* fuel tank , 1* boat fuel line hose, 2* of ends fuel connectors fittings and 1....
Check Stock

uxcell Silicone O-Ring, 33mm O.D, 27mm I.D, 3mm Width, Seal Rings Gasket, White, Pack of 20

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance. Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
Check Stock

Sterling Seal ORBN022x50 Number-022 Standard O-Ring, Buna Nitrile Rubber, 70 Durometer Hardness, 1' ID, 1-1/8' OD (Pack of 50)

  • For use across a wide temperature range from -30 degrees F to 250 degrees F, Good/Excellent resistance to many petroleum oils/greases, hydraulic fluids, alcohol, mineral oil and grease.
  • Oil resistant applications of all types. Low temperature military uses. Off-road equipment. Automotive, marine, aircraft fuel systems. 70 Durometer.
  • Compatible with Aliphatic Hydrocarbons (propane, butane, petroleum oil, mineral oils and greases, diesel fuel and fuel oil).
  • Not Compatible with product fuels with a high aromatic content.
  • Chlorinated hydrocarbons (Trichloroethylene).
  • Buna N or Nitrile has good mechanical properties when compared with other elastomers and high wear resistance.
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ...urbo oil feed and boost line, transmission oil cooler line, EFI fuel line, carb fuel line, ls engine swap fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and other high temperature high pressure applications..
  • Application: fuel, lube, alcohol, ethanol, coolant and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

Electric Fuel Pump Assembly Replacement for Ford F250 F350 Super Duty V8 6.2L 2011-2016 E2582M

  • ... Electric Fuel Pump Replacement for: Volvo Penta Stern 8.1L engines: 8.1GiCE-J, 8.1GiCE-JF, 8.1GiCE-M, 8.1GiCE-MF, 8.1GiCE-P, 8.1GiCE-Q, 8.1GiC-J, 8.1GiC-JF, 8.1GiC-Q, 8.1GiE-J, 8.1GiE-JF, 8.1GiE-K, 8.1GiE-KF,See more details below..
  • Function:Marine fuel pumps are necessary for engine operation.High pressure fuel pump is the interface between high pressure oil circuit and low pressure oil circuit. Its function is to generate fuel pressure in the common rail by controlling the fuel output. In any case, it is primarily responsible for providing sufficient high pressure fuel to the common rail..
  • Premium quality:The Fuel Pump Assembly wear out can greatly affect the way your motor burns fuel, and subsequently, how much power your engine generates. Once a part of a boat fails, it's obviously too late to fix it. For your boating performance, the fuel pump assembly is one component you can't ignore.Please choose CARMOCAR Fuel Pump Assembly..
  • About service:The CARMOCAR customer service period is 1 year.Note: Please check the display pictures and OEM to see before purchase.If there is any pro....
Check Stock

Plews LubriMatic 55-005 Marine Lower Unit Hand Pump for Standard Neck Quart Bottles - 4cc Per Stroke

  • INDUSTRIAL GRADE: Our LubriMatic 55-001 Fluid & Oil Transfer Pump is a simple and effective solution for adding fluids to small engines, automotive transmissions and axles, farm equipment, industrial equipment, and marine lower units.
  • Ideal for adding oil and other fluids, such as antifreeze, fuel, steering fluid, or gear lube, to small engines and marine lower units.
  • LEAK-FREE FLUID TRANSFER: Avoid messy spills and the hassle transferring fluids.
  • The Lubrimatic 55-001 threads securely onto quart sized bottles and containers with traditional sized necks as commonly used for motor oil, ATF, and gear lube.
  • Not compatible with bottles that have oversize or wide-mouth necks.
  • RIGID INLET TUBES: Make kinks a thing of the past! The stiff, rigid construction of the inlet tubes ensures that no clogs or obstructions will keep your fluids from pouring smoothly.
  • Inlet tubes won't curl like flexible tubes, ensuring a more complete fluid transfer.
  • FLEXIBLE HOSE: Includes a 17 inch long, 3/8 inch diameter flexible outlet hose to allow easy access to hard to reach fill plugs and tubes.
  • QUALITY YOU CAN TRUST: For over 40 years, LubriMatic has been developing and distributing superior lubrication equipment, and we are proud to supply e....
Check Stock