Reviews Marine Engine Oil Pressure Gauge Adapter

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

JoyFans Oil Pressure Tester Tool, 0-140PSI Oil Pressure Gauge Kit for Fuel System Mechanical Sensor Engine Cylinder Compression Test with Hose Adapters for Cars ATVs Trucks Use Red Case

  • Fuel Injector Pump Pressure Check: Engine oil pressure test tool kit is designed to test oil pump pressure and check operation of fuel system components. Compare the measured pressure value to the standard reference range from manufacturer, we can take quick and accurate diagnosis and feasible solution on the oil pipeline leakage and engine wear, so as to confirm if the oil pressure gauge has been damaged. No more reliance on the dashboard light..
  • Oil Pressure Tester: The petrol engine cylinder tester kit has a shockproof rubber casing and a large clear dial with readings from 0~140 psi and 0~10 bar for easy and accurate work on both American and metric systems. Keeping the gauge safe from bumps and drops. Built-in hose assembly also comes with a side pressure relief button for instant pressure reset and no repeated hose disconnect, and 4 ft long flexible hose with convenient quick coupler for simple adapter installation and removal..
  • Durable Construction: 11-piece metal adapters are all made with heavy-duty forged steel and brass hardened for maximum strength and longevity.
  • designed to withstand extreme pressure in any situation for professional use. Each thread adapter marked with number, features black oxide finish to resist rust and corrosion.
Check Stock

Shankly Mechanical Oil Pressure Gauge Kit Compression Tester - Professional Engine Compression Testing Kit or Gauge Oil Pressure

  • ✅ OIL PRESSURE GAUGE KIT: Shankly's oil pressure gauge is used to monitor the oil pressure in your vehicle. This pump tester prevents you from engine failure, broken hose, or leaking gasket due to lack of oil. Great to have in your toolbox.
  • ✅ DURABLE & GREAT QUALITY: Shankly's oil pressure gauge line is well protected by a rubber bumper and a decent length of hose. It comes with spare orings adaptor and with quick connect couplers, making this a reliable tool and long lasting.
  • ✅ UNIVERSAL: This oil pressure tester includes a 90-degree coupling adapter for limited access applications. This is also fitted with quick coupling adaptors and 1200mm of hose that will serve a mechanic effectively for a very long time.
  • ✅ CONVENIENT HANDY CASE: Shankly's oil pressure tool comes in a convenient case, making transportation, storage, and organizing a snap. This oil pressure gauge line kit works perfectly for your setup.
  • ✅ SATISFACTION GUARANTEED: We stand by the word "quality" we assure you that your purchase of this oil pressure test kit will arrive in your place in good condition, If any issues occur, feel free to contact us.
Check Stock

JIFETOR Fuel Injection Pump Pressure Test Gauge Set, Automotive Gas Gasoline Fuel Oil Injector Tester Tool Kit 0-140PSI, with Schrader Adapters Universal Compatible with Ford Auto Car Truck Motorcycle

  • FUEL PRESSURE GAUGE TESTER: Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines. Specific tool for fuel system detecting and troubleshooting. Fuel pressure gauge kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
  • UPGRADED FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 15"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 5-1/2"L hose for small Schrader valve (compatible with some Ford), and 8"L hose for M6 fuel pressure test port, and there are also M8/M10/M12/M14 adapters for the corresponding test port on fuel rail. The aluminum tee can splice in-line between the fuel pump and engine for most vehicles.
  • 140PSI/10BAR PRECISION-MACHINED FUEL PUMP TESTER GAUGE: You just need to ensure there is an adapter in the kit suitable for your test port or the inline connection is workable for your car. Pressure gauge adopts rubber cover protected 3-1/2" large dial and dual color cod....
Check Stock

Oil Pressure Tester Kit, 0-140 PSI Engine Oil Pressure Tester Gauge Tool Kit for Cars ATVs Trucks Use.

  • FUNCTION: The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. The measured value can be used to judge the operation of fuel system components such as electric gasoline pump and oil pressure regulator. And with this best in class oil pressure test tools, you can get a definite pressure value well without relying on the dashboard light..
  • INCLUDING: This oil pressure test tool kit contains a wide assortment of durable adapters designed to fit mot import/domestic engines. The 10 adapters are marked with number, you can choose the right one very easy. 4FT long hose is made of rubber nylon resin, working pressure 300 PSI. This is a great kit for DIY auto tools, to test engine oil pressure value quickly and accurately..
  • DURABLE AND SAFE: The material of the engine oil pressure tester kit consists of Copper, Rubber, ABS Plastic, Iron, and Aluminum.
  • And the gauge is equipped with a shockproof cover, which is under great protect and convenient maneuverability.
  • Whole oil pressure tester kit packed in a molded case making it easy to store and organize the equipment..
  • PARAMETER: The oil pressure gauge use 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large ....
Check Stock

Oil Pressure Gauge Adapter, 1/8in NPT Female to M10x1.0 Male Reducer Oil Pressure Gauge Adapter Replacement Black

  • [ IMPORTANT ] VMS RACING Brand Design (NOT generic). Comes in VMS RACING Branded BOX. Brand New in Box / Never Used / Never Installed..
  • High Quality Silver Face 0-60 Psi Triple Chromed Oil Pressure Gauge with TWO Triple Chromed Plated Fittings and O-ring included to match the gauge and for a long-lasting finish. EVERYTHING IS TRIPLE CHROMED... EVEN ALL OF THE FITTINGS so you will NOT see any brass . Beautiful finish to compliment your most prized Harley. PERFECTLY DRESSED FOR ANY OCCASION. If you have other nice chrome pieces on your ride, this gauge will feel right at home and a must-have..
  • Measurements: Gauge face (w/ bezel) - 1.66" (42.25mm) Gauge Case - 1.62” (41mm) Gauge Depth ~ 1” (25mm) Fitment: Fits (70-84 Shovelhead) (84-99 Evolution) and (38-69 & 84-91 Big Twin Models) Engines ONLY. Fittings allow for a FLAT MOUNT (or) 45 Degree Mount depending on the application. Triple-chromed / Brass INTERNALS. 1/8 NPT main Male Fitting.
  • VMS RACING Oil Pressure Gauge Kit Provide you with a MORE ACCURATE OIL PRESSURE READING than Liquid Filled Oil Pressure Gauges. Liquid Filled Gauges tend to lose the liquid due to Engine Vibration. You eliminate that problem with this gauge. This Kit allows for accurately measuring Oil pressure in your Big Twin Engine. ....
Check Stock

KUNTEC Cylinder Leak Down Tester Engine Compression Diagnostics Test Tool Kit for Piston Ring, Valve, Head Gasket

  • The Cylinder Leak Detector Kit is designed to easily detect a variety of engine faults, including worn piston rings, worn valves, cracked cylinder walls, and blown head gasket.
  • The Engine Compression Diagnosis Tester Kit also can check the amount of leakage and locate leaks area in an engine cylinder to help determine the source.
  • Cylinder compression tester is suitable for work on any petrol engine with 12 or 14mm spark plugs, and ideal for testing trucks & late model cars where clearance is minimal.
  • Pressure gauge with dual scale reads from 0 to 100 PSI and 0 to 7 Bar, shows pressure in PSI and Bar and percentage of cylinder leakage.
Check Stock

DASBET Car Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump and Vacuum Tester Gauge, Leak Carburetor Pressure Diagnostics

  • Function: The Carburetor Carb Valve Fuel Pump Pressure & Vacuum Tester Gauge Test Kit enables testing of the fuel delivery pressure to the engine to check for worn or defective parts in fuel pumps and vacuum systems.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy-to-use: Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum, 100 PSI Oil Pressure & Digital Wideband Air/Fuel Gauges - Fiberglass Triple Dashboard Pod

  • ...ompatible with the Subaru Impreza WRX 2002-2007 features a Fiberglass Triple Dashboard Pod, 3 Tinted 7 Color Series Gauges, Oil Galley Plug Adapter & an Add-On Clock Power Harness.
  • Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - Digital Wideband Air/Fuel Ratio Gauge with Oxygen Sensor, Weld-In Bung, Control Box, 10' Sensor Harness, 7' Gauge to Control Box Harness, 5' Power Harness & 3' Data Logging Wire - Tinted 7 Color Series Features a Black Dial, Tinted Lens, 7 Solid Color Modes & 2 Color Cycle Modes Allow You to Match Your Factory Dashboard Lights or Add a Custom Style.
  • High Quality Fiberglass Dashboard Gauge Pod Replaces the Factory Clock & Mounts in its Position - Stronger Design than ABS Plastic - Features a Dome Lip to Prevent Sun Glare on Gauges.
  • Oil Galley Plug Adapter Installs the Oil Pressure Sensor to the Vehicle's Engine - Add-On Clock Power Harness Powers All 3 Gauges from 1 Unit - Plugs into the Factory Clock Connector - Compatible with the Subaru Impreza....
Check Stock

YSTOOL Oil Pressure Tester Kit Professional Oil Pressure Gauge Tool for Engine Diagnostic Test with Hose Adapters and Carry Case for Cars ATVs Trucks Use 0-140psi

  • The engine oil pressure tester kit is used to diagnose and test the engine oil pressure value, to check whether it is normal. Prevent engine failure due to lack of oil. And with this best in class tools, you can get a definite pressure value well without relying on the dashboard light..
  • There are 10 types of thread adapters are suitable for most cars, motorcycles, boats and other vehicles with gasoline and small diesel engines. As long as the adapters can match with your engine and oil pressure does not exceed 140 PSI. The 10 adapters are marked with number, you can choose the right one very easy..
  • The pressure gauge uses metal gauge head with shockproof rubber cover, 3" big dial with clear dual scale range 0 to 140 PSI and 0 to 10 Bar. Compare to a large range, this oil pressure gauge is easy to read about 1-2 Bar with a short range. There are a straight quick coupler and a elbow one in the case, you can choose it according to the location of the engine oil pressure test port..
  • Steel adapters, brass quick couplers, are featured with high hardness, rustless, durable and good air sealing. The 4FT long hose is made of rubber nylon resin with MAX. working pressure 300 PSI. There are also a small bag of seal gaskets, which are used for replacing the ones on....
Check Stock

WATERWICH Oil Pressure Gauge Kit 0-100 PSI Press Gauge Meter Includes Electronic Sensor 2inches 52mm Universal for 4 6 8 Cylinder Car Truck Vehicle Automotive

  • 1.Easily display at night:Our Oil Pressure Gauge is highly visible with a WHITE Light,Easy viewing at all angles during any lighting conditions,2-1/16" (52mm) Diameter with Black Dial, Illuminated Red Needle & black face gauge..
  • 2.Read Range:Our Gauge will precisely monitor the oil pressure level within your engine that is in the range of 0-100Psi,LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions..
  • 3.Easy installation:Our Oil Press Gauge includes electric wire with necessary mounting and installation hardware,no need other sensor,Come with the sensor can fit it well..
  • 4.WATERWICH Press Gauge Meter Reads Vehicle's PSI from 0 to 100 - For 4, 6, and 8 Cylinder Gas Powered Engines..
  • 5.DC12V compatible, Universal for 4, 6, and 8 Cylinder Engines Car, Truck, ATV, RV Vehicle Automotive etc. Suitable for all kinds of Oil Pressure Gauge, and display the Oil Pressure of the engine,All gauges are brand new, complete in box..
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....
Check Stock