Reviews Marine Bronze Valve

PENN® Senator® Star Drag

  • Backlight side plates with stainless steel reinforcement Rings.
  • Precision-machined stainless steel pinion gear.
  • High-strength marine grade bronze alloy main gear.
  • Stainless steel frame rings enhances rigidity to prevent “frame-flex”.
  • HT-100 drag washers provide smooth drag under heavy loads.
Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
  • 【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
  • 【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....
Check Stock

Water Flow Control Valve Brass Construction G1/2 Water High Pressure Regulator Bathroom Shut Off Valve Turn Off Reduce Water Restrictor Switch Device for Shower Head Hose Bidet Sprayer By Bathfinesse

  • ... wrench. Use for standardized hand shower wand, showerhead arms, bidet sprayer or hoses pipes, which also widely used at home, bathroom, kitchen, RV, Garden etc..
  • COVNENIENT ADDITIONNicely matches your existing set up, functional addition to a high flow shower, easy to install without needing extra tools..
  • Oil Rubbed Bronze FinishRust-resistant, resists daily corrosion, scratches and tarnishing. The decorative bronze matches your bronze hand held shower head, head shower and other bronze/dark color bathroom fixtures..
Check Stock

Febco 3/4 in Bronze Double Check Valve Assembly-3/4 850

  • This 3/4 in. double check valve assembly is designed to prevent the backflow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure in accordance with national plumbing codes and water authority requirements..
  • Its compact modular design facilitates easy maintenance with a single access cover for in-line repairs..
  • The FEBCO Series 850 Double Check Valve Assemblies are designed for non-health hazard applications..
  • This assembly consists of a bronze body construction, NPT end connections, quarter turn ball valve shutoffs, top mounted test cocks, 2 in-line independent positive seating check modules, captured springs, and replaceable check discs and seats..
  • Bronze body for durability, Modular compact design, Replaceable seats and seat discs, Top entry.
Check Stock

Taylor Made Products 61149 Tuff End Inflatable Vinyl Boat Buoy, Orange, 18 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61155 Tuff End Inflatable Vinyl Boat Buoy, Orange, 27 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 61152 Tuff End Inflatable Vinyl Boat Buoy, Orange, 21 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1146 Tuff End Inflatable Vinyl Boat Buoy, White, 15 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

Taylor Made Products 1140 Tuff End Inflatable Vinyl Boat Buoy, White, 9 inch Diameter

  • Made in the USA for heavy duty marine applications.
  • Injection molded ends tested to 2000 psi tensile strength, featuring large line holes to fit most ropes and shackles.
  • Tri-valve for easy inflation with football needle or compressor.
  • Constructed from flexible and resilient marine grade vinyl.
  • Tuff End fenders feature a seamless one piece construction, the strongest in the industry.
  • Feature large line holes that will accept most ropes and standard shackles.
  • Injection molded ends tested to 2000 psi tensile strength.
  • Tuff End fenders feature a seamless construction, the strongest in the industry.
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 4

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock

CASTNOO for LS Valve Seal Installation Tool 2 piece set 4.8 5.3 5.7 6.0 6.2 Springs Suitable for LS Racing

  • ☞Function: A spring positioner is required. When the bronze rail is separated, the LS valve stem seal can prevent unnecessary oil from entering the combustion chamber..
  • ☞Installation: The operation is simple and convenient, and the valve seal can be easily installed when replacing the spring..
  • ☞Application: The valve seal installation tool can be used for stock powder metal and bronze rails..
  • ☞Protector: This tool allows you to slowly press the seal without damaging the seal..
  • ☞Service quality：100% service guarantee, if you encounter any problems, please contact us in time, we will deal with you as soon as possible..
Check Stock

U.S Marine Corps USMC Unique Refrigerator Magnet by Old Dominion LLC

  • USMC magnet for your refrigerator or any magnetic metal surface. Antique bronze finish. Trademarked by Old Dominion LLC!.
  • Striking Metal Marine Corps Emblem - perfect gift for a current, future, or former Marine.
  • Approximate 2" Diameter - two magnets on back.
  • Put your Marine pride on display -- Semper Fi! For other great deals, please visit our Amazon storefront at https://www.amazon.com/olddominionllc..
Check Stock

NIBCO F910B-LF Silent Check Valve Lead-Free* Class 125 Flanged Bronze Seat 2-1/2

  • The NIBCO lead-free cast iron sliding disc silent check valve is spring actuated with renewable cast bronze seat and bronze disc.
  • The spring return reduces noise for quiet operation.
  • The wafer style check valve features a flanged wafer body style to fit between standard flanges.
  • The check valve is recommended for commercial and industrial water applications.
  • Lead Free refers to the wetted surface of pipe.
  • fittings and fixtures in potable water systems that have a weighted average lead content ≤ 0.25% per the Safe Drinking Water Act (Sec. 1417) amended.
  • Spring actuated (1/2 psi cracking pressure).
Check Stock