Reviews Manual Stud Extractor

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

  • Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications.
  • Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
  • Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
  • Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
  • Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very cl....
Check Stock

DEWILL Broken Bolt Remover, Stud Extractor Tool to Locks and Removes 1/4-Inch to 1/2-Inch Rounded Studs, Hexagonal Flat - Suitable for Rust, Painted, Damaged Waste Bolts

  • TOOL INTRODUCTION - Damaged bolt extractor 3/8" inch drive. It is suitable for most drive tools and can be used with manual or pneumatic impact wrenches and ratchets as well as adjustable wrenches and flat wrenches. Heat treated alloy steel is very durable and chrome-plated, will not be damaged by high-strength work, and will add lubricant to the internal rotating threads to provide better protection against rust and wear..
  • OPERATIONAL GUIDANCE - Simple operation does not need to be considered. Place the stud extractor on the stud and turn the bottom hex flat nut counterclockwise to tighten the jaws. After the jaws hold the broken bolt or stud firmly, continue to rotate the stud counterclockwise until it is removed.Then release and separate them in a clockwise direction..
  • EFFICIENT & VERSATILE - This stud removal tool is easy to operate and can help you get more rest time, whether it is the exhaust manifold, fuel plug, broken bolts, or broken, painted, rusted fastening screws The posts are effectively removed, but the threaded surface may be slightly worn due to the strong clamping force..
Check Stock

ABN Universal Stud Bolt Extraction Remover 3/8in Drive – 1/4 to 1/2in 6 to 12mm Studs Metric & SAE Removal Tool

  • EFFORTLESSLY REMOVE ANY STUD: The ABN Universal Stud Bolt Extraction Remover, 3/8” Inch Drive – 1/4” to 1/2" (6mm to 12mm) Studs Metric & SAE....
  • FITS YOUR APPLICATION: Adjustable to fit studs that are 1/4-inch to 1/2-inch (6mm to 12mm).
  • USE YOUR TOOLS: Fits 3/8-inch impact wrench or ratcheting wrench.
  • Impact wrench can be inserted directly into the stud extractor.
  • BUILT TO LAST: Jaws are perfectly shaped to easily grab a bolt or stud even with no head.
  • Solid metal construction for strength and longevity.
  • EASY TO USE: Simple instruction and diagrams included.
  • Place stud extractor over stud to be removed and tighten jaws by turning....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 7L

  • 7L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

ATPEAM Oil Changer Vacuum Fluid Extractor | Manual Engine Oil Extractor Oil Changer Vacuum Fluid Extractor Pump Tank Remover 9L

  • 9L Oil Extractor: The manual oil extractor is made of high-quality polypropylene for durability and resistance to corrosion and rust. Its capacity can....
  • Four Fluid Extractor Hoses: The manual fluid extractor comes with four suction hoses to change different sizes for various conditions. Along with the....
  • Fluid temperature range: 35°F- 200°F/1°- 95°C.
  • Easy To Use: You can change engine oil and transmission fluid by merely opening the hood, inserting an appropriate hose to the bottom of the oil pan.....
  • Wide Application: The fluid extractor is widely used to extract the engine oil, brake fluid, ATF fluid, and other non-corrosive and non-thick fluid of....
Check Stock

Lisle 68500 Manifold Drill Template for Ford 2V & 3V

  • Interchangeable plates and alignment pins ensure drill is centered on the broken stud.
  • Depth gauge for drilling is marked on the template. Designed to remove broken exhaust manifold studs on 4.6L, 5.4L and 6.8L V10 2 valve and 3 valve Ford Triton engines without damaging the cylinder head..
  • The stripped screw extractor is then used to remove the broken stud.
Check Stock

Solary Aluminum Weld Stud Weld Studs CD Type Weld Stud Capacitor Discharge CD Stud 1 Set for Welding Bolt Plate Insulationnail Spot Welders

  • ①Appartus for aluminum stud -Raw Material:Copper. -Length:65mm..
  • ②Aluminum stud connector -Raw Material:Aluminum . -Length:60mm..
  • ③Aluminum stud -Raw Material:Aluminum . -Length:15mm..
  • ④Dent pulling hook -Raw Material:iron. -Length:77mm. -Weight:about 41g..
  • ⑤Welding Extractor -Raw Material:Copper. -Size:L50*W50mm. -Weight:about 60g..
Check Stock

Damaged Screw Extractor Set, 12Pcs Screw Extractor Kit, Easy Out Bolt Extractor Set and Drill Bits Guide Set for for Broken Bolts Removing Hand Tools, 4-25mm(1/8-1") Broken Screws

  • Damaged Screw Extractor: These extractors kit will remove most kinds of damaged, rusted, broken or stuck screws from any wood or metal surface. The easy-to-remove extractor set is made from premium steel, high temperature quenching, surface anti-rust treatment, strong and durable. Easily remove damaged or broken screws, bolts, studs, threaded pipe fittings and so on..
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

Segomo Tools 13 Piece Lug Nut and Bolt Extractor Removal Metric and SAE Socket Tool Set 8-19mm | Lug Nut Remover | Bolt Remover | Lug Nut Extractor | Extractor Set | Lug Nut Removal Tool - NBE13819MM

  • [ Easy To Use ] Our lug nut remover is designed with left-hand spiral for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Every Size You Need ] This nut extractor set comes in sizes: 1/4, 5/16(8mm), 3/8, 10mm, 7/16(11mm), 12mm, 1/2, 13mm, 9/16(14mm), 5/8(16mm), 17mm, 11/16, 3/4(19mm). Can be used on SAE and Metric sizes.
  • [ Will Last In Time ] The lug nut extractor set is made from black chrome molybdenum that provides greater strength and durability and prevents corrosion. Our extractor socket set will be with you for years..
  • [ Versatile Design ] The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws. You can use this bolt extractor set on different projects..
  • [ Used With Multiple Tools ] 3/8 square drive of each bolt extractor tool can be used with flat wrench, pliers, socket wrench, adjustable wrench, Vise-Grip locking pliers, hand ratchets or impact wrench guns and air ratchets. Lifetime warranty.
Check Stock

Manual Sugarcane Juicer Crusher Machine Commercial Sugar Cane Press Juicer Machine Sugar Cane Extractor Squeezer with 2 Peeling Knives

  • 【3 heavy duty rollers】： This rollers of the manual sugar cane juicer are designed to be galvanized iron due to pressure requirements. And it....
  • 【Multi gear drive】： This commercial sugarcane press extractor has several gears. The gears help each other and bite each other, so it is easier....
  • 【Delicate filter】： This sugar cane squeezer is equipped a stainless steel Filter disc with fine large-scale filter screen, which can ensure that....
  • 【Big hand wheel】： This manual sugar cane extractor has the design of enlarged diameter hand wheel, which can make it easy to operate. If the....
  • 【Easy cleaning】： This sugarcane press extractor adopts food grade stainless steel juice box and high quality faucet, both of them make it easy....
Check Stock

Segomo Tools 10 Piece Lug Nut Remover & Bolt Extractor - Metric and SAE Extractor Set - 10-19mm Stripped Bolt Remover & Nut Extractor Set - Stripped Lug Nut Remover Kit - NBE10919MM

  • [ Extract Even Damaged Bolts & Nuts ] Remove even the most stubborn nuts, bolts, lugs, studs, hex screws, and more. The left-hand spiral of each piece of this nut anad bolt extractor set is desgined for locking on to rounded ,damaged bolts for easy grip of stud, bolt or nuts..
  • [ Different Metric & SAE Sizes ] Work on different jobs with this extractor socket set. It offers the following sizes: 9mm 10mm 11mm (7/16) 12mm 13mm 14mm 15mm 16mm(5/8) 17mm 19mm (3/4) Can be used on SAE and Metric sizes.The working end has a helical shaped flute to help grip rounded fasteners, round head bolts and pan head screws..
  • [ Will Last For Years ] Our bolt & nut extractor kit is made from black Chrome Molybdenum that provides greater strength and durability and prevents corrosion. You will be able to work with this tool for years!.
  • [ 3/8 Drive Socket Set ] You can use our stripped lug nut remover with 3/8 square drive for use with socket wrench or impact wrench gun..
  • [ Stay Organized ] This lug nut & bolt extractor tool comes supplied in a durable case so that you can keep the set organized and easily transport it between different jobs..
Check Stock

OEMTOOLS 24985 Manual Fluid Extractor and Filler 7 Oz./.21 Qt./200 mL Fluid Transfer Pump Oil Extractor for Gear Oil Transmission Fluid and More

  • MANUAL FLUID VACUUM PUMP: Drain and fill automotive fluids and oils directly from the neck or reservoir.
  • Our manual oil pump extractor features two....
  • EXTREMELY VERSATILE: Designed to be chemical and oil resistant for multiple applications.
  • Use our fluid extractor automotive tool on transmission,....
  • EASY TO USE: Our manual oil transfer pump is easy to use.
  • Open the reservoir or neck on for fluid or oil extraction/filling and place the hose into....
  • DIAGNOSTIC TOOL: Checking the health of your fluids and oils is easy with our oil evacuator pump.
  • The translucent 7oz cylinder dual scale body is....
  • NO LEAK OPERATION: Our manual extraction pump features two gaskets to keep your oil and fluid extraction jobs leak and mess free.
Check Stock