Reviews Manual Knockout Punch

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

  • Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
  • Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
  • Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.
Check Stock

TEMCo TH0364 Dimple Die for 1-1/4” Actual Hole Size

  • Dimple Die for 1-1/4” Actual Hole Size.
  • Rated For 3/16" Mild Steel. Recommended Minimum Forming Tonnage: 13..
  • This dimple die set creates flared holes. Cut out holes inherently provide reduced weight of the work piece, and these dimple dies create rigidity by flaring the holes..
  • Die Material: Punch Grade Hardened Tool Steel, Black Oxide Finish..
  • Recommended Compression Tool: TEMCo Industrial TH0037 Knockout Punch Set or any other electricians knockout punch set..
Check Stock

Southwire Tools & Equipment KODRAW3/4 Knockout Punch Draw Studs, 3/4-Inch

  • Manual knockout sets with unique 3-point cup cutting surface provides a clean, quick and easy cut, saving time and money.
  • Slug splitting punch features in an economic Manual ball bearing design.
  • Cuts through 10 gauge mild steel as well as aluminum, fiberglass, and plastics.
  • Punches and Dies may be used with southwire mpr01sd ratchet drivers and mp-01pro or m360hp Hydraulic drivers.
  • Ball bearing 7/16-inch and 3/4-inch draw studs for reduced friction.
Check Stock

AMZCNC 8 Ton 1/2 Inch to 2 Inch Hydraulic Knockout Punch Driver Tool Kit with 6 Dies Hole Complete Tool Electrical Conduit Hole Cutter Set (8T（1/2"~2"）)

  • Labor-Saving & Hydraulic 10T: It is a knockout punch set with a separable hydraulic pump. The maximum crimping power is 10 T. It features a good tightness and no oil leakage..
  • Durable Dies & Punches Set:Actual hole diameter is 0.89" for ½" conduit. Actual hole diameter is 1.11" for ¾" conduit. Actual hole diameter is 1.36" for 1" conduit. Actual hole diameter is 1.7" for 1¼" conduit. Actual hole diameter is 1.95" for 1½" conduit. Actual hole diameter is 2.42" for 2" conduit fully meeting your needs. Two draw bolts are solid and built to last. Max thickness for steel: 1/8".
  • Max thickness for stainless steel: 1/16"..
  • Convenient Operation: The knockout set is fast and easy to operate. With the excellent cooperation of a drill bit and a driving bolt, you can easily get a clean and uniform hole. And the long plastic handle ensures zero sliding and effective force transfer, improving work efficiency..
  • Portable Carrying Case: The stud punch tool is stored in a durable plastic toolbox that is not easily broken, saving space. It is compact, light-weigh....
Check Stock

TEMCo TH0390 – Manual Knockout Punch Driver Kit (Set) for ½ inch to 2 inch Electrical Conduit Hole Sizes (1/2\-2\ Conduit Size)

  • Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2.
Check Stock

TEMCo TH0397 – Manual Knockout Punch Driver Kit for ½ inch to 1-1/4” inch Electrical Conduit Hole Sizes (1/2\- 1-1/4\ Conduit Size)

  • Manual drive knockout punches, for use with ratchet, wrench, or electric driver. Conduit punch sizes: 1/2.
Check Stock

VEVOR 15 Ton Hydraulic Knockout Punch Kit, 1/2" to 4" Conduit Hole Cutter Set, KO Tool Kits W/Puncher 10 Piece, Metal Sheet Driver Tools, for Aluminum, Brass, Stainless Steel, Fiberglass and Plastic

  • Efficient Hydraulic 15T: Get the job done faster and more efficiently with our powerhouse hydraulic mechanism pump! The hydraulic mechanism pump produces 15T strong pressure, providing high punching accuracy and fast punching speed. Compared with standard wrenches, our knockout punch set is more labor-saving and efficient, ideal for completing big projects. The ram's angle can flexibly change to meet your various punching needs. It is also perfect for use in narrow places..
  • Built to Last: Made from a sturdy combination of 40 Cr steel and 45# steel, you can trust in its strength, sturdiness, and longevity. The stable construction is suitable for heavy-duty and frequent punching works. With laser-engraved alignment marks, positioning is a breeze, and precision is guaranteed. Store and transport the kit with ease thanks to its compact, lightweight design and durable carrying case. It's about time you knew where your tools were! No more missing parts!.
  • Comfort at its finest: Punch with ease and comfort using our user-friendly knockout set! The innovative slug splitting dies make slug removal a breeze, leaving....
Check Stock

ANBULL Hydraulic Knockout Punch Set Max 6T with 6 Dies Metric from 16mm to 32mm (Φ5/8\ to Φ1-1/4\), Hydraulic Metal Hole Punch W/Tool Case

  • 【Labor-Saving Hydraulic】: The maximum pressure of the ANBULL hydraulic knockout punch driver can reach 6 tons. It can easily open holes on the thickest 2.5mm iron plate and the thickest 1.5mm stainless steel plate..
  • 【Integrally Formed】: Integrally formed so the hydraulic knockout punch driver does not leak oil..
Check Stock

HORUSDY 28-Piece Heavy Duty Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 28 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC, Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 16PC Chromium Vanadium Steel：punch and chisel set comes with 16-pc. chrome vanadium punch and chisel set, 5-pc. pin punches, 5-pc. taper punch, 3-pc. cold chisel, 2-pc. center punch and chisel punch gauge..
  • 12PC High Carbon Steel：6PC cold chisel set, 4PC pin punch set and 2PC center punch..
  • It is equipped with a special storage bag for easy carrying..
Check Stock

SWANLAKE 28PCS Heavy Duty Punch and Chisel Set,Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • 1.This 28pcs punch and chisel set contain: 16pcs punch and chisel set made of chrome vanadium,12pcs punch and chisel set made of carbon steel ..
  • 2.Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 3.Available in different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • 4.Flat chisels are tempered to resist splitting and mushrooming..
  • 5.Roll-up storage pouch makes easy storage..
Check Stock

SEDY 16-Piece Punch and Chisel Set, Including Taper Punch, Cold Chisels, Pin Punch, Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts and pins..
  • Product material: made of Chrome Vanadium Steel, hardness: 54~58HRC. Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1/4" x 6-3/4".
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4".
  • 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x 6-1/2".
Check Stock

Greenlee 7646 Hydraulic Knockout Punch Driver

  • Compatibility - works with all Greenlee knockouts. Same draw studs used with Intel-PUNCH , LS50L2 and 746A ram.
  • Package dimensions:18.7"L x 5.7"W x 16.4"H.
Check Stock

HORUSDY 16-Piece Punch and Chisel Set Including Taper Punch Cold Chisels Pin Punch Center Punch

  • Available in 16 different shapes and designs, including: bolt hole alignment, ball head separation, unfolding knuckle, center punch, knockout bolts....
  • Heat treated chromium vanadium provides a high hardness rating that prevents rapid expansion of the head and passivation of the chisel and punch..
  • 5PC Tapered punch: 3/32" x 5-1/4", 1/8" x 5-3/4", 5/32" x 6", 3/16" x 6-1/4", 1 /4" x 6-3/4" and 3PC Cold Chisels: 3/8" x 5-1/2", 1/2" x 6", 5/8" x....
  • 5PC Punch: 3/32" x 4-1/4", 1/8" x 4-3/4", 5/32" x 5", 3/16" x 5-1/4", 1/4" × 5-3/4" and 2PC Center punch: 1/8" x 5", 3/16" x 6".
  • Product material: made of chrome vanadium steel, hardness: 54~58HRC.
Check Stock