Reviews Manual Drywall Sheet Lifter

11' Drywall Lift Panel Hoist, Jack Lifter Jack Rolling Lockable Caster Wheel Drywall Lift Construction Tools (Red-Upgrade)

  • ?Easy to assemble and disassemble?The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio..
  • ?Allows one person working alone?This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • ?Safe and in good balance?The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cable of the Panel Hoist..
  • ?150Lbs Load Capacity?This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • ? Easy to Install and Store?No tools are needed for assembling or disassembling your plasterboard lifter. Furthermore, you can place the drywall hoist in its box (51? x 19.7? x 6.7?) to optimize the space when not in use..
Check Stock

Drywall Tools Carrier, Plywood Panel Plasterboard Glass Board Handle Carry Load Lifter

  • ABS engineering plastic, anti-decoupling design to prevent goods falling down, ensure safe operation, TRA non-sliding material handle..
  • Excellent way to carry drywall, plywood, or solar panels,Reduces back strain, improves safety, and speeds up walking with a panel..
  • Size: 14.4" L ×6.5" W,Handle width 5.1" ，Base Plate width 2.6"..
  • The Thickened & Multi-frame Base Plate, With Great Load Bearing Approx 176 lbs..
  • Just hook the panel lifter around the bottom of the sheet at the center point, tip the sheet up and lift, leaving your lifting arm fully extended as if you were carrying a suitcase,Use your other arm to balance the sheet, keeping the drywall close to horizontal..
Check Stock

Idealchoiceproduct Drywall Lift Rolling Panel Hoist Jack Lifter Construction Caster Wheels Lockable Tool (11FT)

  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools..
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • 【Quiet working】The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist..
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism..
Check Stock

FivePears Panel and Plywood Carrier,Metal Gripper For board,Drywall carrying tool …

  • √ 【HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC.】 : Fivepears presents one of the most advantage tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Fivepears Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch..
  • √ 【GRIP HANDLE FOR ONE-HAND CARRYING】 : This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover..
  • √ 【SOLID METAL CONSTRUCTION】: This drywall gripper is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use..
  • √ 【SELF-ADJUSTING GRIPPER CLAMP】: This piece of equipment by Fivepears has a ....
Check Stock

Drywall Lift Panel 11' Lift Drywall Panel Hoist Jack Lifter Jack Rolling Caster Wheel Sheetrock Drywall Lift Construction Tools (11FT)

  • 【Easy to assemble and disassemble】The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools..
  • 【Allows one person working alone】This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • 【Safe and in good balance】The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism..
  • 【150Lbs Load Capacity】This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • 【Quiet working】The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist..
Check Stock

Drywall Lift 11' Construction Rolling Caster Wheel Lockable Tool Panel Lift Drywall Panel Hoist Jack Lifter Jack Drywall Lift, Red

  • Allows One Person Working Alone: This drywall lift is perfect for DIY and residential use. The Panel Lift allows one person working alone to install drywall walls and ceilings.The Panel Hoist easy to position and tweak to get them exactly where I needed them..
  • Safe And In Good Balance: The drywall lift with wheel base. Wide enough to stabilize a 12 foot drywall sheet 15 feet above ground , The telescoping center of the Panel Lift does the actual lifting through a cable/ pulley mechanism. Turning the wheel reels in a 3/16th inch metal aircraft cableof the Panel Hoist..
  • Easy To Assemble And Disassemble: The drywall lift is very solidly built , The Panel Lift is easy to assemble and disassemble without tools. The Panel Hoist folds up nicely with good weight to strength ratio..
  • 150Lbs Load Capacity: This drywall lifter is made of heavy duty steel.The Panel Lift ensures its long life span. The Panel Hoist is load capacity is about 150 lbs..
  • Quiet Working: The drywall lift is almost no noisy and The Panel Lift is almost no squeeking soud when The Panel Hoist raise and lower the hoist..
Check Stock

Drywall Lift Panel Hoist 11'' Drywall Lift Drywall Panel Hoist Jack Lifter Jack Rolling Caster Wheel Lockable Drywall Lift Construction Tools with Adjustable Telescopic Arm Lockable Caster Wheel

  • 【Stable and Safe】Our new upgrade drywall lift uses bolts to replace the original screw, making the lift more stable. When you push the lift to the right place and prepare for commissioning, simply block the wheels with the brake to prevent the machine from slipping to ensure your safety..
  • 【Adjustable Angle & Height & Length】This drywall lift can be tilted 60° forward or backward and rotated 360°. The telescopic arm can be adjusted from 46in to 107in, which is perfect for installing sheet metal. And the height can be adjusted from 52in to 107in. ​It is commonly used in flat and inclined ceilings..
  • 【150Lbs Load Capacity】This plate lifter is made of premium-performance steel, which ensures it‘s longevity and durability. And it can be attached to flat ceilings, inclined ceilings or side walls with a maximum load of 150lb..
  • 【Easy to Lift】Use the drywall lift to replace manual operation, making your work faster and safer. You only need to hold the winch wheel and brake arm firmly, turn the winch to complete the lifting. Give it a try and free your hands!.
  • 【Easy to Assemble and Use】This plate lift is easy to assemble and disassemble without tools. Thanks to it's good weight and strength, the plate lift can be folded quickly and ea....
Check Stock

IMT Panel Carrier Heavy Duty Drywall Hand Clamps Power Gripper Plywood Sheetrock Handy Lifter for Wood/Board/Plastic/Sheet Metal Self-Adjusting from 0-1 1/8 Rate up to 200 Pounds

  • ❤️Sales Now: Limited time offer!❤️MAKES YOUR WORK A WHOLE LOT EASIER AND SAFER! — Instead of two guys awkwardly hauling sheets, this panel....
  • ❤️WORKS ON A VARIETY OF SHEET MATERIALS: This power gripper board lifter is ideal for heavy sheet goods such as drywall, plywood, metal sheets,....
  • ❤️SELF-ADJUSTING TO THICKNESS HANDY CLAMP】It makes the drywood carrier more simple to use. As soon as you start lifting, the clamp automatically....
  • ❤️SOLID CONSTRUCTION FOR STRENGTH: The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid....
  • ❤️PREMIUM QUALITY WITH EXCELLENT CUSTOMER SERVICE: The glass lifter through the CE, SGS, RoHS, PAHS certification. Your satisfaction is our #1....
Check Stock

Vosson Drywall Lift 16 Feet Panel Hoist Jack Rolling Lifter Drywall Ceiling Lift Lockable w/Caster Wheel Yellow, 150 lbs Capacity Drywall Panel Lift Hoist

  • 【Hoist Up on Walls or Ceilings】: This drywall lift 16 feet is ideal for installing 4' x 16' sheets, can be hoisted up on walls or ceilings, time and labor saving.
  • 【convenient and Fast Lifts tools】: This drywall panel hoist jack rolling lifter make your drywall projects quick and easy, save your time,and reduce your frustration.
  • 【150 Lbs Load Capacity】: The drywall lift's crank wheel and main support is very heavy, which Max load Capacity 150 lbs.
  • 【Safety and Efficient】: This drywall panel hoist jack rolling lifter's lock device and built-in winch brake get more safe and efficient.
  • 【16' Adjustable Height】: 6'to 16' Apply various Drywall panels up to 4ft*16ft 4" caster wheels for easy rolling.
Check Stock

Gator Lift Plywood and Sheetrock Panel Carrier 0 to 1 1/8 Grip Range 2 Pack

  • HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of....
  • GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person....
  • SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from....
  • EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and....
  • SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety....
Check Stock

MILLER ELECTRIC Miller 4pc MIG V-Groove Drive Roll Kit 227061

  • SPECIFICATIONS: The Magswitch Hand Lifter 60-M is a manual On/Off combination magnetic hand lifter/sheet dragger, for all your small steel handling needs. It eliminates the need to touch hot, sharp and dirty steel for increased safety. Complies with Occupational Safety lifting limits..
  • SAFE OPERATIONS: Magswitch Single Hand Lifters safely pick up hot, sharp or dirty steel with strong magnets. An ergonomic fixed handle and a lever locking mechanism prevent accidental release. Magnet turns completely On and Off so it stays clean to easily wipe off debris..
  • SIMPLE TO USE: Featuring Magswitch patented technology, the tool turns on and off with the simple 180 degree turn of a knob. Use for straight lift, or use the pivot handle for dragging sheet..
  • MULTIPLE USES: This device operates in two ways. The handle can be fixed or pivoting allowing use as a hand lifter or a sheet dragger. The tool has a super strong magnet that can lift up to 217 pounds. It also has a pipe groove for transporting various sizes of pipe. Picks up round or flat items..
  • DETAILS: Max Breakaway: 217 lbs/98,3 kg. Full Saturation Thickness: 0.2” / 5mm. Max Safe Shear: 48.5 lbs/22 kg. Minimum Thickness for De-Stack: 0.2” / 5mm. Net Weight: 1.7 lbs/0,75 kg. Overall Height: 140,05mm. Magnet....
Check Stock

FivePears Panel and Plywood Carrier,Metal Gripper for Board,Drywall Carrying Tool 2 Pack …

  • √ 【One-hand carrying】 : Ergonomic design for one person to lift and move sheet goods by one hand,simply place the clamp over the top and lift.
  • √ 【Application】 : Heavy Duty Holder for Carrying Dry Wall,Plywood - the most innovative tools for lifting and carrying all kinds of plywood,....
  • √ 【Special feature】: Grip handle for one-hand carrying, this panel/poly wood lifter features a durable , impact-resistant ABS handle that makes....
  • √ 【Materials】: The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The....
  • √ 【Easy on your back】: carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back....
Check Stock

VEVOR Drywall Lift Rolling Panel, 16ft Sheetrock Lift Drywall Lift, 150lb Weight Capacity Panel Hoist Jack Tool, Steel Material w/Telescopic Arm & 3 Lockable Wheels, 48x192 in Plasterboard Size

  • 150 lbs Load Capacity: This drywall lift is made of heavy-duty carbon steel, ensuring its longevity and durability. With a maximum load of 150 pounds, this drywall rolling lifter panel is ideal for home and commercial use..
  • Adjustable Height & Length: The telescopic arm can be adjusted from 4 to 9.5 ft, perfect for installing sheets. And the sheetrock lift drywall lift can reach a height of 16 ft that can help you attach to the ceiling..
  • 60° Tiltable Rotation Panel: Our drywall lift panel hoist can tilt 60° forward or backward and rotate 360 degrees. Thus, it is widely used in flat and inclined ceilings..
  • Secure & Good Balance: The cradle of the drywall hoist features locking outriggers. The entire unit is supported by a broad tripod base with 3 anti-slip locking casters for secure mounting. Thus, it is flexibly moving but stable enough..
  • Easy Assemble & Operation: The drywall panel lift hoist is easy to assemble and disassemble without tools. The hoist jack lifter features labor-saving with a winch. It is perfect for DIY and residential use, allowing one person working alone to install plasterboard or plank..
Check Stock