Reviews Manifold Spacer Kit

Tektall Intake manifold adapter Replace for TBI 5.7 350 adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 4-barrel Manifold Alloy Durable

  • 【Fitment】 Tektall Intake manifold adapter Replace for TBI 5.7 350..
  • 【Good Quality】 Made from a super durable and heat resistant composite material. This part is far better that a 1/2" or less steel or aluminum spacer.A full 1" thick . Bores match the bores of the throttle body and taper to match a 4 barrel intake without hurting airflow which is a proven way to increase TQ and airflow.Mounting holes to the manifold are slotted for tuning adjustments..
  • 【High performance】 Tektall Intake manifold adapter's bores are tapered in to adapt the wider TBI unit to the narrow Holley edelbrock pattern 4bl manifold. This is very important many adapters don't have this feature. This can cause poor performance that is blamed on the computer, injectors ect. when it is really the adapter..
  • 【Package includes】 1 X Intake manifold adapter, 1 X Gaskets, 1 X Mounting stud kit （Studs, nuts, and washers.） , 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Pirate Mfg 1/2\ Phenolic Intake Manifold Heat Spacer Kit 86-93 V8, Compatible with Mustang EFI 5.0L

  • Increases Horsepower By Reducing Heat In Upper Air Intake.
  • Kit Includes All Necessary Hardware For Install (as pictured).
Check Stock

Jandy DEV Filter Tank Bottom R0466500

  • Fits Zodiac Jandy DEV, DEL 48 pool filters.
  • Includes top spacer for DE grids, top spacer collar, breather tube assembly, DE manifold assembly, tie rod.
  • Also includes knob ans lock nuts, DE grid support, DE full size single grid, DE short span single grid and tie rod knob.
Check Stock

GOOFIT Fuel Filter 90 Degree Bent Intake Manifold Pipe with Intake Manifold Gasket Spacer Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler

  • Size:Intake Manifold Pipe:Inside diameter:18mm/0.71",27mm/1.07",Mounting hole 45mm/1.78".
  • Gasket Spacer:Opening diameter:19mm/0.75",distance between....
  • Replacement for 50cc 70cc 90cc 110cc 125cc Taotao Roketa ATV Dirt Bike Go Kart 4 Wheeler.
  • Replacement for 50cc 70cc 90cc 110cc horizontal engine ATV scooter carburetor.
  • Package including:Fuel Pump Petcock x 1pc,Intake Manifold Pipe x 1pc,Gasket Spacer x 1pair,GOOFIT keychain x 1pc.
  • Warranty:We are always available to help our customers.Please message us for replacement or refund if you are not satisfied with the order.
Check Stock

Zodiac R0501300 Complete Grid Assembly Replacement for Zodiac Jandy DEL and DEV Series Pool Filters

  • Fits Zodiac Jandy DEV, DEL 48 pool filters.
  • Includes top spacer for DE grids, top spacer collar, breather tube assembly, DE manifold assembly, tie rod.
  • Also includes knob ans lock nuts, DE grid support, DE full size single grid, DE short span single grid and tie rod knob.
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

Boomba Racing INTAKE MANIFOLD SPACER SILVER Compatible with Ford Focus ST RS 2.0 Fusion

  • Perfect replacement for 350Z roadster 2003‑2009 (non RevUp engine) and so on to meet your needs..
  • Specifically designed to help increase the manifold capacity and lower the intake air temperature..
  • Easy to install, direct to replace, no need any complicated tools or operations to save your time..
  • The manifold spacer is made of thermal polymer, comes with dramatic heat insulating properties..
  • According to the original factory specifications, replacing reference OEM number is BXIM‑40201..
Check Stock

Healthy Calendar Diabetic Cooking: A Full Year of Delicious Menus and Easy Recipes

  • Raises the intake manifold approximately 1/2".
  • Made in Wichita, Kansas From Aerospace Grade, USA Produced, Billet Aluminum.
  • Includes: 2 riser plates, 8 oring seals, and flange bolts (bolts for car intakes included).
  • LS Intake Manifold Spacer for Cathedral Port Cylinder Head.
  • Compatible with RPO code engines: LS1, LS2, LS6, LR4, LM7, L59, LM4, L33, LQ4, LQ9, LY2, L20, LH6, LY5, LMG, LC9, LS4, LH8.
Check Stock

Hooke Road 3.8L V6 Engine Throttle Body Spacer for Jeep JK Wrangler 2007 2008 2009 2010 2011

  • ➤ Hooke Road 3.8L V6 Engine Throttle Body Spacer fits for 2007 2008 2009 2010 2011 Wrangler JK 3.8L Models.
  • Cooler and denser air flow optimizes power and performance.
  • ➤ Throttle Body Spacer:1/2"" inch thick.
  • Moves throttle body 1/2” away from the intake manifold.
  • ➤ Easy bolt-on installation requires no drilling.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's（1999 & Newer ）With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Spank Spacer Kit (Orange, 3/6/12mm) Bike Headsets & Accessories, Bike Headset Spacer, Bicycle Headset Spacer for 1 & 1/8 Inch Stem, Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock

Spank Spacer Kit (Green, 3/6/12mm) Bike Headsets & Accessories, Bike Headset Spacer, Bicycle Headset Spacer for 1 & 1/8 Inch Stem, Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • `SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock

Spank Spacer Kit Purple 3/6/12mm Bike Headsets & Accessories Bike Headset Spacer Bicycle Headset Spacer for 1 & 1/8 Inch Stem Aluminium Alloy Bike Stem Spacers for MTB BMX Mountain Road Bikes

  • DIAL YOUR FIT WITH SPANK INDUSTRIES HEADSET SPACER KIT: Make your ride special with the Spank Industries spacer kit for bicycles. Greatly improve the fit and function of your headset with an affordable and stylish kit..
  • BRUSHED ANODIZED WITH LASER LOGO (12MM SPACER RING): Spank Spacer Kit for Bicycle is designed to make your ride a bit more comfortable. Using these spacers paired with your existing axle will allow you to achieve the comfort you want..
  • SPACER KIT WITH 3, 6 & 12MM HEADSET SPACER RINGS: With Spank Spacer Kit, you'll find the perfect balance of fit and function for your bicycle's performance. It includes 3mm, 6mm and 12mm headset spacer rings..
  • DIAMETER OF 1 & 1/8" (28.6MM): This kit includes everything you’ll need to give your bike a longer ride. Only compatible with Spank Spacer 1 and 1/8” (28.6mm) diameter headsets..
  • RECOMMENDED FOR: All mountain, enduro, trail, free ride, DH, E-Bike, XC, Gravel.
Check Stock