Reviews Manifold Installation Hardware Kit

Dorman 03107 Front Manifold Stud and Spring Kit - M10-1.5 x 77mm Compatible with Select Chevrolet / GMC / Oldsmobile Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 03123 Front Manifold Bolt and Spring Kit - 3/8-16 x 1-3/4; M10-1.25 x 67mm Compatible with Select Toyota Models

  • Ideal replacement - the manifold bolt and spring match the fit and function of the original equipment hardware, including bolt diameter, thread pitch and head type.
  • Complete installation - this kit includes hardware required for securely attaching the manifold to the exhaust system.
  • Trustworthy construction - the kit's bolt and spring are made of hardened steel for durable, long-lasting service life.
  • Quality tested - kit components have undergone extensive testing to ensure proper function and long service life.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Tektall Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs Alloy Durable

  • 【Fitment】Tektall Alloy Intake manifold adapter for TBI adapts a small block 1.75" bore throttle body injection 1" thick Fits Pattern 2-barrel Manifold 500 350 CFM early carbs..
  • 【Good Quality】 It is made of solid alloy with high finish. The installation hardware and installation sealing gasket are as shown in the figure. It can be installed without purchasing additional bolts. Everything you need is in the package, as shown in the picture. Please use studs if possible, do not over-tighten, and the correct design is suitable for its intended application without vacuum leakage..
  • 【High performance】 Tektall intake manifold adapters are threaded into smooth aluminum castings to safely install carbohydrate studs. The shape of the holes provides a smooth transition from carbohydrates to air intakes. Just turn the key and it will start immediately. It will definitely improve your throttle response..
  • 【Package includes】 1 X Intake manifold adapter, 2 X Gaskets, 1 X Mounting Hardware kit, 1 X Manual..
  • 【NOTE】 Please confirm the item if it matches your machine before you purchase. All Tektall products will undergo strict inspections and strong packaging before shipment.Please rest assured to purchase.Thanks..
Check Stock

Dorman 03309 Exhaust Manifold Hardware Kit Compatible with Select Models

  • Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on....
  • Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Dorman 03415B Exhaust Manifold Hardware Kit Compatible with Select Acura / Honda / Isuzu Models

  • Direct replacement - this exhaust manifold hardware kit matches the original hardware required to secure the exhaust manifold to the engine on specified vehicles.
  • Ideal solution - this kit is a reliable replacement for the original hardware that is missing or damaged, or has failed.
  • Durable construction - this kit is made from quality components to ensure reliable performance and a long service life.
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience.
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
Check Stock

Universal Air Conditioning HA10458C Manifold And Tube Assembly

  • Air Locker Manifold Kit enables the installation of Air Locker solenoids to an ARB Twin Compressor.
  • Complete manifold kit to suit Air Locker solenoid mounting on the ARB On-Board Twin Air Compressor Kits..
  • This kit includes a manifold body with mounting bracket, BSPP ports, NPT ports, high temperature resistant braided hose, NPT connection nipples and M6 hex head bolts and nylon lock-nuts which secure this kit..
  • This manifold permits you to lock the front and rear air lockers without needing a compressor for each..
Check Stock

Aluminum Exhaust Manifold Header Gasket Set Compatible with 07-11 Jeep Wrangler

  • ▶️ Aluminum Reinforced Graphite Exhaust Manifold Gasket.
  • ▶️ Complete Hardware Kit for Installing Aftermarket Header to your Vehicle.
  • ▶️ Great for Replacement of Missing or Damaged Gaskets.
  • ▶️ Installation Instruction is NOT Included.
Check Stock

A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor\A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor

  • Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor "A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor.
  • This A-Team Performance air conditioning manifold fitting kit will allow you to complete the installation of your vehicle's A/C system.
  • Allow you to complete the installation of your vehicle's A/C system..
Check Stock

DNA Motoring GKTSET-CC93LT1 Aluminum Exhaust Manifold Header Gasket Set Replacement,Metallic

  • Aluminum Reinforced Graphite Exhaust Manifold Gasket.
  • Complete Hardware Kit for Installing Aftermarket Header to your Vehicle.
  • Great for Replacement of Missing or Damaged Gaskets.
  • Installation Instruction is NOT Included.
Check Stock

Aluminum Exhaust Manifold Header Gasket Set Compatible with 90-96 300ZX 3.0L Engine Non Turbo

  • ▶️ Aluminum Reinforced Graphite Exhaust Manifold Gasket.
  • ▶️ Complete Hardware Kit for Installing Aftermarket Header to your Vehicle.
  • ▶️ Great for Replacement of Missing or Damaged Gaskets.
  • ▶️ Installation Instruction is NOT Included.
Check Stock

Aluminum Exhaust Manifold Header Gasket Set Compatible with 90-01 Acura Integra LS/RS/GS 1.8L

  • ▶️ Aluminum Reinforced Graphite Exhaust Manifold Gasket.
  • ▶️ Complete Hardware Kit for Installing Aftermarket Header to your Vehicle.
  • ▶️ Great for Replacement of Missing or Damaged Gaskets.
  • ▶️ Installation Instruction is NOT Included.
Check Stock

Tektall Alloy 1\ Intake Manifold Spacer Replace for Ford GT-40 5.0 Mustang explorer Cobra 1987-1993 Durable

  • 【Good Quality】 Tektall 1" Intake Manifold Spacer made of High quality alloy.Sturdy and durable, and has reached OEM specifications..
  • 【Fitment】Tektall Alloy 1" Intake Manifold Spacer fit for Ford Mustang 5.0L GT-40 explorer Cobra 1987-1993 year..
  • 【Product Dimension】 THICKNESS 1" Made of High quality alloy..
  • 【High Performance】Tektall Intake Manifold Spacer can reduce heat transfer from the engine to the intake manifold. The result is a colder IAT (don’t forget, colder air is more dense, which means more horsepower!). The end result is increased horsepower and allowed to increase time with fewer explosions..
  • 【Package Includes】 1 X Intake Manifold Spacer, 2 X Gaskets, 1 X Mounting Hardware kit. Please confirm the item if it matches your machine before you purchase..
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock