Reviews Manifold 3 Way Fitting

Air Outlet Kit for 3\\/4 Inch Tubing System with 1\\/2 Inch NPT Outlet Port (Base Kit)

  • Material: 6061 anodized Aluminum for the manifold.
  • Brass material with Nickel plating for fitting and drain valve.
  • Working Pressure: 200 psi maximum working pressure.
  • Thread Size: 1/2 NPT threads at on the front, top and bottom of the manifold( 3 ports).
  • Kit includes: Aluminum manifold, Drain ball valve, 1/2 inch NPT straight fitting and PTFE Tape.
  • Installation: Easy installation and the tubing also can be removed if needed.
Check Stock

MASTERCOOL HVAC Digital Manifold Complete Kit with 72 Standard Hoses MSC-99772-A

  • HIGH QUALITY: High quality rubber make the AC Diagnostic Manifold Gauge Sets Shockproof and shatter-resistant. Aluminum forged MANIFOLD body with (3)....
  • GAUGE PRESSURE RANGE: Burst pressure: 600-3000Psi working/bursting pressure. Blue gauge (low): 0-350 PSI.
  • QUICK DISCONNECT COUPLERS: High & Low pressure fittings included.
  • Each coupler have a shut off valve to prevent loss of refrigerant.
  • CONTENTS: Include 3-Colored 5 Ft/60 Inch Red/blue Charging Hoses, 1/4 Sae fitting on both sides for Red & blue, 1/2 Acme fitting on both sides for....
  • APPLICATION: R134A Professional Manifold Gauge Set. Ideal for R134A, R404A, R407 refrigerants.
  • Designed for AC Freon charging, evacuation (vacuum),....
Check Stock

Eastwood First Air Pipe for Dual Blaster Replacement Air Line 10 Inch

  • Replacement Air Line For Dual Blaster To Connect Tank To Manifold.
  • This Is The Line Approx 10 in. Length That Attached To The Tank At The Fill Opening Fitting.
Check Stock

SMC KM13-06-08-3 PBT Push-To-Connect Tubing Manifold, 2 Inlets-8 mm, 3 Outlets-6 mm Tube OD

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor\A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor

  • Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor "A-Team Performance - Air Conditioning AC Fitting Manifold Kit - for SD7 Compressor.
  • This A-Team Performance air conditioning manifold fitting kit will allow you to complete the installation of your vehicle's A/C system.
  • Allow you to complete the installation of your vehicle's A/C system..
Check Stock

Loc-Line - 32094 Coolant Hose Component, Acetal Copolymer, In-Line Valve, 1/2\ Hose ID, 20 PSI (Pack of 2)

  • Kit includes 2 piece 1/4" segments, 1 piece 1/4" MNPT valves, 1 piece 1" flare nozzle, 1 piece 1/4" round nozzle, 1 piece 1/8" round nozzle, 1 piece 1/16" round nozzle.
  • Also includes 1 piece magnetic base manifold, 3 piece 1/4" plug, 1 piece 1/4" barb fitting.
  • Magnetic Manifold allows distribution of coolant through 4 separate openings from one source.
  • Magnet can mount on spindle or worktable for convenient access to the work piece.
  • 1/4" ports accept any 1/4" standard fitting.
Check Stock

Power Steering Pump W/Bracket & Chrome Pulley, Chrome Saginaw Style, Compatible with Chevy SBC

  • Kit includes: (1) New Chrome Saginaw "Key-Way" Power Steering Pump, (1) Chrome Steel Pump Bracket Kit, (1) Chrome Groove Pump Pulley(5-3/4" diameter), (1) Chrome Power Steering Pump Cap.
  • 1975 and later vehicles will require a new hose to go from a metric o-ring style to the 5/8" Inverted flare.
  • A different bracket must be used if your alternator is mounted over the exhaust manifold towards the outside of the head..
  • A 3 groove crank pulley may be required for use with short water pumps.
  • Female 5/8"-18 inverted flare fitting for the high pressure outlet.
Check Stock

SMC KM11-07-11-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-3/8\

  • Port A One-touch Fitting, Port B One-touch Fitting.
  • One-touch fittings give the most efficient operation.
Check Stock

ARB 12 Volt High Performance Twin Air Compressor & E-Z Deflator Airline Tire Inflation Kit & Air Locker Manifold Kit

  • Boost Projects Custom Kit Includes: ARB 12V High Performance Twin Air Compressor & E-Z Deflator & Airline & Tire Inflation Kit & Air Locker Manifold....
  • Air Compressor Kit Includes: Fully assembled and tested air compressor (12V). Complete wiring loom w/ Air Locker solenoid plug-in terminals.....
  • Manifold Kit Includes: Manifold body with mounting bracket. 2x 1/8_ѝBSPP ports for installation of up to 2 x Air Locker solenoids. 2x 1/4_ѝ NPT....
  • E-Z Deflator Kit: The unique, patented design of the E-Z deflator allows for removal of the valve core for rapid tire deflation, while also providing....
  • Tire Inflation Kit Includes: 1 x High heat pressure hose (18ft long) 1 x ARB air chuck with quick press fitting 1 x ARB T-fitting for use with the....
Check Stock

HZAUTOS 3-Way Manifold Gauge for R410A, R22, R134a, R404A Refrigerants with Aluminum Valve, Hoses, Couplers, Can Tap, Valve Core Wrench, with Gilcerol Dial Design for Shock Absorption

  • 【Glicerol dial design】The manifold gauge is filled with glicerol, which can protect the pointer well and have the shock absorption effect during transportation and operation. The gauge with gilcerol dial can have longer service time than others..
  • 【Good-quality materials】The manifold gauge set is made of aluminum + PVC + plastic, which is durable and can stand heavy use. You can easily see the refrigerant movement and conditions during the operation via the sight glass. The case with rubber coating is also for collision prevention and shock absorption..
  • 【3-color hoses】The 3-way manifold gauge is equipped with 3-color hoses, it can be recognized easily. Red for high pressure, blue for low pressure, yellow for vacuum pump or refrigerant bottle. The burst pressure can stand 3000PSI, the max working pressure is 600PSI..
  • 【Durable hose connectors】The connectors of manifold gauge set is made of copper and nylon accessories, which can prevent leakage of refrigerants, avoid environmental and health problems, and protect your equipment during the operation..
  • 【Complete package】1* 3-way gauge with glicerol dial, 3* 35″hoses, 2* quick couplers, 1* can tap, 1*value core wrench, 1* screwdriver, some accessories for replacement.
Check Stock

Dorman 615-188 Engine Intake Manifold Compatible with Select Ford Models

  • Ideal replacement - this intake manifold is engineered to reliably replace the original equipment manifold on select Ford vehicles with 5.4L V8 engines.
  • Made in USA - designed, engineered and manufactured in the United States to deliver consistent quality and precise construction.
  • Proven design - features multiple improvements that make it look slightly different than the factory design but still match factory fit and performance.
  • Complete kit - includes manifold, auxiliary coolant fitting, thermostat, specially designed gaskets, O-ring and self-tapping screws.
Check Stock

Quluxe 1 Pack 3 Ways Aluminum Alloy Pneumatic Manifold Air Distribution Block, G1/2 Supply Port, G1/5-Inch Output Port, Silver

  • 1/4" BSP Female 2 Way 4 Port Solid Aluminum T-Shape Pneumatic Fitting Air Manifold Block Splitter.
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
  • Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
  • Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
  • Easy-to-use: Instruction manual included.
  • Includes a variety of adapters ideal for most vehicles.
  • 4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
  • Extra-long rubber hose and 14mm/18mm manifold adapter.
  • Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
  • Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27....
Check Stock