Reviews Malleable Iron Casting

Heavy-Duty Malleable Casting Iron Wall Jack for Lifting Wall Beams Decks and More with Capacity of Lifting 1,000 lbs, Red, Pack of 1

  • 1.Lifting Wall Easily – Designed to lift up walls, beams, or more into the vertical position or the desired position..
  • 2.Work Alone – Allows a single person to safely raise a fully sheathed wall by the wall jack, lifting a wall with no help.
  • NOTE: Do not stand under the wall when working.
  • For large walls, two wall jacks are recommended in use..
  • 3.Casting Iron – Made of heavy-duty and durable malleable casting iron which is weather-resistant and reusable.
  • 4.1 " OD Pipe and 2" x 4" Pole – OD 1" pipe can be used as a lever that wall will be lifted up along the 2"x 4" (actual size is 1.5" x 3.5") pole. NOTE: Please use a clear straight-grained 2" x 4" pole that is free of all knots or defects.
  • 5.Package Included - 1 pack of Wall Jack (1” pipe and 2"x4" pole are not included).
  • Backs its products with 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

3230BC 3/4\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

3230BC 5/8\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

3230BC 3/8\ Zinc Plated Wire Cable Clamp

  • Designed for forming an eye or loop on wire rope.
  • Meets torque value of Federal Specifications FF-C-450D, Type 1, Class 2.
Check Stock

1\ Pipe Fitting Tee DN25 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1\)

  • SIZE&QUANTITY: DN15 1/2-Inch pipe fittings compatible with standard 1/2-Inch pipe nipples. We send you 10 PCS pipe tees(size:1.37*1.12*1.79inch). It’s enough for you to DIY your furniture..
  • MALLEABLE CAST IRON - High quality malleable cast iron is perfectly anti-rust in oil and gas. Durable and no flexibility cast iron always used in many industry buildings. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use...
  • WIDE APPLICATION - You can use these pipe fittings to install a durable iron frame f or your pipe shelving, wall lamp or other home décor..
  • EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the tees and elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check Stock

1/2\ Pipe Fitting Tee DN15 Threaded Cast Black Malleable Iron for Steampunk Vintage Shelf Bracket DIY Plumbing Pipe Decor Furniture (10, 1/2\)

  • SIZE&QUANTITY: DN15 1/2-Inch pipe fittings compatible with standard 1/2-Inch pipe nipples. We send you 10 PCS pipe tees(size:1.37*1.12*1.79inch). It’s enough for you to DIY your furniture..
  • MALLEABLE CAST IRON - High quality malleable cast iron is perfectly anti-rust in oil and gas. Durable and no flexibility cast iron always used in many industry buildings. But malleable cast iron is unprocessed and needs to be cleaned and sealed to prevent rust before use...
  • WIDE APPLICATION - You can use these pipe fittings to install a durable iron frame f or your pipe shelving, wall lamp or other home décor..
  • EASY TO USE - These pipe fittings are threaded, just connect the threaded rods or pipes to the tees and elbows, you can easily to build any shape of frame and shelf for a DIY furniture as you like. Don’t need any screws..
  • 100% MONEY-BACK GUARANTEE - We offer 90 days unconditional refund or replacement service if there are any quality issues. Contact us at any time and we will give you a satisfying answer. Just take a chance of our corner braces and we promise that you will not be disappointed..
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 3\ Overall Length, 0.125\ Cutting Diameter, 0.125\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 4\ Overall Length, 0.1875\ Cutting Diameter, 0.1875\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

YG-1 - 55901 E5065 Carbide Square Nose End Mill, Extra Long Reach, Uncoated (Bright) Finish, 30 Deg Helix, 4 Flutes, 6\ Overall Length, 0.25\ Cutting Diameter, 0.25\ Shank Diameter

  • Suitable for general-purpose machining on hardened and high-alloy steel, steel casting, malleable cast iron, chromium-nickel steel, brass, copper, aluminum with a high percentage of silicon, and abrasive plastic.
  • Extra-long-length end mills have longer cutting edges and can make deeper cuts than long-length end mills.
  • Four flutes produce a better finish than fewer flutes.
  • Carbide can run at higher speeds than high-speed or cobalt steel, resisting wear and high cutting temperatures.
  • Uncoated (bright) tools have no additional surface treatment or coating for use on a broad range of materials.
Check Stock

Neiko 20709A Heavy Duty Auto Body Hammer and Dolly Kit 7 Piece

  • Comes with Included Storage/Carrying Case.
Check Stock

Bulk Iron Filings- 1 LB Iron Filings for Science Experiments, by American Heritage Industries

  • Perfect for Cold Casting: Our Artmolds very fine Iron powder is perfect for cold casting and helps to make the iron made DIYs for your home and offices.
  • Very Fine Iron Particles: Our Artmolds Iron powder comes with 1lbs (453.6 Grams) and 325- Mesh powder which is considered as very fine and odourless particle for the cold casting and moulding.
  • Very Easy And Simple To Use: Our Artmolds Iron powder is a very simple and easy cold casting formula using polyurethane resin. Just combine, mix well and pour into the mold.
  • Your Creativity Will Never Lose Shine: Are you afraid if your collection may lose shine in future? Don't panic. Our artmolds iron powder contains very fine particles of iron and the shine can retain by just polishing using rosin and polishing wheel.
  • Mould your Creativity Into a Shape: Try our Artmolds fine particle Iron powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock

Lucas shops 1\ 5 Way Pipe Fitting Malleable Iron Black Outlet Cross Female Tube Connector (1 Inch)

  • Specification: Size(inch) Nominal Diameter(mm) Color 1 25 Black.
  • Material: Malleable Iron Type: Outlet Cross Connection: Female Quantity: 1Pc.
  • Features: 1. Made of malleable iron for tensile strength, galvanized for corrosion resistance, solid and durable. 2. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries. 3. Cross for connecting and branching five pieces of pipe. 4. For connecting to male pipes..
  • Package Included: 1 x Outlet Cross Pipe Fitting.
Check Stock

ArtMolds Fine Iron Powder for Cold Casting and Molding - Polyurethane Resin for Making Sculptures and Statues | Home and Office Decors - 1 Lb/325-mesh

  • Perfect for Cold Casting: Our Artmolds very fine Iron powder is perfect for cold casting and helps to make the iron made DIYs for your home and offices.
  • Very Fine Iron Particles: Our Artmolds Iron powder comes with 1lbs (453.6 Grams) and 325- Mesh powder which is considered as very fine and odourless particle for the cold casting and moulding.
  • Very Easy And Simple To Use: Our Artmolds Iron powder is a very simple and easy cold casting formula using polyurethane resin. Just combine, mix well and pour into the mold.
  • Your Creativity Will Never Lose Shine: Are you afraid if your collection may lose shine in future? Don't panic. Our artmolds iron powder contains very fine particles of iron and the shine can retain by just polishing using rosin and polishing wheel.
  • Mould your Creativity Into a Shape: Try our Artmolds fine particle Iron powder at your home and office decors and enhance your creativity level and feel artistic.
Check Stock