Reviews Male Adapter Fittings

Universal 8mm Quick-Disconnect Plug Adapter Stainless Steel 1/8 BSPP Female Thread PCP Paintball Charging Fittings with Sealing O-Ring

  • Material - This 1/8" BSPP female thread quick disconnect plug is made of high-quality Stainless steel, Size: 26mm / 1.02 inch Length, male quick....
  • Accuracy - Use NC machining, accurately, accurately, suitable for 8mm converter plug and 1/8" BSPP male thread, supplied with sealing ring washer,....
  • Easy to Operation - Simply connect each fill adapter to the quick disconnect air tool fittings, It can withstand 3000-5000 psi pressure, this is one....
  • Quick Connect Adapter - Quick disconnect a male to female thread air tool fittings, will allow you to move air from one tank to paintball, to move air....
  • Application - Inflatable cylinder fittings connect to high pressure hose, compatible with PCP airsoft, air gun, paintball, paintball tanks and SCBA....
Check Stock

(2 pcs) Drettyer Brass Pipe Adapter Plumbing, G Thread 1/2" Male to NPT Thread 1/2" Male Pipe Fitting Adapter 2 inch long, Seamless and Leakproof

  • ✅Size - G1/2" Male ,NPT 1/2 " Male,2 inch length..
  • ✅Material - High grade solid brass, strong and wear resistant, more durable than iron and iron galvanized pipe fittings.Brass is corrosion resistant and can be used in wet environments..
  • ✅Purpose - G1/2" Pipe fittings Male Thread Water Pipe to 1/2" NPT Adapter.It can be applied to most of the pipes or fittings adapters, or a variety of scene needs..
  • ✅Seamless Connection - Metric BSP 1/2" (G) male to NPT 1/2" male pipe fitting converter (Brass).The seamless close nipple brass fittings and the overall threaded design will make the installation seamless.This will be more beautiful..
  • ✅Tips - Drettyerr is committed to providing quality products. The deeper and smoother thread design will make the installation process easier and more efficient.(Please note, NPT Thread Size is a nominal pipe size and it does not represent the actual diameter.).
Check Stock

Class A Customs 13 Gallon Water Tank & Plumbing Kit T-1300-BPK

  • ...Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • 13 GALLON TANK MEASUREMENTS 21” x 9” x 16”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
  • BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adapter (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adapter (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adapter (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
Check Stock

POHIR Pressure Washer Adapter Set, 14-Pack Quick Connect Fittings, 3/8 Power Washer Quick Disconnect Kit with M22 Swivel to 3/8'' Quick Connect, 3/4\ to Quick Release and M22 15mm to 14mm Male

  • 14-Pack Quick Connect Kit - 4-pieces Metric M22-14 female to 3/8 quick plug, 2-pieces m22 14mm female to 3/8 quick disconnect, 2-pieces M22 14mm male to 3/8’’ quick disconnect, 2-pieces M22 14mm male thread to m22 14/15 male, 2-pieces 3/4 female to 1/2 quick connect, 2-pieces 1/2 plug to 3/4 male.
  • Easy Connect & Disconnect - M22 quick connect fittings help pressure washer hose quick connect to pressure washer pump or gun. The 3/4 quick coupler fits all 3/4" GHT (garden hose thread) watering equipment..
  • M22 Male to Male - 1x M22 15mm male to 14mm male and 1x M22 14mm to 14mm male adapter, convert the metric M22 14mm male thread to the M22 14mm or 15mm swirl as needed..
  • High-Quality Brass Quick Connect - Made of solid brass, stainless steel and engineering plastics, for a safe and leak free connection. These quick connect fittings are durable, rust proof, providing secure fittings and are convenient for frequent connection. .
  • Warm Tips: Inner diameter of M22 -14 swivel is 14MM NOT 15mm. Do NOT use the threaded 14MM to connect M22-15mm fittings, or it will cause leakage. Please lubricate the accessories before use..
Check Stock

REGNHLIF 2 Pack 3/4 Inch Male to 1/2 Inch NPT Male Connector, Brass Garden Hose Fitting, Male Hose Adapter

  • Connects to a female 3/4″GHT threaded connection on one end and a female 1/2″NPTF connection on the other.
  • 1/2″ to 3/4″ hose adapter, Adapter for connecting hose or fittings of different types.
  • Package Include: 2 Pack 3/4 inch GHT Male x 1/2 inch NPT Male Connector.
  • Made with precision process, no leaking and durable, easy to connect and disconnect.
  • Brass Pipe Fittings for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Check Stock

EVIL ENERGY Female AN10 to Male AN8 Flare Reducer Hose Fitting Adapter Black

  • These reducer adapter hose fittings are designed to quickly make converting female connection to male. Designed for smooth flow that gives better....
  • Multi Sizes Supplied:Available in 5 sizes : Female AN6 to Male AN4 ， Female AN8 to Male AN6 ， Female AN10 to Male AN6 ， Female AN10 to Male AN8....
  • APPLICATION- EVIL ENERGY Flare Reducer Hose Fitting is widely used in Oil/ Fuel/ Water/ Fluid/ Airline etc..
  • The hose reducer fittings are made of high-quality aluminum alloy material for strong strength. Anodised and hand polished finish add the final touch....
  • ENVIRONMENTAL FRIENDLY- Flare Reducer Fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality....
Check Stock

Tool Daily Pressure Washer Adapter Set, M22 to 3/8 Inch Quick Connect, 3/4 Inch to Quick Disconnect, Male M22 Hose Adapter, 9-Pack

  • ATTENTION: M22 14mm female fitting has 14mm inside plug, If pressure washer needs 15mm, it will cause leakage. NOT FIT electric pressure washer of Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell..
  • 9-pack High power washer quick connect fittings include: 2-pieces Metric M22-14 female to 3/8’’ plug, 2-pieces 3/8’’ quick disconnect to M22 14mm male, 2-pieces 3/4’’ female to 1/2’’ quick connect, 2-pieces 1/2’’ plug to 3/4’’ male, 1-piece M22 14mm male to M22 14mm male..
  • M22 pressure washer quick connect fittings helps pressure washer hose quick connect to pressure washer pump or gun..
  • 3/4″ Garden Hose Quick Connector Sets connect all 3/4″ standard garden hose to water inlet of power washer pump..
  • Pressure washer hose adapter has double M22 14mm male NPT ends. It converts the female M22 fitting of pressure washer hose to male M22 end. All high replacement couplers provide secure fittings and are convenient for frequent connection. Their working Pressure is rated to 5000 PSI..
Check Stock

Craftsman 20-pc Air Accessory Kit (CMXZTSG1139NB)

  • Starter Kit: includes essential accessories needed to equip a new air compressor.
  • Applications: Attachments included for inflating tires, sport balls and air mattresses.
  • connecting compressor to air hoses and air tools.
  • Recoil hose connects to all included accessories with included quick-connect fittings.
  • Specifications: standard 1/4-inch NPT male or female threads.
  • Includes: recoil air hose, 2 - sport ball inflation needles, blow gun, safety nozzle, rubber nozzle, tapered nozzle, blow gun nozzle adapter, 2 - 1/4-in female brass quick-connect couplers, 3 - male steel quick-connect plugs, 2 - female steel quick-connect plugs, dual-chuck tire inflator, 1/4-in male adapter, 1/4-in female adapter, tire pressure gauge, and thread sealant tape.
Check Stock

EVIL ENERGY 6AN to 6AN Male Flare Coupler Union Straight Fuel Hose Adapter Fitting Black 2 PCS

  • Package Included: 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter.
  • Thread size of 6AN male coupler is 9/18-18 JIC, can use to splice or extend a line, works with female thread fitting..
  • Black 6061-T6 aluminum 6AN flare union work temperature: -65 to +252 degree F, max pressure: 1000 psi, ultimate torque: 25N..
  • Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system..
  • Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..
Check Stock

SpringSpray 1-1/2\ NPT Male x 1-1/2\ NST (NH) Male Brass Hexagonal Nipple Fitting Fire Equipment Hex Nipple Doule Male Fire Hose Adapter

  • ...UE DESIGN】- With hexagonal section in the middle for an increased bearing surface when adjusting the fitting with a wrench. Hex tube fitting as a short length of pipe with threaded ends for connecting threaded pipes.
  • ⚒【WIDE APPLICATION】- Male to male adapters are used to bridge two female hose, pipe or valve fittings. Suitable for use in general firefighting applications. Brass fire hydrant adapter fittings are used for connecting fire hose, PVC pipe, and other low-pressure pipes in the fire brigade, industry, refinery, building industry, agriculture, shipping, military, and civil protection.
  • ⚒【100% SATISFACTION SERVICE】-We have a professional product development team. If you have any questions about compatibility or any dissatisfaction, please feel free to contact us and we will help you solve it perfectly.
Check Stock

GASHER 15PCS Brass Pipe Fitting Hex Bushing Reducer Adapter Reducing Hex Nipple 3/8 Inch NPT x 1/4 Inch NPT

  • Reducer Adapter: Premium solid brass with thicker wall, more durable than iron and iron galvanized pipe fittings, 1/4" NPT male pipe x 3/8" NPT female....
  • Reducing Hex Nipple: Reducing hex nipple for connecting two threaded pipes with different diameters. Male National Pipe Taper (NPT) threads for....
  • Hex Bushing: Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or....
  • These fittings are not allowed to be installed for potable water,NPT thread size does not actual diameter, it is only nominal pipe size..
Check Stock

Van Enterprises 2\ Bulkhead Tank Fitting Adapter with 2\ SCHEDULE 80 Male Adapter Kit for Rain Barrels, Aquariums, Water Tanks, Ponds

  • 2" uPVC Bulkhead Fitting [NPTxNPT] with 2" SCHEDULE 80 Slip Socket Male Adapter Kit.
  • Locking Nut is REVERSED THREADED. The Best Bulkhead Fitting in its class with THICK PREMIUM silicon seal gasket that will contour to the shape of the round barrels.
  • Premium Grade SCHEDULE 80 2" Male Adapter. UV resistance. Will not fade, crack, or peel. Durable and longer lasting PVC versus standard plastic bulkhead fittings.
  • Flexible Configuration with 2" SCHEDULE 80 Male Adapter that can be Socket x Thread or Thread x Socket.
Check Stock

Anderson Metals Brass Garden Hose Fitting, Connector, 3/4" Female Hose ID x 1/2" Female Pipe

  • Connects to a male GHT on one end and a male NPT threaded connection on the other.
  • Adapter for connecting hose or fittings of different types.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock