Reviews Makita Double Bevel Mitre Saw

DEWALT Miter Saw, 12-Inch, Double Bevel, Compound, XPS Cutline, 15-Amp (DWS716XPS)

  • Stainless-steel miter detent plate with 14 positive stops delivers repeatable accuracy and worksite durability for the 12-inch miter saw blade..
  • Tall sliding fences of the mitre saw support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against fence..
  • Double-bevel design of DEWALT miter saw allows saw to bevel 0 degree - 48 degree to the left and right with positive stops at 0 degree, 22.5 degree, 33.9 degree, and 45 degree.
  • 0 degree - 50 degree left and right miter capacity.
  • Cam lock miter handle with detent override delivers quick and accurate miter angles..
  • LED work light system provides adjustment-free cut line indication for accuracy and visibility..
Check Stock

DEWALT 20V MAX* 7-1/4-Inch Miter Saw, Cordless (DCS361M1)

  • DEWALT 20V miter saw utilizes 20V Max* battery pack (DCB204) which provides on average 183 cuts of 2x4 Pine or 275 cuts of 3-1/4 pine baseboard.
  • Integrated cut line cross-cut positioning system provides adjustment-free cut line indication for better accuracy and visibility for the mitre saw.
  • DEWALT miter saw has the capacity to cup 3 5/8-inch nested crown and 3 1/2 base vertically.
  • Adjustable stainless steel miter detent plate with 11 positive stops improves productivity and ensures cutting accuracy,.
  • Oversized bevel scale makes bevel angle adjustments accurate and easy.
  • Compact, lightweight design (31.6 bs.) allows for easy transport and storage.
  • Cam lock miter handle delivers quick and accurate miter angles.
  • Precise miter system and machined base fence support optimize durability and cutting accuracy.
Check Stock

GreatNeck BSB14 12 Inch Mitre Box with 14 Inch Back Saw Reinforced Steel Back Saw for Accurate Cutting Preset 45 Degree and 90 Degree Cuts Saw with Box

  • MITRE BOX AND SAW: These mitre boxes with hand saws are designed to cut soft and hard woods commonly used in molding and trimming applications.
  • REINFORCED BACK SAW: This mitre box saw set includes a reinforced steel back saw for wood for accurate cutting.
  • PRESET CUTTING BOX: Our mitre saw box has convenient preset cuts for 45 degree and 90 degree angles, allowing for precisely beveled corner cuts.
  • RULER EDGE INCLUDED: The mitre box in this precision saw set includes a built-in 8-1/2 inch ruler edge for quick measurements and precise cuts.
  • DURABLE ANGLE BOX: This compact mitre saw set comes with a high-impact polystyrene mitre box and a steel back saw with a high-impact plastic saw....
Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

  • Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
  • Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
  • Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
  • 4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
  • Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....
Check Stock

Makita 194368-5 55\ Guide Rail

  • 55" guide rail for use with Makita Plunge Saw models XPS01, XPS02, and SP6000J.
  • Interacts with the saw base and engineered to deliver smooth, dead-on straight or bevel cutting.
  • Alternate use with select routers and circular saws, must use with router guide rail adapter (194579-2) and saw guide rail adapter (196953-0).
Check Stock

wolfcraft Angular Bevel Gauge for Mitre Saws I 6957000 I For measuring and transferring angles

  • for measuring and transferring wall angles from 30 to 180 and subsequent alignment of the angle at the mitre saw.
  • automatic angle bisector for the correct mitre cut makes your work easier and reduces errors.
  • incl. telescopic corner callipers for outside corners and foldable stop for easy marking at the workpiece.
  • for measuring and transferring wall angles from 30 to 180° and subsequent alignment of the angle at the mitre saw.
Check Stock

Miter Saw, SMADRON 12inch Double-Bevel Sliding Compound Glide Miter Saw, Chop Saw with Laser marker, 15Amp Motor, 40T Blade for Wood Cut

  • ...Compound Miter Saw with Powerful Motor】The 15-amp/1800W with 3800rpm motor delivers high power to smooth and fast cutting on carpentry work. And the 12-inch blade comes with sharp 40 teeth makes easy work of cutting and bevel cut. An ideal tool for fine woodworking, carpentry, general construction, and more..
  • 【Double Bevel Saw】The double bevel design enables the saw to bevel around 0-45 degrees and the miter angle be in a range of -45-0-45 degrees, that can meet different bevel cutting needs. The cut capacity up to 4.13x13.19 inches at 90 degree and 2.36x13.19 inches at 45 degree, offers more possibilities for your work than a single-beveled miter saw..
  • 【User-Friendly Design】With 2 extendable side pieces, the miter saw offer a larger work table to meet your requirement of large pieces cuts, and the clamping device system helps for better material support to secure work piece. An efficient dust bag is equipped to collect more than 70% of the dust produced, keeping your work environment clean and tidy..
  • 【Precision & Safety】Adjustable miter scale with precise stops (-45°/-30°/-22.5°/-15°/0°/+15°/+22.5°/+30°/+45°) ensures clean and accurate bevel cuts. Built-in visible laser indicator for increased cutting accuracy and predictable bla....
Check Stock

QWORK Multifunction 12” Mitre Box with 14” Back Saw 45° hole slot

  • Size: 12" Mitre Box , 14" Back Saw, 45° hole slot..
  • Durable: The saw blade is made of premium steel, double-sided mechanical grinding, wear-resistant, and absolutely sharp..
  • Ergonomic design: The handle of the saw is made of ABS engineering plastic and TPR plastic for a comfortable grip and save labor..
  • Safe to Use: The gap of the chute box is 2cm, the thickness of the saw is 1.2cm, when using the saw, the saw will not cut into the box..
  • Use Tip: Use the sides of the box to line your saw up with the correct angle. Score your cut with the saw first, making sure the cut will be on the waste side of the mark. Then, proceed to use the saw normally to cut through your piece..
Check Stock

Makita P-20177 Guide Rail Connector Kit, 2/pk

  • Joins guide rails in two locations allowing for maximum connectivity.
  • Joins guide rails for making longer dead-on straight or bevel cuts.
  • Durable steel construction for long life.
  • For use with Makita 118" Guide rail (194367-7), 55" Guide rail (194368-5), 39" Guide rail (199140-0), as well as select competitor rails.
Check Stock

POWERTEC 71387 55\ Guide Rail Joining Set & WEN CT1065 10-Amp 6.5-Inch Plunge Cut Sidewinder Circular Track Saw

  • Product 1: Kit includes: (2) 55” guide rails and (2) track saw guide rail connectors.
  • Product 1: Function: This exclusive track saw track connector kit conveniently helps you to align your saws, while connecting one guide rail to another guide rail.
  • Product 1: Premium quality: Made from professional grade extruded aluminum for high performance use, long lasting durability and dependable rust resistance for all of your track saw applications and woodworking projects.
  • Product 1: Compatibility: The 55” GUIDE rails is compatible with Makita plunge saw and Festool track saws.
  • Product 2: Ditch the table saw: rip boards up to 2-1/3 inches thick with clean, splinter-free cuts.
  • Product 2: Create 45-degree bevel cuts in boards up to 1-5/8 inches thick.
  • Product 2: Perfect for ripping boards or for performing internal plunge cuts.
  • Product 2: Includes a 6.5-inch 24-tooth carbide-tipped blade (165 mm) with a 20 mm arbor.
Check Stock

DEWALT 12-Inch Compound Miter Saw Double-Bevel, 15-Amp (DW716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2x8-Inch dimensional lumber at 90 and a 2x6-Inch dimensional lumber at 45.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 - 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity.
  • Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)

  • POWER AND DURABILITY: 15 amp, 3,800 rpm motor.
  • MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops.
  • MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents.
  • EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts.
  • CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°.
  • DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material.
  • OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy.
  • LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability.
  • INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base.
Check Stock

Monster Jam Steel Titans - Xbox One (Xbox One)

  • ACCURACY: The hand miter saw has cam-shaped pins twist and lock with honeycomb base to secure work for accurate cuts.
  • MULTIPLE CUT ANGLES: Cuts mitres on 45-degree and 90-degree angles and face angles on 45 degree and 22.5 degree for octagonal shapes.
  • Extended lip on base holds mitre box in place while cutting and a built-in saw stop helps prevent cutting into mitre box.
  • CONVENIENT STORAGE: Molded-in storage bins to hold cam pins and pencil.
Check Stock